Shure MX692 manual Removing the Grille

Page 11

REMOVING THE GRILLE

1.Open the battery compartment

2.Remove the battery

3.Loosen and remove the screw at the base of the battery compartment

4.Remove the retainer from the top of the micro- phone

5.Insert the screwdriver into the opening above the battery compartment

6.Press gently on the underside of the microphone grille with the tip of the screwdriver until the grille pops out

English – 10

Image 11

Contents Model MX692 User Guide Table of Contents English Introduction Microphone is active when lit MX692 Features and ControlsTalker’s voice Checking and Replacing the Battery Changing the Transmitter GROUP/CHANNEL Settings Adjusting the Transmitter Gain Level Positioning the Microphone Positioning Multiple Microphones Positioning the Receiver Removing the Grille Additional or Replacement Cartridges Internal DIP Switches Customizing Microphone Switch Functionality Tips for Optimum Performance Using the MX692 in Large InstallationsTroubleshooting Polarity SpecificationsCertifications and Licensing Audio Circuitry