Pioneer VSX-C300-S manual LFE attenuator setting mode, Center speaker distance setting mode

Page 27

Fine Tuning Your Surround Sound

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to specify the crossover fre- quency for your small speakers (100 Hz, 150 Hz or 200 Hz).

100Hz 150Hz

200Hz

100 Hz

Sends bass frequencies below 100 Hz to the subwoofer (or “Large” speakers).

150 Hz

Sends bass frequencies below 150 Hz to the subwoofer (or “Large” speakers).

200 Hz

Sends bass frequencies below 200 Hz to the subwoofer (or “Large” speakers).

Press # to advance to the next receiver setting mode, or press @ to return to a previous receiver setting mode.

FRONT speakers distance setting mode

Set the distance from the FRONT speakers to the listening position.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to set the distance of the FRONT speakers from the main listening position (within a range from 0.3 m to 9.0 m).

Press # to advance to the next receiver setting mode, or press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is 1.8 m.

•One step equals about 0.3 m.

•If you do the ROOM SETUP settings after the settings here, those will take precedence.

English

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is “200 Hz”.

•If there are no “Small” speakers ” in SPEAKERS setting mode, crossover frequency cannot be set (−−−

appears in the display).

LFE attenuator setting mode

Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as needed to prevent the ultra-low bass tones from distorting the sound from all the active speakers.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to set the attenuation level:

0 dB 10 dB

 

 

LFE OFF

 

 

 

 

 

0 dB

: no attenuation

10 dB

: LFE volume is reduced

LFE OFF

: LFE channel is off.

Press # to advance to the next receiver setting mode, or press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is “0 dB”.

CENTER speaker distance setting mode

Set the distance from the CENTER speakers to the listening position.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to set the distance of the CEN-

TER speaker from the main listening position (within a range from 0.3 m to 9.0 m).

Press # to advance to the next receiver setting mode, or press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is 1.5 m.

•One step equals about 0.3 m.

•When “C _” is selected in SPEAKERS setting mode, the Center distance cannot be set.

•If you do the ROOM SETUP settings after making the settings here, those will take precedence.

27

En

Page 26 Page 28
Image 27
Page 26 Page 28
Contents VSX-C300 VSX-C300-S Risk of Electric Shock Do not Open Operating Environment H045 EnFeatures Contents Source Material Quick Start GuideHome Theater The Basics Your Home SystemHook up your DVD player, speakers, subwoofer and TV No Frills SetupDVD Player DV-444, etc Video cord Sold separatelyAutomatic Switching between Analog & Digital Signals Advanced/Customized SettingsIntroductory Information Checking the Supplied AccessoriesInstalling the Receiver When Making Cable ConnectionsOperating Range Remote Control Unit Maintenance of External SurfacesLoading the Batteries Audio/Video Cords Connecting Your EquipmentConnecting a DVD Player & a TV Why you need an analog connection as well as a digital oneConnecting a Digital Tuner/Set Top Box Connecting a TV with an Internal Digital TunerConnecting Your Equipment Front Connecting Video ComponentsSpeaker terminals Connecting SpeakersHints on Speaker Placement Overhead view of speaker set upView of speaker set up Using External Antennas Connecting AntennasPlugging in the Receiver Operating other Pioneer Components with this Unit’s SensorFront Panel Displays & ControlsDisplays & Controls Rear PanelRemote Control Receiver controlsTV controls Displays & Controls Playback controls Channel listening mode buttons seeChecking the Settings on Your DVD or other Player Basic PlaybackChecking the soundtrack on your disc Basic Playback Playing a SourceRoom Setup Fine Tuning Your Surround SoundPersonalizing Your Surround Sound Fine Tuning Your Surround SoundPress @ or # to select the mode you want to set Press % or fi to select the setting you wantSubwoofer ON/Plus/OFF setting mode Crossover frequency setting modePress Enter if you want to exit the setting mode No attenuation LFE attenuator setting modeCenter speaker distance setting mode 10 dB LFE volume is reducedDynamic range control setting mode Dual mono settingInput Attenuator setting Press Test Tone to turn off the test tone Sound Modes Channel Listening modes for two channel outputsMultichannel Listening modes for multichannel outputs Selecting a Listening Mode Press the button for the listening mode you wantPress Receiver Selecting a Tone Effect Midnight Listening ModeTone Effects Sound ModesTune to a station using the Tune + or Tune Buttons Using the TunerMPX mode RF ATT modeTuning Directly to a Station Using the TunerMemorizing Stations Enter up to three more characters in the same way Naming Memorized StationsRecalling Memorized Stations Press 3 to input the first of the four charac- tersAn Introduction to RDS Using the RDS displayPress the Band button to select the FM band Searching for RDS ProgramsMuting the Sound Using Other FunctionsUsing the Headphones Press the Muting button on the remote controlInput Signal Displays Explained Checking your Settings Analog Input ModeCh1 Default Settings for the ReceiverUsing Other Functions Automatically sensedChanging the Remote Control Mode Switching the Operation Mode of the RemoteControlling the Rest of Your System Recalling Preset Codes To cancel the preset mode at any timeControlling the Rest of Your System Direct Selection Clearing the Preset CodesButtons Function Components CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck ControlsDisplay Cable TV/Satellite TV/Digital TV/TV ControlsManufacturer Code Preset Code ListSTB SATELLITE/CATV DAT Additional Information TroubleshootingAdditional Information Symptom Cause RemedyPress Dimmer on the remote control re Dolby Digital and Dolby Surround Techno Know HowUnderstanding DVD Packaging Digital Audio FormatsRecording Formats Headphone Surround Playback VIRTUAL/PHONES indicator lights Channel Stereo Playback Stereo indicator lightsVirtual Surround Playback VIRTUAL/PHONES indicator lights Multichannel Surround Playback Multi ch indicator lightsSpecifications TNGZW/01F00001 Printed

