Pioneer VSX-D2011-G manual Remote Control of Other Components, Name of the company that makes

Page 66

Remote Control of Other Components

Setting Up the Remote Control to Control Other Components

In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV, DVD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and buttons, you only need to use one remote control. If your component(s) are listed in the remote control's memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn additional operations, you can use the learning mode to input the information from the remote controls supplied with your other components.

Recalling Settings Stored in the Remote Control

The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled and the component assigned, you can use this remote to easily operate the component.

memo • To exit from the remote control setup mode at any time, press REMOTE SETUP.

• See "Using Remote Control with Other Components" on pages 70 and 71 to operate your other components.

•The display will disappear after one minute or so if no new commands are entered. Press any button to wake up the remote and continue the process.

SETUP

 

S0URCE

TV

SYSTEM RECEIVER

 

 

 

OFF

 

3

DVD/LD

TV/SAT

VCR1/

TV CONT

DVR

MULTI CONTROL

 

 

VCR2

VIDEO

CD

MULTI

 

OPERATION

 

CD-R/

MD/

TUNER

RECEIVER

 

TAPE1

TAPE2

 

DIMMER

LOUDNESS

TONE

EFFECT/CH SEL

1Press the REMOTE SETUP button for

three seconds.

The REMOTE SETUP menu appears on the remote display.

2PRESET should be selected (if it isn't use the 5∞ buttons to select it) and press ENTER.

1 2 3 4

 

SIGNAL SEL

DNR

BASS/TREBLE

 

5

6

7

 

VIDEO SEL

HI-BIT

+10

 

9

0

 

 

SYSTEM SETUP

 

DIRECT ACCESS

2,

 

 

MENU

 

 

TUNER EDIT

 

 

 

ENTER

AUDIO

 

 

4-5

MPX

TEXT ON

RF ATT

8

TUNING –

BAND

1 3

+

8

–DISC

ENTER

SEARCH MODE

GUIDE

TOP MENU

TRACK

EXIT

RETURN

DISP MODE

SUB TITLE

TUNING +

¡

SELECT FUNCTION blinks in the display.

STATION –

TEXT OFF

CLASS

STATION +

4

7

 

¢

CHANNEL–

 

 

CHANNEL+

 

TV INPUT

INPUT

 

 

TV CONTROL

 

 

TV VOL

 

MIDNIGHT

VOLUME

3Press the MULTI CONTROL button (for example, DVD/LD) you want to set.

4Use the 5∞ buttons to select the component you want to set up. Press ENTER.

TV CH

 

 

MULTI CH

 

 

MAKER appears in the remote control display.

 

 

INPUT

 

 

 

MOVIE

MUSIC

ACOUSTIC

MUTE

 

 

EQ

 

 

MODE

 

REMOTE

 

5 Use the 5∞ buttons to select the

 

 

SURROUND

1

 

 

 

SETUP

name of the company that makes

STEREO/

ENTER

SB CH

Î

DIRECT

MODE

 

 

 

memo

your component. (see pages 115- 116)

The company names appear in the remote control display. If there is more than one component type for that company that makes your component then –1, –2, etc., will appear in the display. Choose one of the types and see if that works.

The TUNER button cannot be assigned.

