Pioneer VSX-416-S/-K, 516-S/-K manual Controls and displays Display

Controls and displays

Display

Illustration shows the VSX-516 model

05

English

1 2 3 4 5 6

14 15 16 17

1 SIGNAL SELECT indicators

Lights to indicate the type of input signal assigned for the current component:

AUTO

Lights when AUTO signal select is on.

SB (VSX-516 model only)

Depending on the source, this lights when a signal with surround back channel encoding is detected.

DIGITAL

Lights when a digital audio signal is detected.

DTS

Lights when a source with DTS encoded audio signals is detected.

2DIGITAL

Lights when a Dolby Digital encoded signal is detected.

ANALOG

Lights when an analog signal is detected.

2

When the STANDARD mode of the receiver is on, this lights to indicate decoding of a DTS multichannel signal.

7	8	9	10	11	12	13
				EON	[ L ]		6
				RDS	[ C ]
			SP A		[ R ]
					[Rs]		0
					[SBR]
					[SBL]
					[Ls]		6

40 125 250 4K13K

18 19 20 21 22 23

3 2 DIGITAL

When the STANDARD mode of the receiver is on, this lights to indicate decoding of a Dolby Digital multichannel signal.

42 PRO LOGIC IIx (VSX-516 model) / 2 PRO LOGIC II (VSX-416 model)

When the (STANDARD) Pro Logic II mode of the receiver is on, 2 PRO LOGIC II lights to indicate Pro Logic II decoding. 2 PRO LOGIC IIx lights to indicate Pro Logic IIx decoding (see Listening in surround sound on page 25 for more on this).

5VIR.SB

Lights during Virtual surround back processing (page 28).

6 DIRECT

Lights when source direct playback is in use. Direct playback bypasses the tone controls for the most accurate reproduction of a source.

7 AUTO SURR.

Lights when the Auto Surround feature is switched on (see Auto playback on page 25).

8 ATT

Lights when ANALOG ATT is used to attenuate (reduce) the level of the analog input signal.

9 SLEEP

Lights when the receiver is in sleep mode.

Deutsch Français Italiano Nederlands Español

21

En