Pioneer VSX-AX5i-G manual Source you want. Press the Enter, Components

Fine Tuning Your System

7	7 Use the  buttons to select the
	source you want. Press the ENTER
	button.
	When you assign an i.LINK-equipped video component,
	select the input source to which you have connected the
	video signal from the component. TUNER, PHONO and
	USB inputs cannot be assigned.
	If you want to change the ports for additional i.LINK
	components
	Start again from step 6.
	•	i.LINK is displayed after unassigned device names
		such as DV-47Ai [i.LINK].
	•	When connected devices are not i.LINK-Audio compat-
		ible source components, [----] is displayed after the
		input device name such as DV-47Ai [----]. Non-compati-
		ble devices cannot be assigned to inputs.
	•	When the cables for an assigned input device become
		loose or the power is cut to the device, a * appears
		before the device name (i.e. *DV-47Ai [CD]).
	•	If you assign an i.LINK input to a certain function (for
		example DVD/LD) then any digital inputs previously
		assigned to that function will automatically be set to
		i.LINK (not assigned). This is because one function
		cannot be assigned to two different places.

8When you’re finished use the  buttons to select EXIT and press

ENTER.

You will leave the i.LINK INPUT mode.

9Use the  buttons to select EXIT and press ENTER, again. Then, use the  buttons to select EXIT and press

ENTER.

Memo:

When a number of i.LINK-equipped components are connected to your receiver, the i.LINK-equipped component you are looking for might be listed on additional display screens. When the top or bottom input is selected, pressing  button or  will display any previous or next display screen. When you press ENTER the cursor moves to EXIT.

92

En