AVALON RF, INC. | Page 7 |
MX416 User’s Guide & Operating Manual |
|
2.5Mechanical
2.5.1Mounting.
Mounting can be done in one of the following methods:
a)Clamping.
Clamping (or hard mounting) is the recommended method and the only method of mounting in all fixed installations or when operating from >10V.
Clamping is also the preferred method of mounting in mobile installations where most electrical interfaces are used.
b)Velcro® to a flat surface.
The MX416 may be mounted using Velcro® if it is required to be detached frequently. However, in this case it must be operated from a 9V battery.