Certifications, Furnished Accessory | Shure 565SD specification

Polar Pattern

Cardioid (unidirectional)-uniform with frequency, symmetrical about axis

	180°			180°
150°	150°		150°	150°
120°		120°	120°	120°
90°		90°	90°	90°
	–20 dB			–20 dB
	–15 dB			–15 dB
60°	–10 dB	60°	60°	60°
	–10 dB			–10 dB
	–5 dB			–5 dB
30°	30°		30°	30°
	0			0
	125 Hz			2000 Hz
	500 Hz			400 Hz
	1000 Hz			8000 Hz

lmpedance

Dual. Microphone rating impedance is 150 ohms (250 ohms ac- tual) for connection to microphone inputs rated at 19 to 300 ohms and “High” for connection to high-impedance microphone inputs.

Wired for low impedance as supplied. To change impedance, see sections on lmpedance Selection and Connections.

Output Level (at 1,000 Hz)

	“L”	“H”

Open Circuit Voltage*	-56.0 dB	-34.0 dB
	(1.6 mV)	(20 mV)

*0 dB = 1 volt per Pascal (1 Pa = 94 dB SPL)

Polarity

Positive pressure on diaphragm produces positive voltage on pin 2 (with respect to pin 3).

REED	CARTRIDGE	TRANSFORMER		XLR CONNECTOR
SWITCH	CARTRIDGE	TRANSFORMER		XLR CONNECTOR
SWITCH
	CODED TERMINAL
	GREEN	GREEN	RED
			RED
	BLACK		BLUE
			WHITE
	YELLOW	YELLOW	BLACK

IMPEDANCE SELECTION SOCKET (SHOWN IN LOW IMPEDANCE POSITION)

Switch

Built-in magnetic reed on/off switch with lockplate. To lock switch in the ON position, remove screw on lockplate and turn lockplate 180°. Reassemble and tighten screw.

Cartridge Shock Mount

Internal rubber vibration-isolator

Cable

565SD-CN: 6.1 m (20 ft) two-conductor shielded, rubber-jacket- ed, detachable, with XLR connectors.

Swivel Adapter

Positive action, adjustable through 90° from vertical to horizon- tal, permits easy removal for handheld use, suitable for mount- ing on stand with 5/8"-27 thread

Case

Chrome-plated die casting with steel mesh grille

Dimensions

	161 mm
	(6 7/16 in.)
22 mm	93 mm
(7/8 in.)	(3 11/16 in.)
51 mm	23 mm
(2 in.)	(15/16 in.)

34 mm (1 11/32 in.)

Net Weight (less cable)

298 grams (10.5 oz)

CERTIFICATIONS

Eligible to bear CE Marking. Conforms to European EMC Direc- tive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residen- tial (E1) and light industrial (E2) environments.

FURNISHED ACCESSORY

Swivel Adapter

A25D

REPLACEMENT PARTS

Cartridge	R65
Screen and Grille	RS65
Plug Element	RK169P

OPTIONAL ACCESSORIES

Line Matching Transformer	............................A95 Series
Desk Stand	S37A, S39A
Isolation Mount	A55M
Dual Mount	A26M
Windscreen	A58WS Series
Cable, LO-Z (7.6 m [25 ft])	C25J
Cable, HI-Z (6.1 m [20 ft])	C20HZ