Pioneer VSX-D2011-S, VSX-D2011-G manual Easy Setup Guide Part2, Hook up the microphone to

Page 13

Easy Setup Guide Part2

1AUTO SURROUND SOUND SETUP

If setting up your surround sound speakers seems like it's going to be an involved task you only need to use this quick, automatic method, known as the MCACC system, to achieve good surround sound. You'll need to hook up the microphone so that the receiver can hear and judge the distance, size, sound character and sound pressure level of the speakers and thus know what settings to make.

First turn the volume down, then plug the microphone into the SETUP MIC jack on the front panel of the receiver and put the microphone into its stand. If you have a tripod you can affix the mic stand to it. Follow the step-by-step guide to setting up your surround sound below. This will customize the surround sound for your listening environment. If you want to personalize your surround sound setups by making the settings manually go to "Setting up for Surround Sound" (starting on page 36) and "Expert setup" (starting on page 95). Make sure all the components you need, especially speakers, have been properly connected before you do the steps described here. Use the arrow buttons (5∞) and the ENTER button on the remote control to navigate the on-screen display (OSD) on your TV. Conversely, you can use the MULTI JOG dial and ENTER button, and look at the display, on the Front Panel.

1

PHONES

TONE CONTROL

SETUP

STATION TUNING

MULTI JOG/ENTER

 

1

Hook up the microphone to the

 

MULTI JOG CONTROL SIGNAL HI-BIT

SB CH

BAND CLASS

TUNER CHARACTER/ EON

 

 

 

SET UP

RETURN SELECT HI-SAMPLING

MODE

SELECT

EDIT

SEARCH MODE

 

SETUP MIC jack on the Front Panel.

 

 

SPEAKERS TONE BASS/TREBLE

 

MIC

 

S-VIDEOVIDEO INPUT

L AUDIO R

 

 

 

 

 

 

DIGITAL IN

VIDEO

 

 

 

EASY SETUP GUIDE

microphone microphone stand

Center Speaker

Front Speaker (R)

 

Surround Speaker (R)

Subwoofer

Front Speaker (L)

2Place the microphone at your normal listening position.

Use a table, chair or something else to put the microphone at the same height as you usually listen to your system from.

3Switch on the receiver and your TV.

Make sure your TV is set to this receiver as you will use the on-screen displays (OSDs) on your TV to follow these instructions.

Listening Position

Surround Back

Speaker (R)

Surround Speaker (L)

Surround Back Speaker (L)

SETUP

S0URCE

TV

SYSTEM RECEIVER

3

 

 

OFF

 

DVD/LD

TV/SAT

VCR1/

TV CONT

DVR

 

MULTI CONTROL

 

 

VCR2

VIDEO

CD

MULTI

 

OPERATION

 

CD-R/

MD/

TUNER

RECEIVER

5

TAPE1

TAPE2

 

DIMMER

LOUDNESS

TONE

EFFECT/CH SEL

4If you have a subwoofer turn it on.

5Press the RECEIVER button on the remote control.

6Press the SYSTEM SETUP button and use the on-screen display (OSD) that appears on your TV.

7The arrow should be pointing at SURROUND SETUP, press ENTER.

 

1

2

3

 

4

 

 

SIGNAL SEL

DNR

BASS/TREBLE

+

 

 

 

5

6

7

–

8

 

 

VIDEO SEL

HI-BIT

+10

DISC

 

6

9

0

 

ENTER

 

 

 

DIRECT ACCESS SEARCH MODE

 

SYSTEM SETUP

 

 

GUIDE

7-13

MENU

 

 

TOP MENU

TUNER EDIT

 

 

TRACK

 

ENTER

 

EXIT

 

 

 

 

 

 

AUDIO

 

 

RETURN

MPX

TEXT ON RF ATT

DISP MODE

8

SUB TITLE

 

 

+

7

System Setup

 

 

 

]

 

[

1. Surround Setup

 

 

[2. THX CINEMA Setup ]

 

[3.

