Pioneer VSX-C300-S manual Dynamic range control setting mode, Dual mono setting

Page 28

Fine Tuning Your Surround Sound

SURROUND speakers distance setting mode

Set the distance from the SURROUND speakers to the listening position.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to set the distance of the SUR-

ROUND speakers from the main listening position (within a range from 0.3 m to 9.0 m).

Press # to advance to the next receiver setting mode, and press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is 1.8 m.

•One step equals about 0.3 m.

•When “S _” is selected in SPEAKERS setting mode, the SURROUND distance cannot be set.

•If you do the ROOM SETUP settings after the settings here, those will take precedence.

Dynamic range control setting mode

Dynamic range is the difference between the loudest and softest sounds in any given signal. The dynamic range control helps you playback sounds so the quieter sounds are audible yet the louder sounds don’t get distorted. It does this by compressing the dynamic range. When watching a movie at low volume, setting this function enables low level sounds to be heard more easily but you won’t be jolted by louder sounds.

Dual mono setting

Dual mono has two different audio channels in it. You can use it to listen to soundtracks that have one language on one channel and a different language on the other. The dual mono setting can only be used when listening to discs that have dual mono software encoded in them, for example some Dolby Digital discs. As of now these are not that widely used.

The ch1 setting plays channel 1 through your center speaker. If you have selected no Center speaker in the speakers setting (or are in a 2 ch listening mode) then you will hear ch1 out of both front speakers. The ch2 setting plays channel 2 through your center speaker. If you have selected no Center speaker in the speakers setting (or are in a 2 ch listening mode) then you will hear channel 2 out of both front speakers. In the L. c1 R. c2 setting the speakers will play the soundtrack independently of each other. The left front speaker will play channel 1 and the right front speaker will play channel 2.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to cycle through the possible

DUAL MONO settings.

ch1 ch2

L. c 1 R. c 2

Press # to advance to the next receiver setting mode, and press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting of this feature is ch1.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to set the dynamic range control (OFF, MAX, or MID).

Dynamic range control is operative only when a Dolby Digital soundtracks with this feature encoded into it is being played back. For other sources use the Midnight mode (see page 32) to achieve the same effect.

Press # to advance to the next receiver setting mode, and press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is “OFF”.

•When listening at high volume, set to OFF.

•For best results at low volumes, set to “MAX” for maximum dynamic range compression.

28

Input Attenuator setting

You can set the input signal to be lowered if it is distorting. This is only possible for analog signals, digital signals can’t be attenuated.

Follow steps 1-3 on page 25 (if necessary).

Press % or fi to select input attenuator ON or OFF.

Press # to advance to the next receiver setting mode, and press @ to return to a previous receiver setting mode.

Press ENTER if you want to exit the setting mode.

MEMO:

•The default setting is OFF.

