CRS-PMIC Pendant MIC/CHARGER Features

Figure 9. CRS-PMIC Pendant Mic/Charger

CRS-PMIC PENDANT MIC/CHARGER FEATURES

The CRS-PMIC Pendant Microphone can be used as a wireless microphone itself or as an IR Transmitter when used with the Lapel or Headset Mics.

26.MIC INPUT – One, 3.5mm mini jack connects to the mini plug on either the CRS Lapel Mic or Headset Mic. When either is connected to this jack, it overrides the Pendant Microphone, so only the Lapel Mic or Headset Mic will be active.

27.CLIP – Clips the Pendant Mic on to the included lanyard or a coat or shirt pocket for use as a hands free microphone.

28.BATTERY DOOR – Removable battery door for access to the AA re-chargeable Lithium battery. A regular alkaline battery can be used if necessary, but will not last as long as the Lithium (approx. 4 hours).

NOTE: THE PENDANT IS ALSO A CHARGER. DO NOT CONNECT THE CHARGER POWER SUPPLY WHEN USING NON-RECHARGEABLE BATTERIES!

29.IR OUTPUT ARRAY – High output IR LED’s output audio as infrared pulses in an omni-directional pattern that are received by the CRS-IRS IR Sensors. The IR Sensors output electrical DC pulses to the CRS-CASEwhich converts them back to audio signals, amplifies them and outputs the audio to the Speakers.

30.MICROPHONE – The Pendant Microphone is located at the top of the Pendant.

31.ON LED – One LED illuminates green to indicate that the microphone is ON.

32.ON/OFF SWITCH – Turns the Pendant ON/OFF.

33.6V DC IN – One 3.5mm mini jack connects to the included CRS-PENCH Charger Power Supply for re-charging the Lithium battery. (Charging Time: 3 Hours).

NOTE: THE PENDANT IS ALSO A CHARGER. DO NOT CONNECT THE CHARGER POWER SUPPLY WHEN USING NON-RECHARGEABLE BATTERIES!