Pioneer VSX-918V Additional information Resetting the main unit, Switching the speaker impedance

Page 72

12Additional information

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.

1Switch the receiver into standby.

2While holding down the ADVANCED SURROUND button, press and hold the STANDBY/ON button for about three seconds.

3When you see RESET? appear in the display, press ‘ST –’.

OK? shows in the display.

4Press SOUND RETRIEVER to confirm. OK appears in the display to indicate that the receiver has been reset to the factory settings.

Switching the speaker impedance

We recommend using speakers of 8 Ω with this system, but it is possible to switch the impedance setting if you plan to use speakers with a 6 Ω impedance rating.

•With the receiver in standby, press STANDBY/ON while holding down the SPEAKERS button.

Each time you do this, you switch between the impedance settings:

•SP 6 OHM – Use this setting if your speakers are rated at 6 Ω.

•SP 8 OHM – Use this setting if your speakers are rated at 8 Ω or more.

Specifications

Amplifier section

•Continuous power output (stereo)

Front . . .95 W (20 Hz to 20 kHz, THD 0.2 %, 8 Ω)1

•Rated power output

(surround / 20 Hz to 20 kHz, THD 0.06 %, 8 Ω)

Front . . . . . . . . . . . . . . . . . . . . . .95 W per channel Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 W Surround. . . . . . . . . . . . . . . . . . .95 W per channel

•Rated power output

(surround / 1 kHz, THD 0.05 %, 8 Ω)

Front . . . . . . . . . . . . . . . . . . . . .120 W per channel Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 W Surround. . . . . . . . . . . . . . . . . .120 W per channel

Audio section

•Input (Sensitivity/Impedance)

AUX, CD, CD-R/TAPE/MD, DVD/BD,

TV/SAT, DVR/VCR . . . . . . . . . . . . . .335 mV/47 kΩ

•Frequency response

AUX, CD, CD-R/TAPE/MD, DVD/BD,

TV/SAT, DVR/VCR . . . . . 5 Hz to 100 000 Hz dB

•Output (Level/Impedance)

CD-R/TAPE/MD, DVR/VCR . . . . . . 335 mV/2.2 kΩ

•Tone control

Bass . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz) Treble . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz) Loudness . . . . . . +10 dB/+5 dB (100 Hz/10 kHz)

(at volume level –50 dB)

•Signal-to-Noise Ratio (IHF, short circuited, A network)

AUX, CD, CD-R/TAPE/MD, DVD/BD,

TV/SAT, DVR/VCR . . . . . . . . . . . . . . . . . . . . .96 dB

• Signal-to Noise Ratio [EIA, at 1 W (1 kHz)]

AUX, CD, CD-R/TAPE/MD, DVD/BD,

TV/SAT, DVR/VCR . . . . . . . . . . . . . . . . . . . . 79 dB

Note

1Continuous average power output of 95 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than 0.2 %** total harmonic distortion (front).

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers.