Input Assign

]

 

[4.

Function Rename

]

 

[5.

PHONO/LINE Setup ]

 

[Exit

]

13

En

Page 12 Page 14
Image 13
Page 12 Page 14
Contents VSX-D2011-SVSX-D2011-G Installing the Receiver Operating Environment TWO Voltage Selector Switches multi-voltage model onlyFor European model Table of Contents Remote Control of Other Components Table of Contents104 Features Preparing the Remote Control Checking the Supplied AccessoriesRemote Control Battery Indicator Before You StartOpening the Front Panel Switching video system between PAL and Ntsc if necessaryHome Theater The Basics Easy Setup Guide Part1Hooking Up Your DVD Player & TV Easy Setup Guide Part1Digital Connections Speaker Connections Speaker impedance setting of the receiver seeSpeaker terminals Default setting for the DIGITAL-2 jack is CD-R Setting up the Main UnitReceiver exits the setup process Assigning the Digital InputsSetup MIC jack on the Front Panel Easy Setup Guide Part2Switch on the receiver and your TV Hook up the microphone toEasy Setup Guide Part2 Check the speaker settings on the OSDPlaying a DVD with Surround Sound Play a DVD then adjust the Master VolumeConnecting your TV Connecting Your EquipmentComponent Video Input Default Settings Video Component videoConnecting a DVD player Connecting Video ComponentsConnecting Your Equipment Not a PCM-only outputConnecting a Video Component to the Front Panel Connecting VCRs or DVRsSatellite tuner Connecting Satellite TV SAT ComponentsAudio cords Connecting Analog Audio ComponentsTurntable Connect red plugs toComponents equipped with Satellite tuner Connecting Digital Audio ComponentsCD recorder CD playerCoaxial cords/Optical cables Digital Input Default SettingsCoaxial cord Using outdoor antennas Connecting the Radio AntennasFM wire antenna AM loop antenna To improve FM receptionConnecting Speakers STANDBY/ON Speakers Speaker impedanceAC Outlet switched 100 W max European model only AC Power CordSpeaker placement Placing Your SpeakersDisplays & Controls Listening mode buttons see OFF -ON buttonFront Panel Multi JOG dialSB CH Mode button see pages Standby indicatorDisplay See Mcacc indicator see pages 13-15 Master Volume dialRemote Control Command button for other components see pages System Setup buttonListening mode buttons see page 46 +/- buttons seeRemote Setup button Volume +/- buttonsMulti Operation button @ Receiver buttonDisplay Back Panel Multi-voltage Model only AC Outlet European model only switched, 100 W maxEuropean model only Voltage Selector multi-voltage model onlyEnter Setting Up for Surround SoundSurrback System Surround Back System Quick setup Through the Normal setup menus Normal setupWhen you have the setting you want NORMAL. Press the Enter buttonFront default setting is Small Speaker SettingCenter default setting is Small Surround default setting is SmallIf it isn’t use the 5∞ buttons to select Use the 5∞ buttons to select Speaker system settingIt. Press the Enter button Speakers. Press EnterAuto automatic test tone mode Manual manual test tone modeChannel Level channel balance Channel Level should be selected. IfChannel Delay Choose a Listening Mode one Two ways Turn on the power of the playback componentStandby indicator Basic OperationPress the Signal SEL Signal Switching ANALOG/DIGITAL Signal InputSelect the input signal corresponding Press ReceiverStereo modes Listening ModesTHX Cinema 2PL II Movie 2PRO Logic II Movie Movie modes Surround mode2PL II Music 2PRO Logic II Music Music modes Surround modeRepeatedly and select the setting Adjusting the Effect of a Listening ModePress the EFFECT/CH SEL button You want. They appearListening with Acoustic Calibration EQ Press Receiver Press the DNR button on the remote ControlReducing Noise During Playback Digital NR Function Press the Acoustic EQ buttonPress Receiver Press the Loudness button on Remote control Listening in Loudness ModePress the BASS/TREBLE button repeatedly to select Bass or Adjusting Bass and Treble Tone ControlTreble Remote control or the Multi CH Listening in HI-BIT/SAMPLING modeDVD-Audio/MULTI Channel in Playback Press the Multi CH Input button onSB CH Mode SB CH Mode buttonPress the SB CH Mode button on Virtual Surround Back ModeUsing Headphones Dual Mono setting and playbackPhones jack Video Select Adjusting the Brightness of the Display DimmerAutomatic and Manual Tuning Using the TunerDirect Access Tuning Channel Step Setting multi-voltage model onlyTo Change Channel Steps Press the Band button to select Band FM or AMMemorizing Frequently Used Stations Press Enter when you have got Characters you want to enter Press the Tuner button on the remote controlNaming Memorized Stations To select the classUse the number buttons to select Channel you desire Recalling Memorized StationsTo step through each channel in order Press the Station -/+ buttons repeatedlyAn introduction to RDS European