Pioneer VSX-D2011-S, VSX-D2011-G manual 111

Page 111

Techno Tidbits & Problem-solving

Symptom

Cause

Remedy

After the proper settings

•

The speakers have been incorrectly

• Check all connections. Be sure match

have been made, there still

connected (left and right connections are

the right channel on the speaker with the

seems to be something

reversed).

right channel on the speaker terminals (see

wrong with the sound.

 

 

page 25).

 

 

 

 

 

No audio

 

 

 

 

 

 

 

 

No sound is output when a

•

Improper connections.

• Make sure the component is connected

function is selected.

 

 

correctly (see pages 16-26).

 

•

Sound is muted.

• Press MUTING on the remote control.

 

• The volume is turned down.

•

Adjust MASTER VOLUME.

 

•

Speakers are turned off.

• Press SPEAKERS (A/B) to select the

 

 

 

speakers you connected (see page 75).

 

•

DIGITAL/ANALOG setting is incorrect.

• Select the proper signal with the SIGNAL

 

 

 

SELECT button (see page 45).

 

•

MULTI CH IN mode is on.

• Turn MULTI CH IN mode off (see page

 

 

 

53).

No sound output from the

•

The front speakers aren't connected

•

Check all connections. (see page 25).

front speakers.

properly.

 

 

 

 

 

 

 

No sound output from

•

Speaker settings are incorrect.

•

See SPEAKER SETTING on pages 40-41

surround or center speakers.

 

 

to check the speaker settings.

 

• The surround or center speakers aren't

•

Check all connections (see page 25).

 

connected properly.

 

 

 

•

The listening mode is STEREO.

• Choose a surround listening mode (see page

 

 

 

44).

No sound output from the

•

The subwoofer setting is NO.

• Change the setting to YES or PLUS (see

subwoofer.

 

 

pages 40-41).

 

•

The subwoofer output setting is too low.

• Adjust the output setting to the level you

 

 

 

want (see pages 43,97).

 

•

The bass peak level setting is too low.

• Adjust the peak level setting to the level

 

 

 

you want (see page 102).

 

• There is very little low frequency

• Change your subwoofer setting to one of

 

information in your source.

the following (see pages 40-41):

 

 

 

 

Front: SMALL Subwoofer:YES

 

 

 

 

Front:LARGE Subwoofer:PLUS

 

•

The crossover frequency is set too low.

• Raise the frequency level to match your

 

 

 

speakers' characteristics (see page 96)

 

•

There is a problem with the subwoofer.

• Check the three following points:

 

 

 

 

• Check the power.

 

 

 

 

• Check the subwoofer volume control .

 

 

 

 

• Check the subwoofer hasn't

 

 

 

automatically switched to standby mode

 

 

 

(check the subwoofer manual)

 

• The subwoofer isn't connected properly.

• Check all connections (see page 25).

No sound output from the

•

The SB CH MODE is set to OFF.

•

Set the SB CH MODE to ON or AUTO

surround back speakers.

 

 

(see page 54).

 

• The source is not a 6.1 channel playback

•

Set the SB CH MODE to ON or AUTO

 

source.

and choose one of the SURROUND

 

 

 

listening modes (see pages 54, 47-48).

 

• The surround back speakers aren't

•

Check all connections (see pages 25).

 

connected properly.

 

 

 

• The surround back channel is set to 1

• Connect the speaker to the surround

 

speaker setting only, and the speaker is

back left channel output (see page 25).

 

connected to the right channel output.

 

 

No sound output from one

•

The speaker system setting is NO.

• Change the speaker setting to YES (see

(set of) speaker(s).

 

 

pages 40-41).

 

• The speaker isn't connected properly.

• Check all connections (see page 25).

 

• The source has no sound output for that

• If you choose one of the SURROUND

 

channel.

listening modes, a channel may be created

 

 

 

for the speaker (see page 44).

 

•

The speaker output level is set too small.

•

Increase the speaker output level.

