Pioneer VSX-41 Additional information Troubleshooting, Adjust the Master Volume, Receiver, Noise

Page 67

Additional information

10

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

Problem

Remedy

The power does not turn on.

•Connect the power plug to the wall outlet.

•Disconnect the power plug from the outlet, and insert again.

•Make sure there are no loose strands of speaker wire touching the rear panel. This could cause the receiver to shut off automatically.

No sound is output when a function is selected.

•Make sure the component is connected correctly (refer to pages 13–18).

•Press MUTE on the remote control to turn muting off.

•Adjust the MASTER VOLUME.

•Press the MONITOR button to turn monitoring off.

No image is output when a function is selected.

•Make sure the component is connected correctly (refer to pages 13–18).

•Select the correct component (use the MULTI JOG/INPUT SELECTOR dial or the MULTI CONTROL buttons on the remote).

Considerable noise in radio

• Tune in the correct frequency.

broadcasts.

• Connect the antenna (refer to page 18).

 

• Route all cables away from the antenna terminals and wires.

 

• Fully extend the FM wire antenna, position for best reception,

 

and secure to a wall.

 

• Connect an outdoor FM antenna (refer to page 18).

 

• Adjust the direction and position for best reception.

 

• Connect an additional internal or external AM antenna (refer

 

to page 19).

 

• Turn off the equipment causing the noise or move it away from

 

the receiver.

 

• Place the antenna farther away from the equipment causing

 

the noise.

 

 

Broadcast stations cannot be

• Connect an outdoor antenna (refer to page 18).

selected automatically.

 

 

 

67

En

Page 66 Page 68
Image 67
Page 66 Page 68
Contents VSX-41 Manufactured under license from Important NoticePage Contents Monitoring your recording Improving FM stereo sound Tuning directly to a stationMaking cable connections Installing the receiverOperating range of remote control unit Before you start Checking what’s in the boxMinute guide Introduction to home theater Hook up your DVD player 02 5 minute guide Listening to Surround SoundHook up your TV Connect your speakers Minute guide02 5 minute guide Play a DVD, and adjust the volume to your liking Press Enter 02 5 minute guide Using the Quick SetupPress Quick Setup 0ch 1chComponent video cords Connecting upAudio/Video cords Video cablesOUT Connecting up Connecting digital componentsCD player CD-R/Tape/MD Deck Connecting up Connecting audio componentsConnecting video components Connecting up Connecting DVD 7.1 channel componentsFront panel input selector as VIDEO. There are Connecting to the front panelFront video connections are accessed via Video terminalAM loop antenna Connecting up Connecting antennasFM wire antenna Using external antennasConnecting up Connecting the speakers Speaker terminals Hints on speaker placementB speaker systems View of speaker set up Overhead view of speaker set upDVD 7.1CH Input Connecting up Connecting additional amplifiersOperating other Pioneer components Connecting up AC wall outletAppliance to this Units AC Wall Outlet Controls and Displays Front panel Master VolumeSTANDBY/ON Display Controls and DisplaysATT AnalogDTS PRO LogicControls and Displays Remote control Input ATT RCVEnter DISPLAY/ Disc EnterAudio TV Volume +DTV Menu TOP MenuPlaying sources Introduction to Sound Modes Standard modeStereo/Direct Advanced Surround modes Playing sourcesListening to multichannel playback Playing sources Choosing the input signalUsing Advanced Surround Using Stereo/DirectUsing Loudness and Midnight listening Selecting the multichannel analog inputs Playing sources Using the tone controlsPress Tone to select the frequency you want to adjust Playing other sourcesPress the Re-EQ button on the front panel Using Re-EqualizationRe-equalization is not applied to the headphone mix Setting up the receiver Choosing your receiver setup Speaker setting Setting up the receiverSurround back speaker setting 100Hz 150Hz 200Hz Channel settingSubwoofer setting Crossover frequency settingSurround back speaker distance setting LFE attenuator settingFront speaker distance setting Center speaker distance settingSurround back channel input setting Dynamic range control settingDual mono setting Component video input settingsOptical digital Coaxial digital input settingsOptical digital input settings Coaxial digitalFL C FR SW SL SB Setting the relative volume level of each channelUse Level +/- to adjust the speaker levels in turn When you’re done, press Test Tone to turn off the test toneTuning directly to a station Using the tuner Listening to the radioImproving FM stereo sound Display shows ST. MEMORY, then a blinking memory class Using the tuner Saving station presetsTune to a station you want to memo Rize Press T.EDIT Tuner EditInput the name you want Using the tuner Naming station presetsListening to station presets Choose the station preset you want to nameMaking Recordings Making an audio or a video recording Original source signalMonitoring your recording Selecting preset codes directly Setting the remote to control other componentsLCD display shows Search Setting Up Using Full Library SearchLCD display flashes Pres KEY Searching for preset codes using brand namesBrand then press Remote Setup LCD display shows OKClearing all the remote control settings Erasing one of the remote control button settingsPreset code appears in the display for two seconds Confirming preset codesDirect function SUB Title Controlling the rest of your system Controls for TVsChannel TV VOLEffect Controlling the rest of your systemControls for other components MenuEnter Channel DisplayManufacturer Code Controlling the rest of your system Preset Code List1036, 1086 1096 1055, 1086, 10891013, 1019, 1026, 1027 1032, 10631014 11141013, 1019 1017, 1032, 10891055, 1073 10591006, 1079 11321091, 1107, 1123 White Westinghouse 1017, 1078, 10981017, 1079, 1101 1009, 1010, 10406041 5038, 5045, 5046 5012, 5013, 50426028 5001, 5005, 5008, 50195312 53035304 53207016 7027, 70427007 7002, 70062001, 2017, 2034, 2059 2062, 2085, 2087 2015, 2027, 20322015, 2042 2017, 2018, 20532001, 2021 20192001, 2015, 2023 20254034 40154008 40054062 30074019, 4044 3020, 3031 3044Receiver Additional information TroubleshootingAdjust the Master Volume Place the antenna farther away from the equipment causingRemove the obstacle or operate from another position Additional informationNo sound from surround or center speakers Front panel refer toFM Tuner Section Additional information SpecificationsAmplifier Section Video SectionMiscellaneous Cleaning the unitFurnished Parts Additional information TSWZF/02B00001 Printed XRB3018-A 0 4 2 1 1 4 0