66

En

Page 65 Page 67
Image 66
Page 65 Page 67
Contents VSX-D2011-SVSX-D2011-G Installing the Receiver TWO Voltage Selector Switches multi-voltage model only Operating EnvironmentFor European model Table of Contents Table of Contents Remote Control of Other Components104 Features Remote Control Battery Indicator Checking the Supplied AccessoriesPreparing the Remote Control Before You StartSwitching video system between PAL and Ntsc if necessary Opening the Front PanelEasy Setup Guide Part1 Home Theater The BasicsEasy Setup Guide Part1 Hooking Up Your DVD Player & TVDigital Connections Speaker impedance setting of the receiver see Speaker ConnectionsSpeaker terminals Receiver exits the setup process Setting up the Main UnitDefault setting for the DIGITAL-2 jack is CD-R Assigning the Digital InputsSwitch on the receiver and your TV Easy Setup Guide Part2Setup MIC jack on the Front Panel Hook up the microphone toCheck the speaker settings on the OSD Easy Setup Guide Part2Play a DVD then adjust the Master Volume Playing a DVD with Surround SoundComponent Video Input Default Settings Connecting Your EquipmentConnecting your TV Video Component videoConnecting Your Equipment Connecting Video ComponentsConnecting a DVD player Not a PCM-only outputConnecting VCRs or DVRs Connecting a Video Component to the Front PanelConnecting Satellite TV SAT Components Satellite tunerTurntable Connecting Analog Audio ComponentsAudio cords Connect red plugs toComponents equipped with CD recorder Connecting Digital Audio ComponentsSatellite tuner CD playerDigital Input Default Settings Coaxial cords/Optical cablesCoaxial cord FM wire antenna AM loop antenna Connecting the Radio AntennasUsing outdoor antennas To improve FM receptionConnecting Speakers Speaker impedance STANDBY/ON SpeakersSpeaker placement AC Power CordAC Outlet switched 100 W max European model only Placing Your SpeakersFront Panel Listening mode buttons see OFF -ON buttonDisplays & Controls Multi JOG dialDisplay See Mcacc indicator see pages 13-15 Standby indicatorSB CH Mode button see pages Master Volume dialRemote Control Listening mode buttons see page 46 System Setup buttonCommand button for other components see pages +/- buttons seeMulti Operation button Volume +/- buttonsRemote Setup button @ Receiver buttonDisplay Back Panel European model only AC Outlet European model only switched, 100 W maxMulti-voltage Model only Voltage Selector multi-voltage model onlySetting Up for Surround Sound EnterSurrback System Surround Back System Quick setup When you have the setting you want Normal setupThrough the Normal setup menus NORMAL. Press the Enter buttonCenter default setting is Small Speaker SettingFront default setting is Small Surround default setting is SmallIt. Press the Enter button Use the 5∞ buttons to select Speaker system settingIf it isn’t use the 5∞ buttons to select Speakers. Press EnterChannel Level channel balance Manual manual test tone modeAuto automatic test tone mode Channel Level should be selected. IfChannel Delay Standby indicator Turn on the power of the playback componentChoose a Listening Mode one Two ways Basic OperationSelect the input signal corresponding Switching ANALOG/DIGITAL Signal InputPress the Signal SEL Signal Press ReceiverListening Modes Stereo modesMovie modes Surround mode THX Cinema 2PL II Movie 2PRO Logic II MovieMusic modes Surround mode 2PL II Music 2PRO Logic II MusicPress the EFFECT/CH SEL button Adjusting the Effect of a Listening ModeRepeatedly and select the setting You want. They appearReducing Noise During Playback Digital NR Function Press Receiver Press the DNR button on the remote ControlListening with Acoustic Calibration EQ Press the Acoustic EQ buttonListening in Loudness Mode Press Receiver Press the Loudness button on Remote controlAdjusting Bass and Treble Tone Control Press the BASS/TREBLE button repeatedly to select Bass orTreble DVD-Audio/MULTI Channel in Playback Listening in HI-BIT/SAMPLING modeRemote control or the Multi CH Press the Multi CH Input button onPress the SB CH Mode button on SB CH Mode buttonSB CH Mode Virtual Surround Back ModeDual Mono setting and playback Using HeadphonesPhones jack Adjusting the Brightness of the Display Dimmer Video SelectUsing the Tuner Automatic and Manual TuningTo Change Channel Steps Channel Step Setting multi-voltage model onlyDirect Access Tuning Press the Band button to select Band FM or AMMemorizing Frequently Used Stations Naming Memorized Stations Press the Tuner button on the remote controlPress Enter when you have got Characters you want to enter To select the classTo step through each channel in order Recalling Memorized StationsUse the number buttons to select Channel you desire Press the Station -/+ buttons repeatedlyNews Using the RDS displayAn introduction to RDS European model only Leisure interests and hobbiesTune into an FM station Press the Search Mode buttonSearching for RDS programs European model only Use the Band button to select the FM bandFM band Using EON European model onlyPress the EON Mode button to select the mode you want Tune into an EON FM stationPress and hold EON Mode front Panel for about two secondsErase PI will be displayed Recalling Settings Stored in the Remote Control Remote Control of Other ComponentsSetting Up the Remote Control to Control Other Components Press the Remote Setup button for Three secondsComplete will appear in the display Press ENTER. The preset code has been EnteredSelect Exit and press Enter Proceed as above. The only practical difference in thisSelect Function blinks on the remote control Use the 5∞ buttons to select Learning and press EnterFor example DVD/LD Select KEY flashes in the display When youre done use the 5∞ Buttons to select Exit You will return to the Remote Setup menuStart again to program other components in this manner Using Remote Control with Other Components CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck operationsCable TV/Satellite TV/TVoperations Buttons Function ComponentsOFF, or Exit and press Enter Setting up the Direct FunctionUse the 5∞ buttons to select Dirctfnc and press Enter Use the 5∞ buttons to select onFunctions that can be recorded Using Other FunctionsRecording from Audio/Video Components Playback the source to be recordedStereo playback in another room Second Zone Second Zone Speaker System B/FRONT BI-AMP SetupSelect Front BI-AMP in the Surrback System setup see Bi-amping the front speakers Front BI-AMPSurround Back PRE OUT terminals may change When using headphones the speakers are switched offSpeaker Button Please use speakers with a nominal impedance rated 8 Ω-16 ΩConnect your PC to the USB Setting up and Using the USB Audio ConnectionCheck to see if the drivers are Correctly installed TerminalRemote control or the Multi Change the PC audio setting ifSwitch on the receiver NecessaryConnecting Additional Amplifiers Pioneer SR System Operating other Pioneer components Multi Operations Performing Multi Operations When done select Exit and pressSelect Exit and press Enter again Press the Multi Operation ButtonUp the Remote Control to Control Other Components, pages Press the Remote Setup button for More than three secondsTo setup a command select Change and press Enter Use the 5∞ buttons to select SYS OFF and press EnterUsing System OFF Press the System OFF buttonUse the 5∞ buttons to select Funcname and press Enter Editing Remote Control Display NamesPress the Remote Setup for more Than three seconds RenamePress the buttons whose name you Want to change Editing Button Names KEY LabelUse the 5∞ buttons to select KEY Label and press Enter For example Name-changing screen appears in the displayAdjusting the Light on the Remote Control You will exit the Remote Setup menu and return toNormal operation Clearing Remote Control Settings You Have Input Resetting the Main Unit Fine Tuning Your System Other System SettingsYour TV, use the 5∞ buttons to THX Cinema SetupSelect THX Cinema SETUP. Press Use the 5∞ buttons to select Exit Press ENTER, againThis exits the DIGITAL-IN Select mode DIGITAL-IN Select should beSelected, if not use the 5∞ buttons Use the 5∞ buttons to select COMPONENT-IN Select then press You will leave the COMPONENT-IN Select modeAssigning the Component Video Inputs Choose between DVD/LD, TV/SAT, VCR1 and VCR2Cursor through the letters Numbers and symbols. UseUse the Multi JOG to cycle Enter button to enter onePHONO/LINE Setup Default is PhonoUse the 5∞ buttons to select Phono or LINE. Press Enter Expert Setup Expert settings. Use the 5∞ buttonsTo navigate through the menus Selected, if it isn’t use the 5∞ Crossover NetworkCrossover Network should be Buttons to select and press EnterFine Channel Level Use the 5∞ buttons to adjust Fine Channel DelayFine Channel Delay should be Adjust the distance of each channel Using the 5∞ buttonsAcoustic CAL EQ Cursor automatically goes to Steps 4 & 5 to adjust all the frequencies100 Next frequency. Press Enter and repeatTo use the Data Check feature follow the steps here That channel appears so you can check the setting101 102 Bass Peak Level103 Dynamic Range ControlDolby Techno Tidbits & Problem-solvingChart Comparing Dolby Pro Logic and Dolby Pro Logic Dolby Digital105 DTSDTS-ES THX 106Schemata of Setup Screens 107Speaker Placement Information 108Speaker Placement for a Complete THX Speaker System Speaker Placement for DVD-Audio etc. Sources109 Troubleshooting 110111 112 113 Maintenance of External Surfaces 114Preset Code Brands 115Brand 116 Nokia Oceanic Nordmende Okano OnwaSpecifications European model 117Specifications multi-voltage model 118Dimensions 119Furnished Parts TNGZF/02F00001 Printed

