Shure WH30XLR manual Wearing, Adjusting the Headset

Page 4

English

FIGURE 2. WEARING THE	FIGURE 3. POSITIONING THE
HEADSET	MICROPHONE

ADJUSTING THE HEADSET

•If the headset feels loose or uncomfortable, carefully bend the sides of the wireframe to make it tighter or looser (see Figure 4A). The angle of the wire- frame earpieces may also need adjustment (see Figure 4B).

•Adjust the tension of the elastic headband across the back of the head by slid- ing it up or down the ends of the wireframe (see Figure 5).

FIGURE 4. ADJUSTING THE WIREFRAME

Image 4

Contents Model WH30 Condenser Headset Microphone Introduction FeaturesModel Variations Collapsible Microphone Boom Microphone PartsWearing the Headset Adjusting the Headset WearingUsing the Cable Retainer and Clothing Clip Wired Applications WH30XLRPositioning the Microphone Washing the Elastic HeadbandWashing the Foam Windscreen Replacement PartsCertification Specifications WH30 Typical Frequency Response Wiring Diagrams Model WH30TQG

FIGURE 2. WEARING THE

FIGURE 3. POSITIONING THE

ADJUSTING THE HEADSET

FIGURE 4. ADJUSTING THE WIREFRAME