 

 

 

 

 

EXPERT

111

En

Page 110 Page 112
Image 111
Page 110 Page 112
Contents VSX-D2011-SVSX-D2011-G Installing the Receiver TWO Voltage Selector Switches multi-voltage model only Operating EnvironmentFor European model Table of Contents Table of Contents Remote Control of Other Components104 Features Before You Start Checking the Supplied AccessoriesPreparing the Remote Control Remote Control Battery IndicatorOpening the Front Panel Switching video system between PAL and Ntsc if necessaryHome Theater The Basics Easy Setup Guide Part1Easy Setup Guide Part1 Hooking Up Your DVD Player & TVDigital Connections Speaker impedance setting of the receiver see Speaker ConnectionsSpeaker terminals Assigning the Digital Inputs Setting up the Main UnitDefault setting for the DIGITAL-2 jack is CD-R Receiver exits the setup processHook up the microphone to Easy Setup Guide Part2Setup MIC jack on the Front Panel Switch on the receiver and your TVEasy Setup Guide Part2 Check the speaker settings on the OSDPlaying a DVD with Surround Sound Play a DVD then adjust the Master VolumeVideo Component video Connecting Your EquipmentConnecting your TV Component Video Input Default SettingsNot a PCM-only output Connecting Video ComponentsConnecting a DVD player Connecting Your EquipmentConnecting a Video Component to the Front Panel Connecting VCRs or DVRsSatellite tuner Connecting Satellite TV SAT ComponentsConnect red plugs to Connecting Analog Audio ComponentsAudio cords TurntableComponents equipped with CD player Connecting Digital Audio ComponentsSatellite tuner CD recorderDigital Input Default Settings Coaxial cords/Optical cablesCoaxial cord To improve FM reception Connecting the Radio AntennasUsing outdoor antennas FM wire antenna AM loop antennaConnecting Speakers STANDBY/ON Speakers Speaker impedancePlacing Your Speakers AC Power CordAC Outlet switched 100 W max European model only Speaker placementMulti JOG dial Listening mode buttons see OFF -ON buttonDisplays & Controls Front PanelMaster Volume dial Standby indicatorSB CH Mode button see pages Display See Mcacc indicator see pages 13-15Remote Control +/- buttons see System Setup buttonCommand button for other components see pages Listening mode buttons see page 46@ Receiver button Volume +/- buttonsRemote Setup button Multi Operation buttonDisplay Back Panel Voltage Selector multi-voltage model only AC Outlet European model only switched, 100 W maxMulti-voltage Model only European model onlyEnter Setting Up for Surround SoundSurrback System Surround Back System Quick setup NORMAL. Press the Enter button Normal setupThrough the Normal setup menus When you have the setting you wantSurround default setting is Small Speaker SettingFront default setting is Small Center default setting is SmallSpeakers. Press Enter Use the 5∞ buttons to select Speaker system settingIf it isn’t use the 5∞ buttons to select It. Press the Enter buttonChannel Level should be selected. If Manual manual test tone modeAuto automatic test tone mode Channel Level channel balanceChannel Delay Basic Operation Turn on the power of the playback componentChoose a Listening Mode one Two ways Standby indicatorPress Receiver Switching ANALOG/DIGITAL Signal InputPress the Signal SEL Signal Select the input signal correspondingStereo modes Listening ModesTHX Cinema 2PL II Movie 2PRO Logic II Movie Movie modes Surround mode2PL II Music 2PRO Logic II Music Music modes Surround modeYou want. They appear Adjusting the Effect of a Listening ModeRepeatedly and select the setting Press the EFFECT/CH SEL buttonPress the Acoustic EQ button Press Receiver Press the DNR button on the remote ControlListening with Acoustic Calibration EQ Reducing Noise During Playback Digital NR FunctionPress Receiver Press the Loudness button on Remote control Listening in Loudness ModeAdjusting Bass and Treble Tone Control Press the BASS/TREBLE button repeatedly to select Bass orTreble Press the Multi CH Input button on Listening in HI-BIT/SAMPLING modeRemote control or the Multi CH DVD-Audio/MULTI Channel in PlaybackVirtual Surround Back Mode SB CH Mode buttonSB CH Mode Press the SB CH Mode button onDual Mono setting and playback Using HeadphonesPhones jack Video Select Adjusting the Brightness of the Display DimmerAutomatic and Manual Tuning Using the TunerPress the Band button to select Band FM or AM Channel Step Setting multi-voltage model onlyDirect Access Tuning To Change Channel StepsMemorizing Frequently Used Stations To select the class Press the Tuner button on the remote controlPress Enter when you have got Characters you want to enter Naming Memorized StationsPress the Station -/+ buttons repeatedly Recalling Memorized StationsUse the number buttons to select Channel you desire To step through each channel in orderLeisure interests and hobbies Using the RDS displayAn introduction