CRS-CASE Inside Panel Features

Figure 4. CRS-CASE Inside Panel

An external audio source such as a CD/DVD Player, computer, projector, cable, satellite, etc and standard unbalanced, low impedance wired microphones can be connected to the Inside Panel.

11.LINE IN – Two, RCA Jacks connect to the L & R line-level audio outputs on a stereo audio source. NOTE: The CRS will output BOTH channels to BOTH Speakers (mono). Use either channel for a mono source.

12.TV/DVD – One, mono ¼” phone jack (6.33mm standard plug), connects to a DVD Player or TV/Projector, using a stereo male RCA to mono male ¼” phone adaptor. (The TV/DVD Input can be adapted to any line level audio device. Connections may vary by device.)

13.COMP – One, mono ¼” phone jack, (6.33mm standard plug), connects to a Computer using a stereo male 3.5mm mini to mono ¼” male phone adaptor. (Can be adapted to any line level audio device. Connections may vary by device.)

14.DOOR LOCK SLOT – Opening in the CRS chassis secures the lock blade when door is locked.

Figure 5. CRS-CASE Top Side Panel

CRS-CASE TOP SIDE PANEL FEATURES

The IR Sensors and Speakers get connected to the Side Panel

15.SPEAKER TERMINALS – Two pair, five-way binding posts, connect to classroom speakers. (OWI Models P5278, IC5 or IC6 suggested.)

NOTE: Both speakers output the same audio signal, (mono). The CRS-101 is not a stereo audio system.

16.IR SENSOR JACKS – Three, 3.5mm mini jacks connect to the CRS-IRS IR Sensors for input of IR pulses (audio signals) from the Headset, Lapel, Pendant or Handheld Microphones. Use any two of the three inputs with the included IR Sensors.