Shure MX692 manual Checking and Replacing the Battery

Page 6

CHECKING AND REPLACING THE BATTERY

To check the battery charge:

1.Turn the transmitter switch to on

2.Verify that one of the battery power LEDs is glowing (see page 3).

3.The amount of battery life remaining is indicated by which LED is lit, as shown in the following table:

Transmitter LED Color	Remaining Operating Time
Green	2 to 8 hours

Amber	45 minutes to 2 hours
Red	45 minutes or less

Replacing the battery:

1

2

3

	4
	9
D	8

For extended performance, use a 9V lithium battery. Rechargeable, carbon-zinc, and zinc- chloride batteries are not recommended.

English – 5

Image 6

Contents Model MX692 User Guide Table of Contents English Introduction MX692 Features and Controls Microphone is active when litTalker’s voice Checking and Replacing the Battery Adjusting the Transmitter Gain Level Changing the Transmitter GROUP/CHANNEL SettingsPositioning the Microphone Positioning Multiple Microphones Positioning the Receiver Removing the Grille Additional or Replacement Cartridges Internal DIP Switches Customizing Microphone Switch Functionality Using the MX692 in Large Installations Tips for Optimum PerformanceTroubleshooting Specifications PolarityCertifications and Licensing Audio Circuitry