Pioneer Comprehensive Manual for VSX-D814 and VSX-D914 - Troubleshooting & Setup Guide
Page 67

Additional information

11

Problem

Remedy

Can’t operate the remote

• Replace the batteries (refer to page 6).

control.

• Operate within 23 feet ( 7 m), 30° of the remote sensor on the front

 

 

 

panel (refer to page 7).

 

 

 

• Remove the obstacle or operate from another position.

 

 

 

• Avoid exposing the remote sensor on the front panel to direct light.

 

 

 

 

The display is dark or off.

• Press FL DIMMER on the remote control repeatedly to return to

 

 

 

the default.

 

 

 

 

 

 

 

 

 

 

 

 

•If the unit does not operate normally due to external effects such as static electricity discon- nect the power plug from the outlet and insert again to return to normal operating condi- tions.

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.

1Switch the receiver on.

2While holding down the TONE button,

press and hold the STANDBY/ON button for about three seconds.

3When you see RESET? appear in the display, press the TONE button.

OK? shows in the display.

4Press TONE once more to confirm. OK appears in the display to indicate that the receiver has been reset to the factory default settings.

Switching the speaker impedance

We recommend using speakers of 8Ω with this system, but it is possible to switch the impedance setting if you plan to use speakers with a 6Ω impedance rating.

•With the receiver in standby, press STANDBY/ON while holding down the SPEAKERS button.

Each time you do this, you switch between the impedance settings:

•SP 6 OHM – Use this setting if your speakers are rated at 6Ω.

•SP 8 OHM – Use this setting if your speakers are rated at 8Ω or more.

67

En

Page 66 Page 68
Image 67
Page 66 Page 68
Contents VSX-D814VSX-D914 Wash hands after handling Risk of Electric Shock Do not Open Contents Additional information Using the tunerMaking recordings Controlling the rest of your systemBefore you start Before you start Operating range of remote control unit02 5 minute guide Chapter Minute guideIntroduction to home theater Hook up your DVD player Minute guide Listening to Surround SoundHook up your TV Front speakers Powered Passive Subwoofer Or single Surround02 5 minute guide Connect your speakersMinute guide Play a DVD, and adjust the volume to your liking1ch 02 5 minute guide Using the Quick Setup0ch FWD MID Back Quick surround sound setup Chapter Quick surround sound setupPlace the microphone at your normal listening position 0ch 1ch Quick surround sound setupPress Enter to finish the auto surround setup 1ch 0chConnecting up CD recorder Satellite tuner CD player Connecting up Connecting digital componentsDVD player Connecting DVD 5.1 channel components Connecting up Connecting audio componentsConnecting to the front panel video terminal Connecting up Connecting video componentsAM loop antenna Connecting up Connecting antennasUsing external antennas FM wire antennaConnecting up Connecting the speakers B speaker systems Connecting upHints on speaker placement Speaker terminalsOverhead view of speaker setup Connecting up Connecting additional amplifiers Power cord caution Connecting up AC outletOperating other Pioneer components Pioneer plasma display DVD player Pioneer plasmaControls and displays Chapter Controls and displaysFront panel Controls and displays Controls and displays Display Tuned LoudnessStereo MonoControls and displays Remote control Return Mcacc SetupGuide MenuREC SetupPreset ResetMaster Volume +/- Use to set the listening volume Listening in surround sound Using the Advanced surround effectsListening to your system Listening to your system ChapterListening in stereo Listening to your systemChoosing the input signal Stereo sources Matrix encodedWith 6.1 surround Dolby Digital/DTS SourcesVSB on VSB OFF VSB Auto Start playback of the component you selected in step Using the tone controlsPlaying other sources Treble90 min 60 min Off 30 min Using the sleep timerPress Sleep repeatedly to set the sleep time Setting up the receiver Chapter Setting up the receiverChoosing your receiver setup Surround back speaker distance setting Setting up the receiverSpeaker setting Surround right speaker distance settingFS-CS-SS FL-C -S Surround back speaker settingSubwoofer setting Crossover frequency setting100Hz 150Hz 200Hz Front left speaker distance settingLFE attenuator setting Center speaker distance settingSurround left speaker distance setting Surround back speaker distance settingFront right speaker distance setting Surround right speaker distance settingDigital input settings Dynamic range control settingComponent video input settings Dual mono settingSR+ control for Pioneer plasma displays Press Receiver Press Mcacc Setup Function setting for Video inputManually calibrating your listening area Mcacc Press Receiver Press Standard or ADV. Surr Setting separate channel levels for listening modesR RS Using the SR+ mode with a Pioneer plasma displayUse Level +/- to adjust the speaker levels in turn When you’re done, press Test Tone to turn off the test toneSetting up the receiver Listening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationSaving station presets Using the tunerNaming station presets Input the name you want Listening to station presetsMaking recordings Chapter Making recordingsMaking an audio or a video recording Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Use and to select Preset then press EnterUse and to select Learn then press Enter Programming signals from other remote controlsControlling the rest of your system UsePress and hold the button to be erased for two seconds Erasing one of the remote control button settingsPress the Receiver button to exit and store the operations Use and to select Erase then press EnterConfirming preset codes Erasing all of the remote control presetsDirect function Input Controlling the rest of your system Controls for TVsSelect Disc Controls for other componentsEnter Guide CD/MD/CD-R/VCR/LDCH+ HDDShift + DVDAdditional information TroubleshootingAdditional information Chapter Refer to Manually calibrating your listening area Mcacc on Additional informationSwitching the speaker impedance Resetting the main unitComponent video section Additional information SpecificationsAmplifier section Video SectionMiscellaneous Cleaning the unitFM Tuner Section AM Tuner SectionAdditional information Pioneer Corporation

VSX-D914, VSX-D814 specifications

The Pioneer VSX-D814 and VSX-D914 are notable home theater receivers that were designed to deliver an immersive audio and visual experience, making them staples in the world of home entertainment.

Starting with the VSX-D814, this receiver is part of Pioneer’s impressive line of multi-channel amplifiers, designed to support a wide range of audio formats. One of its standout features is the 7.1 channel surround sound capability, which brings cinema-quality audio into the home environment. With 100 watts per channel, the VSX-D814 provides ample power to fill a room with dynamic sound. The receiver supports Dolby Digital, DTS, and other digital audio processing formats, ensuring compatibility with various media sources.

The VSX-D914 steps up the game even further. It incorporates advanced decoding technologies, including Dolby Digital EX and DTS-ES, which offer enhanced surround sound experiences by providing an additional rear channel for a more immersive audio field. With 110 watts per channel, the VSX-D914 delivers an increased power performance while maintaining clarity and ensuring detailed sound reproduction.

Both models are equipped with Pioneer's proprietary technologies, such as the Advanced Surround mode, which allows users to choose from multiple surround sound options tailored to different listening environments. The receivers also feature comprehensive connectivity options, including multiple HDMI inputs, component video, and optical and coaxial digital inputs, offering versatility in connecting a variety of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another notable characteristic is the inclusion of an on-screen display that simplifies navigation through settings, configurations, and source selections. Additionally, both models boast a built-in AM/FM tuner, allowing users to enjoy radio while seamlessly integrating other auxiliary devices.

Ultimately, the Pioneer VSX-D814 and VSX-D914 represent an excellent combination of power, technology, and versatility in home theater receivers. They cater to both audiophiles seeking a rich sound experience and casual listeners looking for dependable performance. Each model, with its unique set of features, guarantees to elevate any home entertainment setup, creating an environment where movies and music can truly come to life.
Top Page Image Contents