**Measured by Audio Spectrum Analyzer.

72

En

Page 71 Page 73
Image 72
Page 71 Page 73
Contents VSX-918V VSX-818V Wash hands after handling Ventilation Caution Operating EnvironmentContents Other Settings Controlling the rest of your systemOther connections Additional informationBefore you start Before you start ChapterChecking what’s in the box Loading the batteriesMinute guide Minute guide ChapterIntroduction to home theater Listening to Surround SoundSwitch on the receiver and your TV 02 5 minute guideMinute guide Follow the instructions on-screenWait for the test tones to finish Make sure ‘OK’ is selected, then pressBetter sound using Phase Control Other problems when using the Auto Mcacc SetupPress Phase Phase Control to switch on phase correction Connecting up Connecting up ChapterMaking cable connections Connecting up Connecting a DVD player and TV ReceiverConnecting up Connecting the multichannel analog outputsAudio and Video inputs on this receiver.2 NederlandsConnecting up Connecting other audio components About the WMA9 Pro decoderConnecting an HDD/DVD recorder, VCR and other video sources Connections for the VSX-818V are the sameConnecting up Using the component video jacks Connecting using HdmiComponent 1 DVD Component 2 TV Component 3 DVR About Hdmi Connecting up Connecting to the front panel audio mini jack Connecting to the front panel video terminalAC outlet Connecting up Connecting antennas Using external antennasTo improve FM reception To improve AM receptionConnecting up Connecting the speakers Component VideoHints on speaker placement Bare wire connectionsTwist exposed wire strands together Tighten terminalSpeaker placement diagrams Switching the speaker systemControls and displays Controls and displays ChapterFront panel 14 15 16Controls and displays DisplayAnalog DTSPRO Logic VIR. SBControls and displays Remote control Master Volume + SetupLevel + AV ParameterAccess Signal SELTuner Disp ClassOperating range of remote control Listening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Advanced surround effects Press ADV Surr repeatedly to select a listening modeListening to your system Listening in stereoListening to your system Using Front Stage Surround Advance Using Stream DirectUsing the Sound Retriever Using Virtual Surround Back VSB Listening to your system Setting the AV options SettingWhat it does Options Setting What it does Options Ch1Choosing the input signal Press Portable SHIFT+iPod on the remote controlListening to your system Playing other sources Selecting the front audio inputsSystem Setup menu System Setup menu ChapterUsing the System Setup menu Manual Mcacc speaker setupSystem Setup menu Select ‘Manual MCACC’ from the System Setup menuSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu Fine Channel LevelSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Fine Speaker DistanceSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Select the channels you want and adjust to your likingSelect ‘OK’ to copy and confirm Might distort. If this happens, bringManual speaker setup Speaker SettingChecking your Acoustic Calibration EQ settings Select ‘Speaker Setting’ from the Manual SP Setup menu Crossover NetworkSelect ‘Crossover Network’ from the Manual SP Setup menu Select ‘Channel Level’ from the Manual SP Setup menuAdjust the level of each channel using Channel LevelSelect ‘Speaker Distance’ from the Manual SP Setup menu Adjust the distance of each speaker UsingSpeaker Distance Using the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Listening to station presetsNaming station presets Nederlands EspañolMaking recordings Making recordings ChapterMaking an audio or a video recording Setting the remote to control other components Controlling the rest of your systemControlling the rest of your system Chapter Operating other Pioneer componentsClearing all the remote control settings Use the number buttons to enter the preset codeDirect function Controlling the rest of your system Controls for TVs Buttons Function ComponentsShift + Function Components SHIFT+Controlling the rest of your system Controlling the rest of your system Preset Code List On digital STBDVD Recorder Connecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterOther connections IPod playbackFinding what you want to play Basic playback controlsUsing XM Radio Connecting your XM Radio receiverSwitching the iPod controls1 Press iPod Ctrl to switch the iPod controls.2Using XM HD Surround Saving channel presetsListening to XM Radio Selecting channels and browsing by genreUsing the XM Menu About Neural SurroundAbout XM Using Sirius Radio Connecting your Sirius Connect TunerListening to Sirius Radio Select the channel you want to memorizeOne at time with Enter to listen to the Sirius radio broadcastUsing this receiver with a Pioneer flat panel TV Using the Sirius MenuParental Lock Use Using the SR+ mode with a Pioneer flat panel TV Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsOther Settings Assigning the component video inputsAssigning the Hdmi inputs Other Settings Other Setup menu SR+ Setup for Pioneer flat panel TVsSelect ‘Other Setup’ then press Enter Select the ‘PDP Volume Control’ setting you wantTroubleshooting Problem RemedyAdditional information Additional information ChapterSymptom Remedy Additional informationConfiguration1 Important information regarding the Hdmi connectionSymptom Cause Symptom Cause ActionIPod messages XM radio messagesSirius radio messages TunerAdditional information Resetting the main unit Switching the speaker impedanceSpecifications Amplifier sectionVideo Section Component video sectionFM Tuner Section AM Tuner SectionPower cord caution Cleaning the unitWe Want You Listening For a Lifetime Limitedwarranty Pioneer Corporation

VSX-818V, VSX-918V specifications

The Pioneer VSX-918V and VSX-818V are standout receivers in the contemporary home audio landscape, delivering exceptional sound quality, versatile connectivity, and advanced features aimed at enhancing the listening experience for audiophiles and casual users alike.

Both models support a wide array of audio formats, including Dolby Digital, DTS, and others, ensuring rich, immersive sound for movies, music, and gaming. The VSX-918V is particularly notable for its higher wattage output, offering 100 watts per channel, which provides ample power for larger rooms and demanding speakers. The VSX-818V, while slightly lower in wattage at 90 watts per channel, still delivers robust performance suitable for most home theater setups.

A defining characteristic of these receivers is their multi-zone capabilities. The VSX-918V allows users to enjoy different audio sources in separate rooms, making it ideal for individuals who wish to create a whole-house audio solution. The VSX-818V also offers multi-zone functionality but is better suited for simpler applications, maintaining a balance between performance and cost.

Both receivers feature Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio output to match the listening environment. This technology analyzes speaker placement and room acoustics, delivering optimal sound performance tailored to specific room characteristics. Users benefit from a straightforward setup process with the included microphone, allowing for quick adjustments to achieve premium sound quality.

Connectivity options abound on both models, with multiple HDMI inputs supporting advanced video and audio formats, including 1080p pass-through. They also offer component and composite video inputs, optical and coaxial digital audio inputs, as well as analog audio connections. This extensive connectivity ensures compatibility with a variety of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another notable feature is the built-in PLL (Phase Locked Loop) technology for the FM tuner, which enhances radio reception quality, allowing for clearer and more stable signals. The VSX-918V and VSX-818V also provide users with customizable sound fields, including various surround sound modes, to cater to different media types and personal preferences.

For maximum usability, each receiver comes equipped with an intuitive remote control, allowing users to access functions quickly and manage their sound settings without hassle. In summary, whether choosing the power-packed VSX-918V or the versatile VSX-818V, both receivers exemplify Pioneer's commitment to delivering high-quality audio performance and user-friendly features for any home entertainment setup.
Top Page Image Contents