ENGLISH
!WARNING! - Important safety instructions
WARNING: THIS APPARATUS MUST BE EARTHED!
APLEASE read this instruction manual carefully before switching on.
BALWAYS use the supplied mains lead, if a replacement is required please contact your authorised Marshall Dealer.
CNEVER attempt to
DDO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
ERefer all servicing to qualified service personnel including replacement of fuses and valves. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
FNEVER use an amplifier in damp or wet conditions. No objects filled with liquids should be placed on the apparatus. When cleaning, only use a dry cloth.
GALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.
HProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and at the point where they exit from the apparatus.
IDO NOT switch the amplifier on without the loudspeaker connected.
JENSURE that any extension cabinets used are of the correct impedance.
➲EUROPE ONLY 
- Note: This equipment has been tested and found to comply with the requirements of the EMC directive (Environments E1, E2 and E3 EN
➲EUROPE ONLY - Note: The Peak Inrush current for the AVT100 is 22 amps.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
◆Reorient or relocate the receiving antenna.
◆Increase the separation between the equipment and the receiver.
◆Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
◆Consult the dealer or an experienced radio/TV technician for help.
2
WARNING! - Important safety instructions (cont.)
➲Caution: Any changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.
➲Note: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the AVT100 Combo are of a high quality screened type. These should not exceed 10 metres in length. Always use a
➲WARNING: Do not obstruct ventilation grilles and always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS
KEEP THESE INSTRUCTIONS !
3
ENGLISH