CD MIX-1
DESCRIPTION CD MIX-1 CD PLAYER FEATURES
1.OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. Tray will automatically close after 30 seconds.
2.TIME (Time Button) - Switches the time display between elapsed playing time and remaining time on the track and remaining time on the entire CD.
3.CONT/SING - Will cause just a single track to play or all tracks in order by pressing once or twice.
4.LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. These functions are explained in the next section.
5.TRACK (Track Buttons) - Used to select the track to be played.
6.Track 10 Button - This button is for quickly advancing to higher tracks on a CD.
7.PROGRAM - Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program, either hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
8.PITCH (Pitch Button) - Activates the Pitch Slider.
9.PITCH SLIDER - The pitch can be changed up to
LED is lit, then moving the sliding fader. The pitch will not be changed if the PITCH LED is off.
10.SEARCH WHEEL (OUTER RING) - 3 forward and 3 reverse speed positions for searching through songs. The more you turn the wheel in either direction the faster you search through the music.
11.PITCH BEND/JOG WHEEL (INNER RING) - The jog wheel serves 2 functions depending on the current mode.
a)The jog wheel will control a slow frame search when the CD is not playing. To set a new frame cue point, spin the wheel then press play when you have determined the proper position. Press CUE to return to the “CUE POINT”.
b)When both CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch of each disc is matched. Either player can “catch up” or “fall back” to match the other player. The jog wheel will temporarily bend the pitch of the music if the song
is already playing by rotating the wheel clockwise to speed up or counterclockwise to slow down. By changing the pitch of one disc with respect to the pitch of the other disc, the beats can be matched.
12.CUE - Pressing the CUE button during play provides a return to the position at which play was started. If PAUSE is used before CUE, that will become the cue point. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has been reset to the position at which play was started. Steady lighting of this LED indicates the ready condition.
13.START/PAUSE (Play/Pause Button) - Each press of the Play/Pause Button causes the operation to change from play to pause or from pause to play.
14.BPM/PITCH BUTTON - Switches the mode of the display between showing the BPM and the percentage change in pitch.
15.TAP BUTTON - Tap this button with the beat of the music to determine the current Beats Per Minute (BPM).
| - The Leader in DJ Technology |
|
©1999 Numark Industries | - 7 - | http://www.numark.com |