Getting started Chapter, Particular room.1

04Getting started

Chapter 4 Getting started

Important

•RCV Press to set the remote control to receiver control mode in order to operate the receiver subwoofer (make sure that the LCD displays the RECEIVER screen, as shown below).

1Connect the microphone to the MCACC SETUP MIC jack on back of the display unit.

2Place the microphone at your normal listening position.

Place it about ear height, and make sure it is level by using a table or chair.

RECEIVER
SURR	ADV	F.S.
	SURR	SURR

Using the Auto MCACC setup for optimal surround sound

The Multichannel Acoustic Calibration (MCACC) system measures the acoustic characteristics of your listening area, taking into account ambient noise, and testing for channel delay and channel level. After you have set up the microphone provided, the system uses the information from a series of test tones to measure standing wave and reverb, optimizing the speaker settings and equalization (MCACC Effect) for your

particular room.1

Important

•The test tones used for Auto MCACC setup are loud; however, do not turn the volume down during setup as this may result in a sub-optimal setup.

•Make sure the microphone and speakers are not moved during the MCACC setup.

Make sure there are no obstacles between the speakers and the microphone.

RECEIVER

3 If the receiver subwoofer is off, press 

RECEIVER to turn the power on.

4MCACC Press MCACC.

Try to be as quiet as possible after pressing MCACC. The volume increases automatically and the system outputs a series of test tones.

•To cancel Auto MCACC setup before it has finished, press MCACC. The unit will continue to use the previous settings.

•If the ambient noise level is too high, Noisy! blinks in the display for five seconds. To exit and check the noise levels2, press MCACC, or to try again, press ENTER when Retry shows in the display.

•If you see an Error MIC! or Error Speaker! message in the display, there may be a problem with your mic or the speaker connections. To try again, press ENTER3.

When the MCACC setup is complete, the volume level returns to normal, Complete4 shows in the display, and MCACC Effect is activated.5

•Be sure to disconnect the microphone from this unit upon completion of the Auto MCACC setup.

Note

1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).

2• If the room environment is not optimal for the Auto MCACC setup (too much ambient noise, echo off the walls, obstacles blocking the speak- ers from the microphone) the final settings may be incorrect. Check for household appliances (air conditioner, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary.

• Some older TVs may interfere with the operation of the mic. If this seems to be happening, switch off the TV during Auto MCACC setup.

3If this doesn’t work, press MCACC, turn off the power, and check the problem indicated by the Error message, then try the Auto MCACC setup again.

4If Complete doesn’t appear, it is likely an error occurred during the setup. Please check all connections and try again.

5See Listening with MCACC Effect on page 32 to switch on/off MCACC Effect.

SX-LX70SW specifications

The Pioneer SX-LX70SW is a high-performance home theater receiver that combines advanced technology with user-friendly features to enhance the audio experience in any living space. This model is part of Pioneer's prestigious line of receivers, designed for audiophiles and casual listeners alike, making it a solid choice for those looking to elevate their home entertainment setup.

One of the standout features of the SX-LX70SW is its powerful amplifier section, delivering robust audio performance with a total output of up to 100 watts per channel. This ensures that every sound, whether it’s dialogue in a movie or the subtle notes of a symphony, is reproduced with stunning clarity and precision. Additionally, its 7.2-channel configuration provides ample power to drive multiple speakers, allowing for an immersive surround sound experience that envelops listeners in rich audio.

The SX-LX70SW incorporates advanced audio technologies like Dolby Atmos and DTS:X, which create a three-dimensional soundstage that adds depth and realism to any content. These technologies allow for sound to move around and above the listener, making action scenes in films or live concerts feel more engaging and lifelike.

Another key characteristic of the receiver is its extensive connectivity options. It features multiple HDMI inputs for easy integration with today's digital devices, including Blu-ray players, game consoles, and streaming devices. The built-in Wi-Fi and Bluetooth capabilities enable users to stream their favorite music services directly, providing easy access to thousands of songs without the hassle of wired connections.

The receiver’s interface is designed for ease of use, featuring an intuitive on-screen display that guides users through setup and customization. Additionally, the inclusion of a smartphone app allows for remote control and adjustments, offering added convenience for users who prefer managing their audio settings from a distance.

In terms of build quality, the SX-LX70SW is designed with durability in mind, ensuring long-term reliability. With its elegant finish and sleek design, it complements modern home entertainment systems, adding aesthetic value alongside its impressive functionality.

Overall, the Pioneer SX-LX70SW stands out as a versatile, high-performance receiver that marries cutting-edge technology with user-centric features, making it an ideal choice for anyone looking to enhance their home audio setup.