Anchor Audio XTR-6000CU2 owner manual Having Trouble W/ Your Sound SYSTEM?, Contents

Page 1

HAVING TROUBLE W/ YOUR SOUND SYSTEM?

CONDITION

POSSIBLE CAUSE

No Sound (power LED = OFF)

• power switch is in OFF position

 

• blown fuse

No Sound (power LED = ON)

• no output from source

 

• input cable unplugged

 

• input volume control low or off

 

• accessory or expansion module not in option bay

Distorted Sound

• poor or improper connection on input cable

 

• input signal too strong

Excessive Hum or Noise

• input cable not shielded

 

• not using balanced microphone

HAVING TROUBLE W/ YOUR WIRELESS SYSTEM? (Wireless Models Only)

CONDITION

POSSIBLE CAUSE

No Sound (TX ON indicator lights)

• wireless volume control low or off

 

• no mic plugged into belt-pack transmitter

No Sound (TX ON indicator off)

• sound system not turned on

 

• transmitter power switch turned off

 

• low battery or no battery in transmitter

Anchor Audio Customer Service

888-444-6077

XTREME TECHNICAL SPECIFICATIONS

Xtreme

Portable Sound System

OWNER’S MANUAL

Rated Power Output

stand-alone

w/ XTR-6001 companion

Low Frequency Amp

90 watts

125 watts

High Frequency Amp

40 watts

55 watts

Max SPL@Rated Power

116 dB (speech projection = off)

 

123 dB (speech projection = on)

General

Frequency Response

80 Hz - 15 kHz (speech = off)

 

+7 dB from 2 -12 kHz (speech = on)

Bass/Treble Control

8 dB cut/boost @ 100 Hz, 8 kHz

Inputs

Line Input

1/4” phone, Hi-Z, unbalanced

Mic Input

XLR, Lo-Z +12VDC condenser mic power

Balanced Input

XLR, switchable mic/line level

 

+12VDC condenser mic power

Sensitivity For Rated Output

Unbalanced Line

-18 dBV / 125 mVrms

Balanced Mic

-58 dBV / 1.25 mVrms

Balanced Mic Input

-58 dBV / 1.25 mVrms

Balanced Line Input

-15 dBV / 175 mVrms

Outputs

Line Output (post fader)

XLR male, 600 ohm, active balanced

Speaker Output

4-pole Neutrik Speakon®jack

 

use w/ Anchor XTR-6001

AC Power Requirements

110 - 125 VAC, 50/60 Hz, 250 watts max

 

210 - 240 VAC, 50/60 Hz, 250 watts max

Dimensions (HWD)

22.5 x 13 x 10” / 57 x 33 x 26 cm

Weight

35 pounds / 16 Kg

(Specifications subject to change without notice)

CONTENTS

 

GETTING STARTED - WARRANTY INFORMATION

2

SETTING UP YOUR XTREME SOUND SYSTEM

2

FEEDBACK - CONNECTING XTREME SOUND SYSTEMS - SPEAKER STAND SETUP

3

SOUND SYSTEM ACCESSORIES

4

XTREME SOUND SYSTEM BASIC OPERATION

4/5

OPERATING THE BUILT-IN UHF WIRELESS RECEIVER

6

OPERATING THE BUILT-IN CD PLAYER

6

OPERATING THE WIRELESS MICROPHONE/TRANSMITTER

7

HAVING TROUBLE W/ YOUR SOUND SYSTEM?

8

Anchor Audio, Inc.

XTREME TECHNICAL SPECIFICATIONS

8

Portable Sound Systems • Torrance, California

100-0135-000/B- 10/06

Image 1
Contents Contents Xtreme Technical SpecificationsHaving Trouble W/ Your Sound SYSTEM? Using Your Wireless Microphones Setting UP Your Xtreme Sound SystemGetting Started Feedback Diversity Wireless by Anchor AudioOperating the BUILT-IN CD Player Basic System Operation Sound System AccessoriesXtreme Sound System Control Panel