3.Wash the headband in mild, soapy water and rinse it in clean water.
4.Allow the headband to
5.Slide the headband around the wireframe to its original position. Reattach the cable with the plastic retainer.
WASHING THE FOAM WINDSCREEN
The foam windscreen protects the WH30’s
1.Hold the windscreen loosely by the plastic retaining ring at its base.
2.Gently pull the windscreen away from microphone. The plastic retaining ring will expand to allow the windscreen to slip off the microphone. If necessary, you can expand the ring manually with a small screwdriver as you pull the windscreen.
3.Immerse the windscreen in mild soapy water and gently squeeze it several times.
4.Rinse the windscreen in clean water and dry it with a clean cloth or paper tow- el. Allow it to
5.When the windscreen is dry, slide it over the WH30 microphone until the re- taining ring snaps into place.
CERTIFICATION
The WH30XLR conforms to European EMC Directive 89/336/EEC, and is eligible to bear the CE marking. Meets applicable tests and performance criteria in European standard EN 55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. The WH30TQG conforms to European EMC Directive 89/33/EEC, and is eligible to bear the CE marking. Meets EMC
REPLACEMENT PARTS
Cable Connector (for WH30TQG only) . . . . . . . . . . . . . . . . . . . . . . . . . . . WA330 Connector Belt Clip (for WH30XLR only) . . . . . . . . . . . . . . . . . . . . . . . RK200BC Elastic Headband . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80A505B Wireframe, Headband, Boom Hinge, Boom, Shock Mount,
Cartridge Housing and Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RPM520 Preamplifier Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RPM420 Black Windscreens (2) and Clothing Clip . . . . . . . . . . . . . . . . . . . . . . 90WP1371
English
5