Shure manual Tips for Optimum Performance, Using the MX692 in Large Installations

Page 15

TIPS FOR OPTIMUM PERFORMANCE

Maintain a line of sight between transmitter and receiver antennas.

Avoid using the MX692 microphone on metal surfaces.

Avoid placing laptop computers or other obstructions in front of the microphone during use.

The MX692 wireless microphone/transmitter must be used with the Shure UC4 wireless receiver.

USING THE MX692 IN LARGE INSTALLATIONS

When using multiple receivers in a single location, use successive channels within the same group.

Use the UA845 UHF Antenna Distribution System to split the signal from one pair of an- tennas to multiple UC4 receivers.

To improve RF reception, use the UA500 Remote Mount Antenna Kit to mount 1/2-wave receiver antennas closer to the transmitters.

For installations with long cable runs, use the UA830 UHF In-Line Antenna Amplifier. If a cable run exceeds 50 ft., two UA830’s may be chained together.

English – 14

Image 15
Contents Model MX692 User Guide Table of Contents English Introduction Microphone is active when lit MX692 Features and ControlsTalker’s voice Checking and Replacing the Battery Changing the Transmitter GROUP/CHANNEL Settings Adjusting the Transmitter Gain LevelPositioning the Microphone Positioning Multiple Microphones Positioning the Receiver Removing the Grille Additional or Replacement Cartridges Internal DIP Switches Customizing Microphone Switch Functionality Tips for Optimum Performance Using the MX692 in Large InstallationsTroubleshooting Polarity SpecificationsCertifications and Licensing Audio Circuitry