Pioneer VSX-D914, VSX-D814 manual Using the SR+ mode with a Pioneer plasma display, R Rs

Page 51

Setting up the receiver

07

3Press TEST TONE to output the test tone.

The test tone is output in the following order (depending on the speaker setting):

L C R RS

SW LS SB

•If you don’t hear a test tone from one of your speakers, please refer to Speaker setting on page 43 and Surround back speaker setting on page 44 to make sure you have correctly specified your speaker setup.

4Press MASTER VOLUME +/– to adjust the volume to an appropriate level.

5Use LEVEL +/– to adjust the speaker levels in turn.

You should hear the test tone at the same volume from each speaker when seated in the main listening position. The channel level range is ± 10 dB.

6When you’re done, press TEST TONE to turn off the test tone.

The receiver returns to the Standard mode.

•The speaker volume can be adjusted without outputting the test tone by pressing CH SELECT and then using LEVEL +/–. However, you can only adjust the level of the speakers currently active in the mode you’re listening to. You can set separate levels for the STANDARD, STEREO and DVD 5.1 ch modes, as well as for each ADVANCED SURROUND mode.

•Since the subwoofer transmits an ultra- low frequency its sound may seem quieter than it actually is.

•Using test tones to set up your speaker system will overwrite any previous settings you had for the STANDARD or ADVANCED SURROUND modes.

Using the SR+ mode with a Pioneer plasma display

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:

•On-screen displays when making receiver settings, such as speaker setup, MCACC setup, and so on.

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the plasma display.

•Automatic volume muting on the plasma display.

See also Using this receiver with a Pioneer plasma display on page 26 for connecting up, and SR+ control for Pioneer plasma displays on page 48 for setting up the receiver.

1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable. See Using this receiver with a Pioneer plasma display on page 26 for more on connecting these components.

2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.

The front panel display shows SR+ CHECK, then the new setting is displayed (SR+ ON or SR+ OFF).

