Numark Industries CD MIX-1 manual Service Instructions

Page 3

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

CAUTION: This product utilizes a laser. Use of controls or adjustments other than those specified herein may result in hazardous radiation exposure.

SERVICE INSTRUCTIONS

1.Disconnect power cord before servicing

2.Replace critical components only with factory parts or recommended equivalents

3.For AC line powered units - Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.

CD MIX-1

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this

OPERATING MANUAL.

This unit complies with Class B computing device rules in accordance with the specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. There is no guarantee, however, that interference will not occur in a particular installation. If the unit does cause interference to any radio or television reception, try to reduce it by one or more of the following means:

a)Reposition the other unit and/or its antennae

b)Move this unit

c)Move this unit and the other unit(s) further apart

d)Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment.

This note is in accordance with Section 15.838 of the FCC Rules.

This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet.

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty card to register your CD player with us.

MODEL: __________________________

PURCHASED FROM:_________________________

SERIAL NUMBER:___________________

DATE OF PURCHASE:________________________

 

- The Leader in DJ Technology

 

©1999 Numark Industries

- 3 -

http://www.numark.com

Image 3
Contents CD MIX-1 CD MIX-1 Safety Information and Product RegistrationService Instructions Congratulations CD MIX-1Table of Contents Important Information Track Track Buttons Used to select the track to be played Description CD MIX-1 CD Player FeaturesTime Mode LCD Display FeaturesMixer Features Rear Panel Features Editing CUE Point CD MIX-1 Description of the PLAY/PAUSE and CUE OperationsMatching the Beats PER Minute BPM Mixer CD MIX-1 Before Switching OFF the Power TroubleshootingCD MIX-1 Technical Specifications OverallGeneral Return Information Limited Product Warranty