Pioneer VSX-D509S, VSX-D409 manual For Canadian model, Information to User

Page 2

Congratulations on buying this fine Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

THE POWER SWITCH IS SECONDARY CONNECTED AND THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS POWER IN STANDBY POSITION.

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT NOTICE

The serial number for this equipment is located on the base. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security.

[For Canadian model]

This Class B digital apparatus complies with Canadian ICES-003.

[Pour le modèle Canadien]

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

[For Canadian model]

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTEN- SION CORD, RECEPTACLE OR OTHER OUTLET UN- LESS THE BLADES CAN BE FULLY INSERTED TO PRE- VENT BLADE EXPOSURE.

ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSERESS A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents VSX-D509S For Canadian model Information to UserImportant Safety Instructions Features Table of Contents Installing the Receiver Checking the Supplied AccessoriesUsing this Manual When Making Cable ConnectionsLoading the batteries Preparing the Remote ControlOperating range of remote control unit Operating other Pioneer componentsCassette deck placement Connecting Your EquipmentConnecting Audio Components Audio cordsDo not connect a heater, TV, etc Connecting DVD 5.1 Channel ComponentsAC outlet switched 100 W 0.8 a max Audio/Video cords Connecting Video ComponentsFront VideoDVD player CD player CD recorder Connecting Digital ComponentsDigital audio cords/Optical cables Digital audio cord Optical cable Or standard video cordRF demodulator RFD-1 DVD/LD player Or LD player Example of connection using a DVD/LD or LD playerWhen playing LD recorded in Dolby Digital Connecting Antennas Using external antennasFront Speakers a Connecting SpeakersPowered sub woofer View of speaker set up Hints on speaker placementOverhead view of speaker set up Speaker terminalsSetting Up for Surround Sound PreparationsSpeakers Front, Center, Surround setting mode LFE attenuator setting mode SUB Woofer ON/PLUS/OFF setting modeCrossover frequency setting mode Press % or Þ to select sub woofer ON, Plus orPress % or Þ to set the distance of the Front Low cut filter ON/OFF setting modeCenter speaker distance setting mode Speakers from the main listening position upDynamic range control setting mode DVD, TV, CD, CD-R, VCR, or OFF Optical digital input settingPress % or Þ to select the optical digital input Press Test Tone to turn off the test tone VSX-D509SSetup code Setting Up the Remote ControlRecalling preset codes VSX-D509S Press Setup to exit the preset modeRecalling preset codes VSX-D409 To cancel the preset mode at any timePress Remote SET UP to exit the preset mode To cancel Learning setup mode Press Setup and hold for 3 secondsPress Setup to exit the Learning setup Mode To program operations for another componentPress Setup and hold for three seconds Clearing One of the Remote Control Settings VSX-D509SClearing All the Remote Control Settings Press any Multi Control button Press 9, 8, thenMulti Control Direct FunctionPress the Multi Control button which you want to set to OFF Press Checking Preset Codes VSX-D509SPress the Multi Control button which you Want to change LED on the remote will blink twiceDisplays & Controls Front PanelSignal Select indicators DisplayMulti Control buttons Remote Control VSX-D509SSource button NUMBER/MODE buttons see pages 23Master Volume +/- buttons TV Volume +/- buttonsButton Direct Access Setup button see p.27See pages 38 Remote Control VSX-D409DSP mode see pages Access button see TV Power buttonMPX Mode button see Receiver Power buttonLearning about the Sound Modes Standard modeSound Modes Advanced Theater modesSignal corresponding to the source Switching ANALOG/DIGITAL Signal InputPress Signal Select to select the input Signal SelectPlaying Sources with Dolby Digital or DTS Sound Want to playbackSelecting a Sound Mode Press Midnight Using in Midnight Listening ModeDVD 5.1 ch. input playback VSX-D409 Pressing 2 on the remote control or Advanced Theater mode Dolby/DTS modeSwitch the Dolby/DTS mode on and off by Playing a SourceFinding a Station Using the TunerMPX mode Press the Multi Control TUN buttonFrequency of the radio station Memorizing StationsUse the number buttons to enter Repeat steps 1 to 4 to memorize up to 30 stations Recalling Memorized StationsPress Class to select one of the three classes Prepare the program source Making a RecordingMaking an Audio or a Video Recording Record MonitorControlling the Rest of Your System CD/MD/CD-R/VCR/LD Player ControlsMenu VSX-D409 only Cassette Deck ControlsRecord Button VSX-D509S only Possible on all modelsDVD/DVR Player Controls = 5 Number buttonsDTV Controls Cable TV/Satellite TV/TV Controls Additional Information TroubleshootingSymptom Cause Remedy FM broadcastsAdditional Information Preset Code List VSX-D509S JVCNTC MCS KLH Preset Code List VSX-D409 Specifications EIA Listening0 4 2 1 1 4 0

VSX-D409, VSX-D509S specifications

The Pioneer VSX-D509S and VSX-D409 are two standout receivers from Pioneer's lineup, renowned for their robust performance and user-friendly features. Designed for home theater enthusiasts, both models offer a solid foundation for an immersive audio experience.

The VSX-D509S features a power output of 100 watts per channel at 8 ohms, ensuring ample power to drive a variety of speakers with clarity and depth. Its dual-zone capability allows users to enjoy two different audio sources in separate areas, making it an excellent choice for larger homes or multi-room audio setups. The receiver also includes Dolby Digital and DTS decoding, giving users access to high-quality surround sound for a more engaging movie and music experience.

Meanwhile, the VSX-D409 also offers a respectable 100 watts per channel, delivering dynamic range and sound fidelity that enhances any listening environment. Although it lacks some of the advanced features of the 509S, it still provides a solid surround sound experience through Dolby Digital and DTS processing capabilities.

Both models come equipped with Pioneer's innovative MCACC (Multi-Channel Acoustic Calibration System), allowing for automated speaker calibration. This technology automatically adjusts levels and delays, optimizing the sound for various room acoustics, and ensuring that users can enjoy their media in the best possible quality.

In terms of connectivity, the VSX-D509S and VSX-D409 come with multiple inputs, including optical and coaxial digital audio inputs, ensuring compatibility with a wide range of audio sources. They also feature composite and S-Video inputs for video devices, providing versatility for users with different systems.

The design of these receivers is sleek and functional, making them a stylish addition to any home entertainment setup. The user-friendly interface and remote control provide easy access to settings and features, allowing users to tailor their listening experience effortlessly.

In summary, the Pioneer VSX-D509S and VSX-D409 are excellent choices for anyone looking to enhance their home theater experience. With powerful amplification, advanced decoding technologies, speaker calibration, and versatile connectivity options, these receivers accommodate both audiophiles and casual listeners alike, making them valuable components in any audio system.
Top Page Image Contents