model only Using the RDS displayNews Leisure interests and hobbiesSearching for RDS programs European model only Press the Search Mode buttonTune into an FM station Use the Band button to select the FM bandPress the EON Mode button to select the mode you want Using EON European model onlyFM band Tune into an EON FM stationPanel for about two seconds Press and hold EON Mode frontErase PI will be displayed Setting Up the Remote Control to Control Other Components Remote Control of Other ComponentsRecalling Settings Stored in the Remote Control Press the Remote Setup button for Three secondsSelect Exit and press Enter Press ENTER. The preset code has been EnteredComplete will appear in the display Proceed as above. The only practical difference in thisUse the 5∞ buttons to select Learning and press Enter Select Function blinks on the remote controlFor example DVD/LD Select KEY flashes in the display You will return to the Remote Setup menu When youre done use the 5∞ Buttons to select ExitStart again to program other components in this manner CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck operations Using Remote Control with Other ComponentsButtons Function Components Cable TV/Satellite TV/TVoperationsUse the 5∞ buttons to select Dirctfnc and press Enter Setting up the Direct FunctionOFF, or Exit and press Enter Use the 5∞ buttons to select onRecording from Audio/Video Components Using Other FunctionsFunctions that can be recorded Playback the source to be recordedSelect Front BI-AMP in the Surrback System setup see Second Zone Speaker System B/FRONT BI-AMP SetupStereo playback in another room Second Zone Bi-amping the front speakers Front BI-AMPSpeaker Button When using headphones the speakers are switched offSurround Back PRE OUT terminals may change Please use speakers with a nominal impedance rated 8 Ω-16 ΩCheck to see if the drivers are Correctly installed Setting up and Using the USB Audio ConnectionConnect your PC to the USB TerminalSwitch on the receiver Change the PC audio setting ifRemote control or the Multi NecessaryConnecting Additional Amplifiers Pioneer SR System Operating other Pioneer components Multi Operations Select Exit and press Enter again When done select Exit and pressPerforming Multi Operations Press the Multi Operation ButtonTo setup a command select Change and press Enter Press the Remote Setup button for More than three secondsUp the Remote Control to Control Other Components, pages Use the 5∞ buttons to select SYS OFF and press EnterPress the System OFF button Using System OFFPress the Remote Setup for more Than three seconds Editing Remote Control Display NamesUse the 5∞ buttons to select Funcname and press Enter RenameUse the 5∞ buttons to select KEY Label and press Enter Editing Button Names KEY LabelPress the buttons whose name you Want to change For example Name-changing screen appears in the displayYou will exit the Remote Setup menu and return to Adjusting the Light on the Remote ControlNormal operation Clearing Remote Control Settings You Have Input Resetting the Main Unit Other System Settings Fine Tuning Your SystemSelect THX Cinema SETUP. Press THX Cinema SetupYour TV, use the 5∞ buttons to Use the 5∞ buttons to select Exit Press ENTER, againDIGITAL-IN Select should be This exits the DIGITAL-IN Select modeSelected, if not use the 5∞ buttons Assigning the Component Video Inputs You will leave the COMPONENT-IN Select modeUse the 5∞ buttons to select COMPONENT-IN Select then press Choose between DVD/LD, TV/SAT, VCR1 and VCR2Use the Multi JOG to cycle Numbers and symbols. UseCursor through the letters Enter button to enter oneDefault is Phono PHONO/LINE SetupUse the 5∞ buttons to select Phono or LINE. Press Enter Expert settings. Use the 5∞ buttons Expert SetupTo navigate through the menus Crossover Network should be Crossover NetworkSelected, if it isn’t use the 5∞ Buttons to select and press EnterFine Channel Level Fine Channel Delay should be Fine Channel DelayUse the 5∞ buttons to adjust Adjust the distance of each channel Using the 5∞ buttonsAcoustic CAL EQ 100 Steps 4 & 5 to adjust all the frequenciesCursor automatically goes to Next frequency. Press Enter and repeatThat channel appears so you can check the setting To use the Data Check feature follow the steps here101 Bass Peak Level 102Dynamic Range Control 103Chart Comparing Dolby Pro Logic and Dolby Pro Logic Techno Tidbits & Problem-solvingDolby Dolby DigitalDTS 105DTS-ES 106 THX107 Schemata of Setup Screens108 Speaker Placement InformationSpeaker Placement for DVD-Audio etc. Sources Speaker Placement for a Complete THX Speaker System109 110 Troubleshooting111 112 113 114 Maintenance of External Surfaces115 Preset Code BrandsBrand Nokia Oceanic Nordmende Okano Onwa 116117 Specifications European model118 Specifications multi-voltage model119 DimensionsFurnished Parts TNGZF/02F00001 Printed

