Pioneer VSX-D409 Hints on speaker placement, Overhead view of speaker set up, Speaker terminals

Page 15

Connecting Your Equipment

7 Speaker terminals

1 Twist exposed wire

2 Loosen speaker

3 Tighten terminal.

strands together.

terminal and insert

 

 

exposed wire.

 

1/2 inches

Use good quality speaker wire to connect the speakers to the receiver.

1Twist around 1/2 inch of bare wire strands together.

2 Unclip the speaker terminal and insert the wire.

»

3 Snap shut the speaker terminal to secure.

 

 

á

Hints on speaker placement

Speakers are usually designed with a particular placement in mind. Some are designed to be floorstanding, while others should be placed on stands to sound their best. Some should be placed near a wall; others should be placed away from walls. Follow the guidelines on placement that the speaker manufacturer provided with your particular speakers to get the most out of them.

Set up

•Place the front left and right speakers at equal distances from the TV.

•When placing speakers near the TV, we recommend using magnetically shielded speakers to prevent possible interference, such as discoloration of the picture when the TV is switched on. If you do not have magnetically shielded speakers and notice discoloration of the TV picture, move the speakers farther away from the TV.

•Install the center speaker above or below the TV so that the sound of the center channel is localized at the TV screen.

CAUTION!

If you choose to install the center speaker on top of the TV, be sure to secure it with putty, or by other suitable means, to reduce the risk of damage or injury resulting from the speaker falling from the TV in the event of external shocks such as earthquakes.

•If possible, install the surround speakers slightly above ear level.

•Try not to install the surround speakers farther away from the listening position than the front and center speakers. Doing so can weaken the surround sound effect.

To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed securely to prevent accidents and improve sound quality.

Overhead view of speaker set up

FrontFront

Left Center Right

Sub

Woofer

Surround

Surround

Left

Right

Listening

Position

3-D view of speaker set up

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VSX-D509S Information to User For Canadian modelImportant Safety Instructions Features Table of Contents When Making Cable Connections Checking the Supplied AccessoriesUsing this Manual Installing the ReceiverOperating other Pioneer components Preparing the Remote ControlOperating range of remote control unit Loading the batteriesAudio cords Connecting Your EquipmentConnecting Audio Components Cassette deck placementConnecting DVD 5.1 Channel Components AC outlet switched 100 W 0.8 a maxDo not connect a heater, TV, etc Video Connecting Video ComponentsFront Audio/Video cordsDigital audio cord Optical cable Or standard video cord Connecting Digital ComponentsDigital audio cords/Optical cables DVD player CD player CD recorderExample of connection using a DVD/LD or LD player When playing LD recorded in Dolby DigitalRF demodulator RFD-1 DVD/LD player Or LD player Using external antennas Connecting AntennasConnecting Speakers Powered sub wooferFront Speakers a Speaker terminals Hints on speaker placementOverhead view of speaker set up View of speaker set upPreparations Setting Up for Surround SoundSpeakers Front, Center, Surround setting mode Press % or Þ to select sub woofer ON, Plus or SUB Woofer ON/PLUS/OFF setting modeCrossover frequency setting mode LFE attenuator setting modeSpeakers from the main listening position up Low cut filter ON/OFF setting modeCenter speaker distance setting mode Press % or Þ to set the distance of the FrontDynamic range control setting mode Optical digital input setting Press % or Þ to select the optical digital inputDVD, TV, CD, CD-R, VCR, or OFF VSX-D509S Press Test Tone to turn off the test tonePress Setup to exit the preset mode Setting Up the Remote ControlRecalling preset codes VSX-D509S Setup codeTo cancel the preset mode at any time Recalling preset codes VSX-D409Press Remote SET UP to exit the preset mode To program operations for another component Press Setup and hold for 3 secondsPress Setup to exit the Learning setup Mode To cancel Learning setup modePress any Multi Control button Press 9, 8, then Clearing One of the Remote Control Settings VSX-D509SClearing All the Remote Control Settings Press Setup and hold for three secondsDirect Function Press the Multi Control button which you want to set to OFFMulti Control LED on the remote will blink twice Checking Preset Codes VSX-D509SPress the Multi Control button which you Want to change PressFront Panel Displays & ControlsDisplay Signal Select indicatorsNUMBER/MODE buttons see pages 23 Remote Control VSX-D509SSource button Multi Control buttonsSetup button see p.27 TV Volume +/- buttonsButton Direct Access Master Volume +/- buttonsRemote Control VSX-D409 DSP mode see pagesSee pages 38 Receiver Power button TV Power buttonMPX Mode button see Access button seeAdvanced Theater modes Standard modeSound Modes Learning about the Sound ModesSignal Select Switching ANALOG/DIGITAL Signal InputPress Signal Select to select the input Signal corresponding to the sourceWant to playback Playing Sources with Dolby Digital or DTS SoundSelecting a Sound Mode Using in Midnight Listening Mode DVD 5.1 ch. input playback VSX-D409Press Midnight Playing a Source Advanced Theater mode Dolby/DTS modeSwitch the Dolby/DTS mode on and off by Pressing 2 on the remote control orPress the Multi Control TUN button Using the TunerMPX mode Finding a StationMemorizing Stations Use the number buttons to enterFrequency of the radio station Recalling Memorized Stations Press Class to select one of the three classesRepeat steps 1 to 4 to memorize up to 30 stations Record Monitor Making a RecordingMaking an Audio or a Video Recording Prepare the program sourceCD/MD/CD-R/VCR/LD Player Controls Controlling the Rest of Your SystemPossible on all models Cassette Deck ControlsRecord Button VSX-D509S only Menu VSX-D409 only= 5 Number buttons DVD/DVR Player ControlsDTV Controls Cable TV/Satellite TV/TV Controls FM broadcasts TroubleshootingSymptom Cause Remedy Additional InformationAdditional Information JVC Preset Code List VSX-D509SNTC MCS KLH Preset Code List VSX-D409 Specifications Listening EIA0 4 2 1 1 4 0

