Pioneer VSX-D509S, VSX-D409 SUB Woofer ON/PLUS/OFF setting mode, Crossover frequency setting mode

Page 18

Preparations

SUB WOOFER ON/PLUS/OFF setting mode

Sets whether the SUB WOOFER is used or not. Also, when used you have the option to use the “PLUS” setting.

• Initial setting is “ON”.

memo • Setting the front speaker size to “Small” in the SPEAKERS setting mode automatically locks the sub woofer in the “ON” position.

Use the PLUS for extra bass. When you use PLUS you will get the bass sounds from the sub woofer even if the front speakers are set to “Large”.

dB

Press % or Þ to select sub woofer ON, PLUS or

OFF.

Crossover frequency setting mode

Crossover frequency is the point where the receiver divides the high and low sounds (the frequencies) between the speakers. Since most smaller speakers can’t handle deep bass tones, this setting allows you to send those sounds to the sub woofer (or speakers set to “Large” if you don’t have a sub woofer) instead of the speakers set to “Small” in your system. Choose the point at which you want the frequency routed to the sub woofer (or “Large” speakers).

We recommend setting this to 200 Hz if smaller bookshelf-type speakers are used for your “Small” speakers.

• Initial setting is “100 Hz”.

memo • If all speakers (front, center, and surround) are set to “Large” in SPEAKERS setting mode, crossover frequency cannot be set because there are no “Small” speakers (*** appears in the display).

dB

100Hz150Hz

200Hz

Press % or Þ to specify the crossover frequency for your small speakers (100 Hz, 150 Hz or 200 Hz).

100 Hz

Sends bass frequencies below 100 Hz to the sub woofer (or “Large” speakers).

150 Hz

Sends bass frequencies below 150 Hz to the sub woofer (or “Large” speakers).

200 Hz

Sends bass frequencies below 200 Hz to the sub woofer (or “Large” speakers).

LFE attenuator setting mode

Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as needed to prevent the ultra-low bass tones from distorting the sound from the speakers.

• Initial setting is “0 dB”.

memo • When is selected (∗∗ appears in the display), LFE is not available.

Press % or Þ to set the attenuation level (0 dB,

dB

10 dB or ∗∗ dB()).

 

0 dB 10 dB

(display "**")