En

Page 27 Page 29
Image 28
Page 27 Page 29
Contents VSX-C300 VSX-C300-S Operating Environment H045 En Risk of Electric Shock Do not OpenFeatures Contents Quick Start Guide Home Theater The BasicsYour Home System Source MaterialNo Frills Setup Hook up your DVD player, speakers, subwoofer and TVVideo cord Sold separately DVD Player DV-444, etcAdvanced/Customized Settings Automatic Switching between Analog & Digital SignalsChecking the Supplied Accessories Installing the ReceiverWhen Making Cable Connections Introductory InformationMaintenance of External Surfaces Operating Range Remote Control UnitLoading the Batteries Connecting Your Equipment Connecting a DVD Player & a TVWhy you need an analog connection as well as a digital one Audio/Video CordsConnecting a TV with an Internal Digital Tuner Connecting a Digital Tuner/Set Top BoxConnecting Your Equipment Connecting Video Components FrontConnecting Speakers Speaker terminalsOverhead view of speaker set up Hints on Speaker PlacementView of speaker set up Connecting Antennas Using External AntennasOperating other Pioneer Components with this Unit’s Sensor Plugging in the ReceiverDisplays & Controls Front PanelRear Panel Displays & ControlsReceiver controls Remote ControlTV controls Channel listening mode buttons see Displays & Controls Playback controlsBasic Playback Checking the Settings on Your DVD or other PlayerChecking the soundtrack on your disc Playing a Source Basic PlaybackFine Tuning Your Surround Sound Room SetupFine Tuning Your Surround Sound Press @ or # to select the mode you want to setPress % or fi to select the setting you want Personalizing Your Surround SoundCrossover frequency setting mode Subwoofer ON/Plus/OFF setting modePress Enter if you want to exit the setting mode LFE attenuator setting mode Center speaker distance setting mode10 dB LFE volume is reduced No attenuationDual mono setting Dynamic range control setting modeInput Attenuator setting Press Test Tone to turn off the test tone Channel Listening modes for two channel outputs Sound ModesMultichannel Listening modes for multichannel outputs Press the button for the listening mode you want Selecting a Listening ModePress Receiver Midnight Listening Mode Tone EffectsSound Modes Selecting a Tone EffectUsing the Tuner MPX modeRF ATT mode Tune to a station using the Tune + or Tune ButtonsUsing the Tuner Tuning Directly to a StationMemorizing Stations Naming Memorized Stations Recalling Memorized StationsPress 3 to input the first of the four charac- ters Enter up to three more characters in the same wayUsing the RDS display An Introduction to RDSSearching for RDS Programs Press the Band button to select the FM bandUsing Other Functions Using the HeadphonesPress the Muting button on the remote control Muting the SoundChecking your Settings Analog Input Mode Input Signal Displays ExplainedDefault Settings for the Receiver Using Other FunctionsAutomatically sensed Ch1Switching the Operation Mode of the Remote Changing the Remote Control ModeControlling the Rest of Your System To cancel the preset mode at any time Recalling Preset CodesControlling the Rest of Your System Clearing the Preset Codes Direct SelectionCD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck Controls Buttons Function ComponentsCable TV/Satellite TV/Digital TV/TV Controls DisplayPreset Code List Manufacturer CodeSTB SATELLITE/CATV DAT Troubleshooting Additional InformationSymptom Cause Remedy Additional InformationPress Dimmer on the remote control re Techno Know How Understanding DVD PackagingDigital Audio Formats Dolby Digital and Dolby SurroundRecording Formats Channel Stereo Playback Stereo indicator lights Virtual Surround Playback VIRTUAL/PHONES indicator lightsMultichannel Surround Playback Multi ch indicator lights Headphone Surround Playback VIRTUAL/PHONES indicator lightsSpecifications TNGZW/01F00001 Printed

VSX-C300-S, VSX-C300 specifications

The Pioneer VSX-C300 and VSX-C300-S are compact, versatile audio receivers that cater to both casual listeners and home theater enthusiasts. Designed with modern technology and user-friendly features, these models deliver impressive sound quality in a sleek and stylish package.

One of the standout features of both the VSX-C300 and VSX-C300-S is their 5.1 channel surround sound capability. This allows users to enjoy a rich audio experience, whether watching movies or listening to music. The receivers support various audio formats, including Dolby Digital and DTS, ensuring comprehensive compatibility with a wide range of media.

Both models are equipped with Advanced Direct Energy HD Amplification technology, which minimizes energy waste while maximizing output quality. This technology not only reduces power consumption but also enhances audio clarity, providing a dynamic listening experience. Additionally, the receivers feature 100 watts per channel, which ensures sufficient power for driving speakers while maintaining low distortion levels.

Integrated into the VSX-C300 and VSX-C300-S is a multitude of connectivity options. These receivers include HDMI inputs, which support high-definition video and audio, along with analog inputs for legacy devices. The availability of digital optical and coaxial inputs further enhances flexibility, offering users multiple ways to connect their media sources.

The user interface is intuitive, featuring a clear display and an easy-to-navigate remote control. Both receivers also support basic networking capabilities, allowing users to access music streaming services. This feature is particularly appealing in today's digital age, where convenience and access to a vast library of music are paramount.

Pioneer places a strong emphasis on ease of use, and both receivers reflect that ethos. Automatic speaker calibration simplifies the setup process, ensuring that users achieve optimal sound quality tailored to their room's acoustics. The included MCACC (Multi-Channel Acoustic Calibration System) automatically adjusts settings to create an immersive sound environment.

In summary, the Pioneer VSX-C300 and VSX-C300-S combine stylish design with advanced audio technology. Their 5.1 channel surround sound, Advanced Direct Energy HD Amplification, multiple connectivity options, and user-friendly features make these receivers an excellent choice for anyone looking to enhance their audio experience. Whether for movie nights or enjoying music, these receivers are a solid investment for quality sound.
Top Page Image Contents