Using the Cable Retainer and Clothing Clip

English

FIGURE 5. ELASTIC HEADBAND ADJUSTMENT

USING THE CABLE RETAINER AND CLOTHING CLIP

Use the cable retainer on the wire frame of the headset to position the microphone cable as desired. The supplied spring-loaded clothing clip secures the microphone cable to the user’s clothing to help avoid entanglement.

POSITIONING THE MICROPHONE

For maximum gain-before-feedback, position the microphone and boom so that the microphone is within 13 mm (1/2 inch) of the right corner of your mouth (see Figure 3). This will also help minimize breath noise or “popping”.

CONNECTING THE WH30 TO A SOUND SYSTEM

WIRELESS APPLICATIONS (WH30TQG)

1.Connect the mini TA4F connector from the WH30 to a wireless microphone transmitter such as the Shure T1 bodypack transmitter.

2.See the user guide for your wireless transmitter and receiver system for ad- justing gain and other parameters.

WIRED APPLICATIONS (WH30XLR)

Connect the output of the RPM420 preamplifier to an input channel of a mixing or recording console. Most consoles will provide phantom power to the RMP420 preamplifier. If phantom power is unavailable, use a separate phantom power supply such as the Shure PS1A.

WASHING THE ELASTIC HEADBAND

When necessary, remove and wash the elastic headband according to these steps.

1.Remove the microphone cable retainer from the wireframe.

2.Slide the elastic headband off the wireframe.