51

En

Page 50 Page 52
Image 51
Page 50 Page 52
Contents VSX-D814VSX-D914 Wash hands after handling Risk of Electric Shock Do not Open Contents Additional information Using the tunerMaking recordings Controlling the rest of your systemBefore you start Before you start Operating range of remote control unitMinute guide 02 5 minute guide ChapterIntroduction to home theater Minute guide Listening to Surround Sound Hook up your DVD playerHook up your TV Front speakers Powered Passive Subwoofer Or single Surround02 5 minute guide Connect your speakersMinute guide Play a DVD, and adjust the volume to your liking02 5 minute guide Using the Quick Setup 1ch0ch FWD MID Back Quick surround sound setup Quick surround sound setup ChapterPlace the microphone at your normal listening position 0ch 1ch Quick surround sound setupPress Enter to finish the auto surround setup 1ch 0chConnecting up Connecting up Connecting digital components CD recorder Satellite tuner CD playerDVD player Connecting DVD 5.1 channel components Connecting up Connecting audio componentsConnecting to the front panel video terminal Connecting up Connecting video componentsAM loop antenna Connecting up Connecting antennasUsing external antennas FM wire antennaConnecting up Connecting the speakers B speaker systems Connecting upHints on speaker placement Speaker terminalsOverhead view of speaker setup Connecting up Connecting additional amplifiers Connecting up AC outlet Power cord cautionOperating other Pioneer components Pioneer plasma display DVD player Pioneer plasmaControls and displays Controls and displays ChapterFront panel Controls and displays Controls and displays Display Tuned LoudnessStereo MonoControls and displays Remote control Return Mcacc SetupGuide MenuREC SetupPreset ResetMaster Volume +/- Use to set the listening volume Listening in surround sound Using the Advanced surround effectsListening to your system Listening to your system ChapterListening in stereo Listening to your systemChoosing the input signal Stereo sources Matrix encodedWith 6.1 surround Dolby Digital/DTS SourcesVSB on VSB OFF VSB Auto Start playback of the component you selected in step Using the tone controlsPlaying other sources TrebleUsing the sleep timer 90 min 60 min Off 30 minPress Sleep repeatedly to set the sleep time Setting up the receiver Setting up the receiver ChapterChoosing your receiver setup Surround back speaker distance setting Setting up the receiverSpeaker setting Surround right speaker distance settingFS-CS-SS FL-C -S Surround back speaker settingSubwoofer setting Crossover frequency setting100Hz 150Hz 200Hz Front left speaker distance settingLFE attenuator setting Center speaker distance settingSurround left speaker distance setting Surround back speaker distance settingFront right speaker distance setting Surround right speaker distance settingDigital input settings Dynamic range control settingComponent video input settings Dual mono settingSR+ control for Pioneer plasma displays Function setting for Video input Press Receiver Press Mcacc SetupManually calibrating your listening area Mcacc Press Receiver Press Standard or ADV. Surr Setting separate channel levels for listening modesR RS Using the SR+ mode with a Pioneer plasma displayUse Level +/- to adjust the speaker levels in turn When you’re done, press Test Tone to turn off the test toneSetting up the receiver Listening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationUsing the tuner Saving station presetsNaming station presets Input the name you want Listening to station presetsMaking recordings Making recordings ChapterMaking an audio or a video recording Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Use and to select Preset then press EnterUse and to select Learn then press Enter Programming signals from other remote controlsControlling the rest of your system UsePress and hold the button to be erased for two seconds Erasing one of the remote control button settingsPress the Receiver button to exit and store the operations Use and to select Erase then press EnterErasing all of the remote control presets Confirming preset codesDirect function Controlling the rest of your system Controls for TVs InputSelect Disc Controls for other componentsEnter Guide CD/MD/CD-R/VCR/LDCH+ HDDShift + DVDTroubleshooting Additional informationAdditional information Chapter Refer to Manually calibrating your listening area Mcacc on Additional informationSwitching the speaker impedance Resetting the main unitComponent video section Additional information SpecificationsAmplifier section Video SectionMiscellaneous Cleaning the unitFM Tuner Section AM Tuner SectionAdditional information Pioneer Corporation

VSX-D914, VSX-D814 specifications

The Pioneer VSX-D814 and VSX-D914 are notable home theater receivers that were designed to deliver an immersive audio and visual experience, making them staples in the world of home entertainment.

Starting with the VSX-D814, this receiver is part of Pioneer’s impressive line of multi-channel amplifiers, designed to support a wide range of audio formats. One of its standout features is the 7.1 channel surround sound capability, which brings cinema-quality audio into the home environment. With 100 watts per channel, the VSX-D814 provides ample power to fill a room with dynamic sound. The receiver supports Dolby Digital, DTS, and other digital audio processing formats, ensuring compatibility with various media sources.

The VSX-D914 steps up the game even further. It incorporates advanced decoding technologies, including Dolby Digital EX and DTS-ES, which offer enhanced surround sound experiences by providing an additional rear channel for a more immersive audio field. With 110 watts per channel, the VSX-D914 delivers an increased power performance while maintaining clarity and ensuring detailed sound reproduction.

Both models are equipped with Pioneer's proprietary technologies, such as the Advanced Surround mode, which allows users to choose from multiple surround sound options tailored to different listening environments. The receivers also feature comprehensive connectivity options, including multiple HDMI inputs, component video, and optical and coaxial digital inputs, offering versatility in connecting a variety of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another notable characteristic is the inclusion of an on-screen display that simplifies navigation through settings, configurations, and source selections. Additionally, both models boast a built-in AM/FM tuner, allowing users to enjoy radio while seamlessly integrating other auxiliary devices.

Ultimately, the Pioneer VSX-D814 and VSX-D914 represent an excellent combination of power, technology, and versatility in home theater receivers. They cater to both audiophiles seeking a rich sound experience and casual listeners looking for dependable performance. Each model, with its unique set of features, guarantees to elevate any home entertainment setup, creating an environment where movies and music can truly come to life.
Top Page Image Contents