Mixing down tracks, Setting up | Motorola MF-P01 specification

Recording tracks

4)Adjust the recording level for track 2, in the same way as shown above (see "Setting the level").

Use the LEVEL and PAN controls for track 1 to control the track 1 sound.

Use the MASTER control to adjust the overall monitor level.

5)When you are ready, press the REW button to rewind the tape and press the RECORD button to start recording.

6)Press the STOP button to stop recording.

7)Press the REW button to rewind and press the PLAY button to start playback.

Adjust the level and pan position of the two tracks with the LEVEL and PAN controls for tracks 1 and 2.

8)If you are not satisﬁed with your recording, try again.

The MF-P01 has 4 tracks. You can record two more musical tracks (another guitar part, harmony vocals, bass, etc.) to tracks 3 and 4, in the same manner described above, while monitoring the previously recorded tracks.

Mixing down tracks

After completing recording, the next (ﬁnal) process is "mixdown". We assume that all the four tracks are recorded.

Setting up

1)Unplug the stereo headphones.

NOTE

When headphones are plugged in, the audio performance from the LINE OUT jacks is slightly degraded.

WARNING

Before making the connections below, make sure that all equipment is turned off.

2)Connect the LINE OUT jacks of the MF-P01 to the AUX IN (or TUNER IN, CD IN, TAPE IN, etc) of your ampliﬁer.

3)Connect the master recorder to the ampliﬁer appropriately (see page 6).

4)Set the ampliﬁer’s input source to the MF-P01 and the level volume appropri- ately.

NOTE

You may directly connect the MF-P01 LINE OUT jacks to the recorder’s line input jacks without using any ampliﬁer.

12 PORTASTUDIO MF-P01