Using the tuner | 08 |
2 Press T.EDIT (TUNER EDIT).
The display shows ST. NAME, then a blinking cursor at the first character position.
3 Input the name you want.
Names can be up to four characters long.
•Use the MULTI JOG dial (front panel) or the ST +/– buttons (remote) to select characters.
•Press ENTER to confirm a character. If no character is input, a space is input.
•The name is stored when ENTER is pressed after choosing the fourth char- acter.
•To erase a station name, simply repeat steps
•Once you have named a station preset, you can press TUNER DISPLAY when listening to a station to switch the display between the name and the frequency.
Listening to station presets
You will need to have some presets stored to do this. See Saving station presets on page 54 if you haven’t done this already.
1Press TUNER to select the tuner.
2Press CLASS to select the class in which the station is stored.
Press repeatedly to cycle through classes A, B and C.
3Press ST +/– (STATION
•If the receiver is left disconnected from the AC power outlet for an extended period, the station memories will be lost and will have to be reprogrammed.
55
En