Pioneer VSX-AX5Ai-G manual Using the tone control, Switching the tone control on or off, Treble

Page 46

05Listening to your system

Using Midnight and Loudness listening

• Default setting: Off

The Midnight listening feature makes quieter sounds more audible, allowing you to hear effective surround sound at low volume levels.

•You can’t use these modes with sources over 96kHz (including SACD in some cases) when using one of the digital inputs (including i.LINK).

•If you switch on either of these modes when DIRECT is selected, the receiver automatically switches to

STEREO.

The Loudness feature boosts the bass and treble in audio

Using the tone control

sources, useful for listening at low volumes.

You can use the tone control to make customized

 

 

settings for the bass and treble.

MIDNIGHT

RECEIVER

LOUDNESS

RECEIVER

TONE

BASS/TREBLE +

1 Press RECEIVER.

This step is only necessary if you want to use Loudness.

2 Press MIDNIGHT or LOUDNESS to switch the effect on or off.

The mode you’ve selected lights in the display.

Tip

•Multi-voltage model only – You can also switch Midnight or Loudness on or off simply by pressing the

corresponding front panel button:

Switching the tone control on or off

 

 

• Default setting: Off

MIDNIGHT LOUDNESS

You’ll need to switch the tone control on to adjust the

 

bass and treble below.

 

1

If you’re using the remote, press RECEIVER.

 

2

Press TONE to switch the tone control on or off.

 

TONE shows in the display when the tone control is

 

switched on.

Note

Adjusting the bass and treble

•You can’t use the Midnight and Loudness modes at the same time.

•You can’t use these modes with THX CINEMA, MULTI CH IN or SACD DIRECT.

•These modes automatically adjust according to the volume at which you’re listening. However, the volume must be under -20dB for these features to take effect.

• Default setting: Bass: 0, Treble: 0

You can adjust the bass and treble controls separately to adjust the overall tone.

1Press BASS/TREBLE repeatedly to select BASS or

TREBLE.

If you see TONE:BYPASS in the display, the tone control needs to be switched on (see above).

2Use the +/– buttons to adjust the sound.

The bass and treble can be adjusted from –6to +6.