VSX-D2011-S, VSX-D2011-G specifications

The Pioneer VSX-D2011-G and VSX-D2011-S are impressive home theater receivers that embody Pioneer’s commitment to delivering high-quality audio and video performance. Both models are tailored for home entertainment enthusiasts who seek an immersive audiovisual experience without compromising on functionality or user-friendliness.

One of the most notable features of the VSX-D2011 series is its advanced audio processing capabilities. With Dolby Digital and DTS support, these receivers are built to handle surround sound formats with precision, allowing users to experience cinematic audio from the comfort of their own homes. The inclusion of multi-channel audio decoding ensures that every sound is delivered with clarity, making movie nights and music listening vibrant and engaging.

Equipped with a powerful amplifier, the VSX-D2011 models offer robust power output, which is crucial for driving larger speakers effectively. This ensures that even at high volumes, the audio remains clear without distortion, providing a listening experience that’s rich and full. The receivers also feature various speaker configuration options, making them versatile for any home theater setup.

In terms of connectivity, the VSX-D2011 boasts an array of inputs and outputs, including multiple HDMI ports, optical and coaxial digital inputs, and traditional analog connections. This variety allows users to connect multiple source devices such as Blu-ray players, gaming consoles, and streaming devices easily. The inclusion of HDMI support also ensures compatibility with high-definition video formats, which is essential for today’s modern home entertainment systems.

Another significant characteristic of the VSX-D2011 series is its user-friendly interface. Pioneer's intuitive on-screen menus and remote control make it easy to navigate through settings and preferences. This simplicity is beneficial for users who may not be technically inclined but still desire a sophisticated home theater experience.

Additionally, the receivers are designed with comprehensive audio calibration systems, such as MCACC, which automatically adjusts the sound settings based on the room’s acoustics. This feature ensures optimal sound quality, providing a tailored listening experience that can accommodate different environments.

In summary, the Pioneer VSX-D2011-G and VSX-D2011-S are robust home theater receivers that combine cutting-edge sound technology with ease of use. Their advanced audio processing, powerful amplification, extensive connectivity options, and user-friendly design make them ideal choices for both audiophiles and casual listeners looking to elevate their home entertainment experience. Whether watching movies, enjoying music, or gaming, these receivers deliver exceptional performance that captures every detail and nuance.
Top Page Image Contents