KeyFeatures | Electro-Voice RE510 instruction

RE510

Handheld Condenser

Microphone

KeyFeatures:

•5/8" diameter self biased condenser capsule offers the warmth of a larger capsule design without sacrificing off-axis performance or transient response

•Low-frequency roll-off switch enables tailoring of low-frequency response to meet application requirements

•Supercardioid polar pattern for superior feedback rejection and acoustic isolation

•Modern high-speed electronic design for extremely low distortion, and outstanding transient response

•High current differential output stage can drive long microphone cables without loss of performance

•Warm Grip handle for more comfortable feel

•Multistage pop filter eliminates breath pop noises

General Description:

The RE510 is a professional quality hand-held condenser microphone that was designed especially for vocalists. The RE510 features a 5/8" diameter capsule, advanced electronic design, and best of all, a sound that will enhance any vocal performance.

The high frequency response of the RE510 has been designed to provide just the right amount of definition and “air” without the stridency so common in other condenser vocal microphones.

The low frequency response of the RE510 in combination with the low frequency selector switch provides versatility that was designed to be truly useful. With the low frequency selector switch in the rolled off position, the low end of the RE510 is tailored to compensate for proximity effect and provides full, clean sound without muddiness. When increased low-end is desired, placing the low frequency selector switch in the flat position adds just enough warmth to be noticeable, but not overbearing.

The wide bandwidth, high SPL handling capability, and low frequency selector switch of the RE510 also make it a versatile instrument microphone for most any application.

The low frequency selector switch is securely located beneath the ball screen and can’t be changed inadvertently.

Technical Specifications:

Generation Element: Self-Biased condenser

Frequency Response: 40 Hz to 20,000 Hz (see chart)

Polar Pattern: Supercardioid (see chart)

Sensitivity, Open Circuit 3.2mV/Pascal

Voltage, 1 kHz:

Clipping Level, 1 kHz: +2 dBV

Maximum SPL, 1 kHz: 146 dB SPL (1% THD)

Self Noise: 22 dB SPL “A” weighted (0 dB=20 micropascals)

Dynamic Range 124 dB (Maximum SPL to A

Weighted Noise Level):

Signal-to-Noise Ratio: 72 dB (@ 94 dB SPL)

Output Impedance, 1 kHz: 250 ohms

Power Requirements: Phantom Supply Requirement: 24 to 48 VDC

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3

Dimensions: Length = 7.15" (182 mm)

Diameter = 2.0" (51 mm)

Shank = 1.0" (25 mm)

Accessories Included: 326 Stand Adapter (Black) Soft Zippered "Gig" Bag

Optional Accessories: 323S Stand Adapter

376 Charcoal Windscreen

379-1 Black Windscreen

379-2 Red Windscreen

Net Weight: 9.2 oz. (260 grams)