Pioneer VSX-918V Listening to your system Playing other sources, Choosing the input signal

Page 36

05Listening to your system

Playing other sources

When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

1Turn on the power of the playback component.

2Turn on the power of the receiver.

3Select the source you want to playback. Use the MULTI CONTROL buttons (INPUT SELECTOR).

4Start playback of the component you selected in step 1.

Choosing the input signal

• Default setting: AUTO

You need to hook up a component to both analog and digital inputs on the rear of the receiver to select between input signals.1

1Press RECEIVER on the remote control.

2Press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component.

Each press cycles through the following:

•AUTO – The input signal is automatically selected from the HDMI (VSX-918V model only), DIGITAL and ANALOG in this order.

•HDMI (VSX-918V model only) – Selects an HDMI signal.2

•DVD 5.1ch – See Selecting the multichannel analog inputs below.

•ANALOG – Selects the analog inputs.

•DIGITAL – Selects the digital input.

VSX-918V model only: When the HDMI is selected, the ANALOG and DIGITAL indicators are off (see page 24).

Selecting the multichannel analog inputs

If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 13), you must select the analog multichannel inputs for surround sound.3

1Make sure you have set the playback source to the proper output setting.

For example, you might need to set your DVD player to output multichannel analog audio.

2Press DVD.

3Press RECEIVER on the remote control, then press SIGNAL SEL to select the multichannel analog inputs.

DVD 5.1ch shows in the display and the ANALOG indicator lights.

Selecting the front audio inputs

When playing back a component connected to the MCACC PORTABLE jack on the front panel, set the source to PORTABLE on the receiver.

1Press PORTABLE (SHIFT+iPod) on the remote control.

You can also select the source by pressing VIDEO/PORTABLE on the front panel.

2Playback the connected component.

Note

1• This receiver can only playback Dolby Digital, PCM (32 kHz to 96 kHz), DTS and WMA9 Pro digital signal formats. With other digital signal formats, set to ANALOG.

•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 12) and set the signal input to DIGITAL.

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

2When the HDMI option in Setting the AV options on page 34 is set to THRU (THROUGH), the sound will be heard through your TV, not from this receiver.

3During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and channel levels can be set.