46

En

Page 45 Page 47
Image 46
Page 45 Page 47
Contents VSX-AX5Ai-SVSX-AX5Ai-G Operating Environment Risk of Electric Shock Do not OpenVoltage selector Information to UserContents Other connections Controlling other equipment Advanced setupUsing other functions Additional informationBefore you start FeaturesChecking the supplied accessories Before you start ChapterBefore you start Installing the receiverUsing the remote control Opening the front panelOperating range of the remote control Remote control battery indicatorMinute guide Chapter Setting up for Surround SoundMinute guide Introduction to home theater02 5 minute guide Connect your speakersMinute guide Use the on-screen Auto Surround setup to set up your systemLarge Enter Switch on the receiver and your TV‘Surround Setup’ should be highlighted. Press ‘SurrBack System’ should be highlighted. PressMake sure ‘Normal System’ is selected, then select ‘Exit’ ‘Auto Setting’ should be highlighted. PressFollow the instructions on-screen If the receiver isn’t already on, switch on the power Checking the settings on your DVD or other playerOther problems when using the Auto Surround Setup Playing a sourceConnecting your equipment Chapter Connecting your equipmentRear panel Connecting your equipment About the video converterAnalog audio cables When making cable connectionsAbout cable types Digital audio cablesConnecting your equipment Connecting your TV Connecting your equipment Connecting a DVD player DVD playerConnecting the multichannel analog outputs VSX-AX5AiSTB Connecting your equipment Connecting a VCR or DVD recorder Connecting your equipment Connecting other video sources Connecting your equipment Using the component video jacks DVD playerConnecting your equipment Connecting digital audio sources Connecting your equipment Connecting analog audio sources Tape deck, etcPortable DVD player, etc Connecting your equipment Installing your speaker system Front left Center Front rightBare wire connections Connecting the speakersPlacing the speakers Connecting external antennas Connecting your equipment Connecting antennasFM wire antenna AM loop antennaPlugging in the receiver Outdoor antenna Indoor antenna Vinyl-coated wire MetersAbout the AC outlet Controls and displays Chapter Controls and displaysFront panel Controls and displays Tone Mcacc Setup MIC jackTone Control BASS/TREBLEControls and displays Display TunedControls and displays Remote control TV Input Remote SetupAudio Movie / MusicListening to your system Chapter Listening to your systemAuto playback Listening in surround sound Basic modes Listening to your systemMovie listening modes Advanced effect modesMusic listening modes Dolby Pro Logic IIx Music settingsPro Logic IIx Music See above Neo6 Music settings Listening with headphonesAdjusting the advanced effect level Listening in stereoListening with Acoustic Calibration Listening to your system Selecting the input signal type Listening to your system Using the surround back channel NEO6Using the audio scaler for Hi-bit and Hi-sampling On the remote control, press RECEIVER, then press HI-BITAdjusting the bass and treble Using the tone controlSwitching the tone control on or off TrebleReducing noise during playback Release the button when you see the setting you wantListening to dual mono soundtracks Tuning directly to a station Using the tunerUsing the tuner Chapter Finding a stationUsing the tuner MPX modeNaming station presets Listening to memorized station presetsAbcdefghijklmnopqrstuvwxyz Press Disp Mode to select the RDS information display Using the tuner An introduction to RDSDisplaying RDS information An introduction to EON Using EONPress EON Mode to select one of the possible modes Searching for RDS programsClearing all stations from the RDS and EON searches Press and hold EON Mode for about two secondsPress Enter Making receiver settings from the Surround Setup menu Surround Setup menuSurround Setup menu Chapter Select the setting you want to adjustNormal surround setting Surround Setup menuSurround back speaker setting Speaker SettingSelect ‘Channel Level’ from the Normal setup menu Channel LevelSelect ‘Speaker Distance’ from the Normal setup menu Speaker DistanceControlling other equipment Using the remote control with other componentsRecalling preset codes Controlling other equipment ChapterProgramming signals from other remote controls Controlling other equipmentGuide Controlling other equipment Controls for TVsMenu DiscDisp Controlling other equipment Controls for other componentsSubtitle ModeTOP ExitProgramming a multi-operation or a shutdown sequence Controlling other equipment Direct functionMulti Operation and System Off Repeat steps 2-4 for as many components as you wantTo add or change a command select ‘Change’ and press Enter Using multi operationsPress Multi Operation Using System off Switching components on and off using the 12 volt triggerOperating other Pioneer components with this unit’s sensor Adjusting the delay of a soundtrack Using other functionsUsing other functions Chapter Making an audio or a video recordingEnhancing Sacd playback Dimming the displayAdvanced remote control features Using other functionsSwitching the speaker impedance Editing remote control display namesAdjusting the remote control backlight Clearing remote control settingsUsing other functions Resetting the system Other connections Second Zone speaker B setupSwitching the speaker system Other connections ChapterFront left Bi-wiring your speakersOther connections Bi-amping your front speakers SpeakerOther connections Multi-room listening Basic multi-room setupSurrBack System multi-room setup Making multi-room connectionsOther connections Using the multi-room controlsUse the Master Volume dial to adjust the volume Press ControlConnecting additional amplifiers Other connectionsOther connections Using the i.LINK interface About Pqls rate control Other connections About i.LINKCreating an i.LINK network Press Input on the remote control repeatedly to select USB Other connections Using the USB interfaceConnect your computer’s USB terminal to Advanced Mcacc output using your PC Other connections Connecting a PC for Advanced Mcacc outputSelect ‘PC Output’ and press Enter System Setup menu Advanced setupAdvanced setup Chapter Select the setting you want to adjust then pressInput Assign menu Advanced setupTHX Cinema Setup Assigning the digital inputsComponent-1 OFF Component-2 OFF Assigning the component video inputsAssigning the i.LINK inputs Select ‘Component-In Select’ from the Input Assign menuFunction Rename Select ‘Function Rename’ from the System Setup menuSelect the name of the input you want to rename Sacd Setup PHONO/LINE SetupMulti-Room and IR receiver setup Volt TriggerAdvanced setup Expert setup menu Select ‘Expert’ then press EnterAdjust the level of the left channel Select ‘Crossover Network’ from the Expert setup menuSelect ‘Fine Channel Level’ from the Expert setup menu Crossover NetworkSetting the Acoustic Calibration EQ automatically Fine Channel DelayAcoustic Calibration EQ Select the channels you want and adjust to your liking Setting the Acoustic Calibration EQ manuallySelect CUSTOM1 Adjust or CUSTOM2 Adjust Front AlignSelect ‘DATA COPY’ then press Enter Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Select ‘Exit’ to copy and confirmHow to interpret the graphical output How to use Professional Acoustic CalibrationProfessional Acoustic Calibration Select ‘Professional’ Using Professional Acoustic CalibrationSelect a setup option If you selected ‘Auto Pro.’, select ‘Start’ and pressSelect ‘Bass Peak Level’ from the Expert setup menu Bass Peak LevelChoose the setting that you want Select ‘D-Range Control’ from the Expert setup menuDynamic Range Control Additional information TroubleshootingPower Additional information ChapterAdditional information No soundOther audio problems Digital inputs onSymptom Cause VideoSettings DisplayRemote control PRO Logic II or Neo6Link interface Link messagesChanging the frequency step Maintenance of external surfacesUSB interface Additional information Surround sound formats DolbyAdditional information About THX CD-R Additional information Preset code brandsDVD DVRAdditional information Specifications European model Additional information Specifications Multi-voltage model Continuous Power OutputPioneer Corporation