VSX-D409, VSX-D509S specifications

The Pioneer VSX-D509S and VSX-D409 are two standout receivers from Pioneer's lineup, renowned for their robust performance and user-friendly features. Designed for home theater enthusiasts, both models offer a solid foundation for an immersive audio experience.

The VSX-D509S features a power output of 100 watts per channel at 8 ohms, ensuring ample power to drive a variety of speakers with clarity and depth. Its dual-zone capability allows users to enjoy two different audio sources in separate areas, making it an excellent choice for larger homes or multi-room audio setups. The receiver also includes Dolby Digital and DTS decoding, giving users access to high-quality surround sound for a more engaging movie and music experience.

Meanwhile, the VSX-D409 also offers a respectable 100 watts per channel, delivering dynamic range and sound fidelity that enhances any listening environment. Although it lacks some of the advanced features of the 509S, it still provides a solid surround sound experience through Dolby Digital and DTS processing capabilities.

Both models come equipped with Pioneer's innovative MCACC (Multi-Channel Acoustic Calibration System), allowing for automated speaker calibration. This technology automatically adjusts levels and delays, optimizing the sound for various room acoustics, and ensuring that users can enjoy their media in the best possible quality.

In terms of connectivity, the VSX-D509S and VSX-D409 come with multiple inputs, including optical and coaxial digital audio inputs, ensuring compatibility with a wide range of audio sources. They also feature composite and S-Video inputs for video devices, providing versatility for users with different systems.

The design of these receivers is sleek and functional, making them a stylish addition to any home entertainment setup. The user-friendly interface and remote control provide easy access to settings and features, allowing users to tailor their listening experience effortlessly.

In summary, the Pioneer VSX-D509S and VSX-D409 are excellent choices for anyone looking to enhance their home theater experience. With powerful amplification, advanced decoding technologies, speaker calibration, and versatile connectivity options, these receivers accommodate both audiophiles and casual listeners alike, making them valuable components in any audio system.
Top Page Image Contents