Avalon Acoustics MX416 manual Charging Port, RF Output/ Antenna, I/O Connector, RF Input/ Antenna

Page 5

AVALON RF, INC.

Page 3

MX416 User’s Guide & Operating Manual

 

MX416-T (Transmitter)

1.1Charging Port

The charging connector is a 4-pin size 00B LEMO connector. A separate wall mount charger is provided thereby avoiding the need for a cradle.

1.2RF Output/ Antenna

The MX416 has a 50 Ohm RF output through a MCX jack. An antenna is included for each unit.

MX416-R (Receiver)

1.3I/O Connector

This is also a 4-pin size 00B LEMO connector. It has 2 pins for power and speaker/audio output.

1.4RF Input/ Antenna

This MCX jack is an rf input connector for an antenna. A short omni whip (supplied) can be used for short distances up to a few hundred feet or a high gain omni (or directional antenna if the application permits) can be connected using a adaptor cable (optional).

Page 4 Page 6
Image 5
Page 4 Page 6
Contents REV. X0 25 June 25 MX416 Wireless Digital MicrophoneTable of Contents General Figure a MX416 Controls and Connectors Charging Port I/O ConnectorRF Output/ Antenna RF Input/ AntennaUser Interface On/Off Switch SpecificationsSetup Electrical InterfaceFigure B Battery Charger Input InterconnectingFigure C I/O Interface Mechanical Figure D MX416 Mechanical Outline Environmental Conditions Transmitter will not transmit unless it has an antenna Operating the transceiverBase model. MX416 Ordering informationOptions Recommended accessories .3.1 Antennas
Top Page Image Contents