VSX-AX5Ai-S, VSX-AX5Ai-G specifications

The Pioneer VSX-AX5Ai-S and VSX-AX5Ai-G are standout home theater receivers known for their robust performance and advanced features that cater to audio enthusiasts and casual listeners alike. Designed with a focus on versatility and high-fidelity audio reproduction, these receivers deliver exceptional sound quality for both music and movies.

One of the most significant features of the VSX-AX5Ai series is its powerful amplification system. With a capacity to drive multiple channels, these receivers provide dynamic sound and enough power to fill even large spaces. The Class D3 amplification technology used in these models ensures efficient performance, producing clean and distortion-free audio. This technology contributes to higher energy efficiency while providing rich bass and clear highs.

These receivers are equipped with advanced audio codecs, including Dolby Atmos and DTS:X, which create an immersive surround sound experience. The ability to decode high-definition audio formats enhances the listening experience, bringing movie soundtracks and music to life with precision and depth. The multi-channel setup allows for easy integration into existing home theater systems, delivering a cinematic atmosphere at home.

Another notable feature is the MCACC (Multi-Channel Acoustic Calibration System). This automatic calibration system optimizes speaker settings based on the room's acoustics, ensuring that users achieve the best possible sound from their speaker setup. It analyzes the acoustics and adjusts the receiver's settings to provide a balanced and harmonious sound profile.

Connectivity is a highlight of the VSX-AX5Ai-S and VSX-AX5Ai-G. They come equipped with multiple HDMI inputs and outputs, allowing users to connect various devices, such as Blu-ray players, gaming consoles, and streaming devices. The presence of digital and analog audio inputs ensures compatibility with a wide range of audio sources. Furthermore, these models support video upscaling, enhancing lower-resolution content for improved playback quality.

The user-friendly interface and remote control make it easy to navigate settings and configurations, providing a seamless user experience. Additionally, both models support streaming services, allowing users to access their favorite music directly from apps over Wi-Fi.

In summary, the Pioneer VSX-AX5Ai-S and VSX-AX5Ai-G are exceptional receivers that combine powerful amplification, advanced audio processing, and user-friendly features. With technologies designed to optimize sound quality and provide versatile connectivity, these models are an excellent choice for anyone looking to enhance their home audio experience. Whether for movies, music, or gaming, they deliver a premium listening experience that stands out in the competitive home theater market.
Top Page Image Contents