to RDS European model only NewsUse the Band button to select the FM band Press the Search Mode buttonSearching for RDS programs European model only Tune into an FM stationTune into an EON FM station Using EON European model onlyPress the EON Mode button to select the mode you want FM bandPress and hold EON Mode front Panel for about two secondsErase PI will be displayed Press the Remote Setup button for Three seconds Remote Control of Other ComponentsSetting Up the Remote Control to Control Other Components Recalling Settings Stored in the Remote ControlProceed as above. The only practical difference in this Press ENTER. The preset code has been EnteredSelect Exit and press Enter Complete will appear in the displaySelect Function blinks on the remote control Use the 5∞ buttons to select Learning and press EnterFor example DVD/LD Select KEY flashes in the display When youre done use the 5∞ Buttons to select Exit You will return to the Remote Setup menuStart again to program other components in this manner CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck operations Using Remote Control with Other ComponentsButtons Function Components Cable TV/Satellite TV/TVoperationsUse the 5∞ buttons to select on Setting up the Direct FunctionUse the 5∞ buttons to select Dirctfnc and press Enter OFF, or Exit and press EnterPlayback the source to be recorded Using Other FunctionsRecording from Audio/Video Components Functions that can be recordedBi-amping the front speakers Front BI-AMP Second Zone Speaker System B/FRONT BI-AMP SetupSelect Front BI-AMP in the Surrback System setup see Stereo playback in another room Second ZonePlease use speakers with a nominal impedance rated 8 Ω-16 Ω When using headphones the speakers are switched offSpeaker Button Surround Back PRE OUT terminals may changeTerminal Setting up and Using the USB Audio ConnectionCheck to see if the drivers are Correctly installed Connect your PC to the USBNecessary Change the PC audio setting ifSwitch on the receiver Remote control or the MultiConnecting Additional Amplifiers Pioneer SR System Operating other Pioneer components Multi Operations Press the Multi Operation Button When done select Exit and pressSelect Exit and press Enter again Performing Multi OperationsUse the 5∞ buttons to select SYS OFF and press Enter Press the Remote Setup button for More than three secondsTo setup a command select Change and press Enter Up the Remote Control to Control Other Components, pagesPress the System OFF button Using System OFFRename Editing Remote Control Display NamesPress the Remote Setup for more Than three seconds Use the 5∞ buttons to select Funcname and press EnterFor example Name-changing screen appears in the display Editing Button Names KEY LabelUse the 5∞ buttons to select KEY Label and press Enter Press the buttons whose name you Want to changeAdjusting the Light on the Remote Control You will exit the Remote Setup menu and return toNormal operation Clearing Remote Control Settings You Have Input Resetting the Main Unit Other System Settings Fine Tuning Your SystemUse the 5∞ buttons to select Exit Press ENTER, again THX Cinema SetupSelect THX Cinema SETUP. Press Your TV, use the 5∞ buttons toThis exits the DIGITAL-IN Select mode DIGITAL-IN Select should beSelected, if not use the 5∞ buttons Choose between DVD/LD, TV/SAT, VCR1 and VCR2 You will leave the COMPONENT-IN Select modeAssigning the Component Video Inputs Use the 5∞ buttons to select COMPONENT-IN Select then pressEnter button to enter one Numbers and symbols. UseUse the Multi JOG to cycle Cursor through the lettersPHONO/LINE Setup Default is PhonoUse the 5∞ buttons to select Phono or LINE. Press Enter Expert Setup Expert settings. Use the 5∞ buttonsTo navigate through the menus Buttons to select and press Enter Crossover NetworkCrossover Network should be Selected, if it isn’t use the 5∞Fine Channel Level Adjust the distance of each channel Using the 5∞ buttons Fine Channel DelayFine Channel Delay should be Use the 5∞ buttons to adjustAcoustic CAL EQ Next frequency. Press Enter and repeat Steps 4 & 5 to adjust all the frequencies100 Cursor automatically goes toTo use the Data Check feature follow the steps here That channel appears so you can check the setting101 Bass Peak Level 102Dynamic Range Control 103Dolby Digital Techno Tidbits & Problem-solvingChart Comparing Dolby Pro Logic and Dolby Pro Logic Dolby105 DTSDTS-ES 106 THX107 Schemata of Setup Screens108 Speaker Placement InformationSpeaker Placement for a Complete THX Speaker System Speaker Placement for DVD-Audio etc. Sources109 110 Troubleshooting111 112 113 114 Maintenance of External SurfacesPreset Code Brands 115Brand Nokia Oceanic Nordmende Okano Onwa 116117 Specifications European model118 Specifications multi-voltage modelDimensions 119Furnished Parts TNGZF/02F00001 Printed