VSX-D2011-S, VSX-D2011-G specifications

The Pioneer VSX-D2011-G and VSX-D2011-S are impressive home theater receivers that embody Pioneer’s commitment to delivering high-quality audio and video performance. Both models are tailored for home entertainment enthusiasts who seek an immersive audiovisual experience without compromising on functionality or user-friendliness.

One of the most notable features of the VSX-D2011 series is its advanced audio processing capabilities. With Dolby Digital and DTS support, these receivers are built to handle surround sound formats with precision, allowing users to experience cinematic audio from the comfort of their own homes. The inclusion of multi-channel audio decoding ensures that every sound is delivered with clarity, making movie nights and music listening vibrant and engaging.

Equipped with a powerful amplifier, the VSX-D2011 models offer robust power output, which is crucial for driving larger speakers effectively. This ensures that even at high volumes, the audio remains clear without distortion, providing a listening experience that’s rich and full. The receivers also feature various speaker configuration options, making them versatile for any home theater setup.

In terms of connectivity, the VSX-D2011 boasts an array of inputs and outputs, including multiple HDMI ports, optical and coaxial digital inputs, and traditional analog connections. This variety allows users to connect multiple source devices such as Blu-ray players, gaming consoles, and streaming devices easily. The inclusion of HDMI support also ensures compatibility with high-definition video formats, which is essential for today’s modern home entertainment systems.

Another significant characteristic of the VSX-D2011 series is its user-friendly interface. Pioneer's intuitive on-screen menus and remote control make it easy to navigate through settings and preferences. This simplicity is beneficial for users who may not be technically inclined but still desire a sophisticated home theater experience.

Additionally, the receivers are designed with comprehensive audio calibration systems, such as MCACC, which automatically adjusts the sound settings based on the room’s acoustics. This feature ensures optimal sound quality, providing a tailored listening experience that can accommodate different environments.

In summary, the Pioneer VSX-D2011-G and VSX-D2011-S are robust home theater receivers that combine cutting-edge sound technology with ease of use. Their advanced audio processing, powerful amplification, extensive connectivity options, and user-friendly design make them ideal choices for both audiophiles and casual listeners looking to elevate their home entertainment experience. Whether watching movies, enjoying music, or gaming, these receivers deliver exceptional performance that captures every detail and nuance.
Top Page Image Contents