36

En

Page 35 Page 37
Image 36
Page 35 Page 37
Contents VSX-918V VSX-818V Wash hands after handling Ventilation Caution Operating EnvironmentContents Other Settings Controlling the rest of your systemOther connections Additional informationBefore you start Before you start ChapterChecking what’s in the box Loading the batteriesMinute guide Minute guide ChapterIntroduction to home theater Listening to Surround SoundSwitch on the receiver and your TV 02 5 minute guideMinute guide Follow the instructions on-screenWait for the test tones to finish Make sure ‘OK’ is selected, then pressBetter sound using Phase Control Other problems when using the Auto Mcacc SetupPress Phase Phase Control to switch on phase correction Connecting up Connecting up ChapterMaking cable connections Connecting up Connecting a DVD player and TV ReceiverConnecting up Connecting the multichannel analog outputsAudio and Video inputs on this receiver.2 NederlandsConnecting up Connecting other audio components About the WMA9 Pro decoderConnecting an HDD/DVD recorder, VCR and other video sources Connections for the VSX-818V are the sameConnecting up Using the component video jacks Connecting using HdmiComponent 1 DVD Component 2 TV Component 3 DVR About Hdmi Connecting up Connecting to the front panel audio mini jack Connecting to the front panel video terminalAC outlet Connecting up Connecting antennas Using external antennasTo improve FM reception To improve AM receptionConnecting up Connecting the speakers Component VideoHints on speaker placement Bare wire connectionsTwist exposed wire strands together Tighten terminalSpeaker placement diagrams Switching the speaker systemControls and displays Controls and displays ChapterFront panel 14 15 16Controls and displays DisplayAnalog DTSPRO Logic VIR. SBControls and displays Remote control Master Volume + SetupLevel + AV ParameterAccess Signal SELTuner Disp ClassOperating range of remote control Listening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Advanced surround effects Press ADV Surr repeatedly to select a listening modeListening to your system Listening in stereoListening to your system Using Front Stage Surround Advance Using Stream DirectUsing the Sound Retriever Using Virtual Surround Back VSB Listening to your system Setting the AV options SettingWhat it does Options Setting What it does Options Ch1Choosing the input signal Press Portable SHIFT+iPod on the remote controlListening to your system Playing other sources Selecting the front audio inputsSystem Setup menu System Setup menu ChapterUsing the System Setup menu Manual Mcacc speaker setupSystem Setup menu Select ‘Manual MCACC’ from the System Setup menuSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu Fine Channel LevelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Select the channels you want and adjust to your likingSelect ‘OK’ to copy and confirm Might distort. If this happens, bringManual speaker setup Speaker SettingChecking your Acoustic Calibration EQ settings Select ‘Speaker Setting’ from the Manual SP Setup menu Crossover NetworkSelect ‘Crossover Network’ from the Manual SP Setup menu Select ‘Channel Level’ from the Manual SP Setup menuAdjust the level of each channel using Channel LevelSelect ‘Speaker Distance’ from the Manual SP Setup menu Adjust the distance of each speaker UsingSpeaker Distance Using the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Listening to station presetsNaming station presets Nederlands EspañolMaking recordings Making recordings ChapterMaking an audio or a video recording Setting the remote to control other components Controlling the rest of your systemControlling the rest of your system Chapter Operating other Pioneer componentsClearing all the remote control settings Use the number buttons to enter the preset codeDirect function Controlling the rest of your system Controls for TVs Buttons Function ComponentsShift + Function Components SHIFT+Controlling the rest of your system Controlling the rest of your system Preset Code List On digital STBDVD Recorder Connecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterOther connections IPod playbackFinding what you want to play Basic playback controlsUsing XM Radio Connecting your XM Radio receiverSwitching the iPod controls1 Press iPod Ctrl to switch the iPod controls.2Using XM HD Surround Saving channel presetsListening to XM Radio Selecting channels and browsing by genreUsing the XM Menu About Neural SurroundAbout XM Using Sirius Radio Connecting your Sirius Connect TunerListening to Sirius Radio Select the channel you want to memorizeOne at time with Enter to listen to the Sirius radio broadcastUsing this receiver with a Pioneer flat panel TV Using the Sirius MenuParental Lock Use Using the SR+ mode with a Pioneer flat panel TV Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsOther Settings Assigning the component video inputsAssigning the Hdmi inputs Other Settings Other Setup menu SR+ Setup for Pioneer flat panel TVsSelect ‘Other Setup’ then press Enter Select the ‘PDP Volume Control’ setting you wantTroubleshooting Problem RemedyAdditional information Additional information ChapterSymptom Remedy Additional informationConfiguration1 Important information regarding the Hdmi connectionSymptom Cause Symptom Cause ActionIPod messages XM radio messagesSirius radio messages TunerAdditional information Resetting the main unit Switching the speaker impedanceSpecifications Amplifier sectionVideo Section Component video sectionFM Tuner Section AM Tuner SectionPower cord caution Cleaning the unitWe Want You Listening For a Lifetime Limitedwarranty Pioneer Corporation

VSX-818V, VSX-918V specifications

The Pioneer VSX-918V and VSX-818V are standout receivers in the contemporary home audio landscape, delivering exceptional sound quality, versatile connectivity, and advanced features aimed at enhancing the listening experience for audiophiles and casual users alike.

Both models support a wide array of audio formats, including Dolby Digital, DTS, and others, ensuring rich, immersive sound for movies, music, and gaming. The VSX-918V is particularly notable for its higher wattage output, offering 100 watts per channel, which provides ample power for larger rooms and demanding speakers. The VSX-818V, while slightly lower in wattage at 90 watts per channel, still delivers robust performance suitable for most home theater setups.

A defining characteristic of these receivers is their multi-zone capabilities. The VSX-918V allows users to enjoy different audio sources in separate rooms, making it ideal for individuals who wish to create a whole-house audio solution. The VSX-818V also offers multi-zone functionality but is better suited for simpler applications, maintaining a balance between performance and cost.

Both receivers feature Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio output to match the listening environment. This technology analyzes speaker placement and room acoustics, delivering optimal sound performance tailored to specific room characteristics. Users benefit from a straightforward setup process with the included microphone, allowing for quick adjustments to achieve premium sound quality.

Connectivity options abound on both models, with multiple HDMI inputs supporting advanced video and audio formats, including 1080p pass-through. They also offer component and composite video inputs, optical and coaxial digital audio inputs, as well as analog audio connections. This extensive connectivity ensures compatibility with a variety of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another notable feature is the built-in PLL (Phase Locked Loop) technology for the FM tuner, which enhances radio reception quality, allowing for clearer and more stable signals. The VSX-918V and VSX-818V also provide users with customizable sound fields, including various surround sound modes, to cater to different media types and personal preferences.

For maximum usability, each receiver comes equipped with an intuitive remote control, allowing users to access functions quickly and manage their sound settings without hassle. In summary, whether choosing the power-packed VSX-918V or the versatile VSX-818V, both receivers exemplify Pioneer's commitment to delivering high-quality audio performance and user-friendly features for any home entertainment setup.
Top Page Image Contents