VSX-41 specifications

The Pioneer VSX-41 is a versatile AV receiver that exemplifies the brand's commitment to quality home entertainment. Known for its robust performance, the VSX-41 incorporates advanced technologies and features that cater to audiophiles and casual listeners alike.

One of the standout characteristics of the VSX-41 is its multi-channel amplification system that delivers a powerful output of 100 watts per channel. This ensures that audiences can enjoy their favorite movies and music with rich, immersive sound. The receiver supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for a cinema-quality experience right in the comfort of home.

The VSX-41 also features Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) technology. This system optimizes the sound to suit the specific acoustics of the room, providing a customized listening experience. By analyzing the speakers’ output, MCACC adjusts the levels and equalization settings to ensure that audio playback is balanced and clear, irrespective of room characteristics.

Connectivity is another strong suit for the VSX-41. It comes equipped with multiple HDMI inputs, allowing for seamless integration with various digital devices, such as Blu-ray players, gaming consoles, and streaming devices. This AV receiver is fully compatible with 3D video, ensuring that users can make the most of modern video technology.

In addition to HDMI, the VSX-41 offers a range of inputs, including optical and coaxial digital audio inputs, as well as analog connections. This versatility allows users to hook up virtually any audio source—be it old or new—making it a future-proof choice for home theater enthusiasts.

The VSX-41 also supports various streaming services via its network capabilities. Users can easily access their favorite music channels and playlists through popular services such as Spotify and Pandora. This connectivity is further enhanced by the inclusion of a USB port, making it simple to play music directly from a USB drive.

Furthermore, the receiver is designed with energy efficiency in mind, adhering to Energy Star guidelines. This not only reduces power consumption but also promotes sustainable living without sacrificing audio performance.

Overall, the Pioneer VSX-41 combines power, versatility, and technology, making it an excellent choice for anyone looking to enhance their audio-visual experience at home. With its array of features and high-quality sound reproduction, it stands out in the crowded market of AV receivers, satisfying both audiophiles and everyday users.
Top Page Image Contents