VSX-D2011-S, VSX-D2011-G specifications

The Pioneer VSX-D2011-G and VSX-D2011-S are impressive home theater receivers that embody Pioneer’s commitment to delivering high-quality audio and video performance. Both models are tailored for home entertainment enthusiasts who seek an immersive audiovisual experience without compromising on functionality or user-friendliness.

One of the most notable features of the VSX-D2011 series is its advanced audio processing capabilities. With Dolby Digital and DTS support, these receivers are built to handle surround sound formats with precision, allowing users to experience cinematic audio from the comfort of their own homes. The inclusion of multi-channel audio decoding ensures that every sound is delivered with clarity, making movie nights and music listening vibrant and engaging.

Equipped with a powerful amplifier, the VSX-D2011 models offer robust power output, which is crucial for driving larger speakers effectively. This ensures that even at high volumes, the audio remains clear without distortion, providing a listening experience that’s rich and full. The receivers also feature various speaker configuration options, making them versatile for any home theater setup.

In terms of connectivity, the VSX-D2011 boasts an array of inputs and outputs, including multiple HDMI ports, optical and coaxial digital inputs, and traditional analog connections. This variety allows users to connect multiple source devices such as Blu-ray players, gaming consoles, and streaming devices easily. The inclusion of HDMI support also ensures compatibility with high-definition video formats, which is essential for today’s modern home entertainment systems.

Another significant characteristic of the VSX-D2011 series is its user-friendly interface. Pioneer's intuitive on-screen menus and remote control make it easy to navigate through settings and preferences. This simplicity is beneficial for users who may not be technically inclined but still desire a sophisticated home theater experience.

Additionally, the receivers are designed with comprehensive audio calibration systems, such as MCACC, which automatically adjusts the sound settings based on the room’s acoustics. This feature ensures optimal sound quality, providing a tailored listening experience that can accommodate different environments.

In summary, the Pioneer VSX-D2011-G and VSX-D2011-S are robust home theater receivers that combine cutting-edge sound technology with ease of use. Their advanced audio processing, powerful amplification, extensive connectivity options, and user-friendly design make them ideal choices for both audiophiles and casual listeners looking to elevate their home entertainment experience. Whether watching movies, enjoying music, or gaming, these receivers deliver exceptional performance that captures every detail and nuance.
Top Page Image Contents