18

Image 18
Contents VSX-D509S For Canadian model Information to UserImportant Safety Instructions Features Table of Contents Installing the Receiver Checking the Supplied AccessoriesUsing this Manual When Making Cable ConnectionsLoading the batteries Preparing the Remote ControlOperating range of remote control unit Operating other Pioneer componentsCassette deck placement Connecting Your EquipmentConnecting Audio Components Audio cordsConnecting DVD 5.1 Channel Components AC outlet switched 100 W 0.8 a maxDo not connect a heater, TV, etc Audio/Video cords Connecting Video ComponentsFront VideoDVD player CD player CD recorder Connecting Digital ComponentsDigital audio cords/Optical cables Digital audio cord Optical cable Or standard video cordExample of connection using a DVD/LD or LD player When playing LD recorded in Dolby DigitalRF demodulator RFD-1 DVD/LD player Or LD player Connecting Antennas Using external antennasConnecting Speakers Powered sub wooferFront Speakers a View of speaker set up Hints on speaker placementOverhead view of speaker set up Speaker terminalsSetting Up for Surround Sound PreparationsSpeakers Front, Center, Surround setting mode LFE attenuator setting mode SUB Woofer ON/PLUS/OFF setting modeCrossover frequency setting mode Press % or Þ to select sub woofer ON, Plus orPress % or Þ to set the distance of the Front Low cut filter ON/OFF setting modeCenter speaker distance setting mode Speakers from the main listening position upDynamic range control setting mode Optical digital input setting Press % or Þ to select the optical digital inputDVD, TV, CD, CD-R, VCR, or OFF Press Test Tone to turn off the test tone VSX-D509SSetup code Setting Up the Remote ControlRecalling preset codes VSX-D509S Press Setup to exit the preset modeRecalling preset codes VSX-D409 To cancel the preset mode at any timePress Remote SET UP to exit the preset mode To cancel Learning setup mode Press Setup and hold for 3 secondsPress Setup to exit the Learning setup Mode To program operations for another componentPress Setup and hold for three seconds Clearing One of the Remote Control Settings VSX-D509SClearing All the Remote Control Settings Press any Multi Control button Press 9, 8, thenDirect Function Press the Multi Control button which you want to set to OFFMulti Control Press Checking Preset Codes VSX-D509SPress the Multi Control button which you Want to change LED on the remote will blink twiceDisplays & Controls Front PanelSignal Select indicators DisplayMulti Control buttons Remote Control VSX-D509SSource button NUMBER/MODE buttons see pages 23Master Volume +/- buttons TV Volume +/- buttonsButton Direct Access Setup button see p.27Remote Control VSX-D409 DSP mode see pagesSee pages 38 Access button see TV Power buttonMPX Mode button see Receiver Power buttonLearning about the Sound Modes Standard modeSound Modes Advanced Theater modesSignal corresponding to the source Switching ANALOG/DIGITAL Signal InputPress Signal Select to select the input Signal SelectPlaying Sources with Dolby Digital or DTS Sound Want to playbackSelecting a Sound Mode Using in Midnight Listening Mode DVD 5.1 ch. input playback VSX-D409Press Midnight Pressing 2 on the remote control or Advanced Theater mode Dolby/DTS modeSwitch the Dolby/DTS mode on and off by Playing a SourceFinding a Station Using the TunerMPX mode Press the Multi Control TUN buttonMemorizing Stations Use the number buttons to enterFrequency of the radio station Recalling Memorized Stations Press Class to select one of the three classesRepeat steps 1 to 4 to memorize up to 30 stations Prepare the program source Making a RecordingMaking an Audio or a Video Recording Record MonitorControlling the Rest of Your System CD/MD/CD-R/VCR/LD Player ControlsMenu VSX-D409 only Cassette Deck ControlsRecord Button VSX-D509S only Possible on all modelsDVD/DVR Player Controls = 5 Number buttonsDTV Controls Cable TV/Satellite TV/TV Controls Additional Information TroubleshootingSymptom Cause Remedy FM broadcastsAdditional Information Preset Code List VSX-D509S JVCNTC MCS KLH Preset Code List VSX-D409 Specifications EIA Listening0 4 2 1 1 4 0

VSX-D409, VSX-D509S specifications

The Pioneer VSX-D509S and VSX-D409 are two standout receivers from Pioneer's lineup, renowned for their robust performance and user-friendly features. Designed for home theater enthusiasts, both models offer a solid foundation for an immersive audio experience.

The VSX-D509S features a power output of 100 watts per channel at 8 ohms, ensuring ample power to drive a variety of speakers with clarity and depth. Its dual-zone capability allows users to enjoy two different audio sources in separate areas, making it an excellent choice for larger homes or multi-room audio setups. The receiver also includes Dolby Digital and DTS decoding, giving users access to high-quality surround sound for a more engaging movie and music experience.

Meanwhile, the VSX-D409 also offers a respectable 100 watts per channel, delivering dynamic range and sound fidelity that enhances any listening environment. Although it lacks some of the advanced features of the 509S, it still provides a solid surround sound experience through Dolby Digital and DTS processing capabilities.

Both models come equipped with Pioneer's innovative MCACC (Multi-Channel Acoustic Calibration System), allowing for automated speaker calibration. This technology automatically adjusts levels and delays, optimizing the sound for various room acoustics, and ensuring that users can enjoy their media in the best possible quality.

In terms of connectivity, the VSX-D509S and VSX-D409 come with multiple inputs, including optical and coaxial digital audio inputs, ensuring compatibility with a wide range of audio sources. They also feature composite and S-Video inputs for video devices, providing versatility for users with different systems.

The design of these receivers is sleek and functional, making them a stylish addition to any home entertainment setup. The user-friendly interface and remote control provide easy access to settings and features, allowing users to tailor their listening experience effortlessly.

In summary, the Pioneer VSX-D509S and VSX-D409 are excellent choices for anyone looking to enhance their home theater experience. With powerful amplification, advanced decoding technologies, speaker calibration, and versatile connectivity options, these receivers accommodate both audiophiles and casual listeners alike, making them valuable components in any audio system.