VSX-C300-S, VSX-C300 specifications

The Pioneer VSX-C300 and VSX-C300-S are compact, versatile audio receivers that cater to both casual listeners and home theater enthusiasts. Designed with modern technology and user-friendly features, these models deliver impressive sound quality in a sleek and stylish package.

One of the standout features of both the VSX-C300 and VSX-C300-S is their 5.1 channel surround sound capability. This allows users to enjoy a rich audio experience, whether watching movies or listening to music. The receivers support various audio formats, including Dolby Digital and DTS, ensuring comprehensive compatibility with a wide range of media.

Both models are equipped with Advanced Direct Energy HD Amplification technology, which minimizes energy waste while maximizing output quality. This technology not only reduces power consumption but also enhances audio clarity, providing a dynamic listening experience. Additionally, the receivers feature 100 watts per channel, which ensures sufficient power for driving speakers while maintaining low distortion levels.

Integrated into the VSX-C300 and VSX-C300-S is a multitude of connectivity options. These receivers include HDMI inputs, which support high-definition video and audio, along with analog inputs for legacy devices. The availability of digital optical and coaxial inputs further enhances flexibility, offering users multiple ways to connect their media sources.

The user interface is intuitive, featuring a clear display and an easy-to-navigate remote control. Both receivers also support basic networking capabilities, allowing users to access music streaming services. This feature is particularly appealing in today's digital age, where convenience and access to a vast library of music are paramount.

Pioneer places a strong emphasis on ease of use, and both receivers reflect that ethos. Automatic speaker calibration simplifies the setup process, ensuring that users achieve optimal sound quality tailored to their room's acoustics. The included MCACC (Multi-Channel Acoustic Calibration System) automatically adjusts settings to create an immersive sound environment.

In summary, the Pioneer VSX-C300 and VSX-C300-S combine stylish design with advanced audio technology. Their 5.1 channel surround sound, Advanced Direct Energy HD Amplification, multiple connectivity options, and user-friendly features make these receivers an excellent choice for anyone looking to enhance their audio experience. Whether for movie nights or enjoying music, these receivers are a solid investment for quality sound.
Top Page Image Contents