Pioneer VSX-818V, VSX-918V operating instructions Fine Speaker Distance

Page 39

The System Setup menu

06

When it sounds like both tones are the same volume, press ENTER to confirm and continue to the next channel.

2a.Fine Channel Level

L

+

0.0dB

(Reference)

R

[

0.0dB ]

 

C

 

+1.0dB

 

LS

[

–3.0dB ]

 

RS

[ +10.0dB ]

 

SW

[

–1.5dB ]

 

:Finish

•For comparison purposes, the reference speaker will change depending on which speaker you select.

•If you want to go back and adjust a

channel, simply use

to select it.

3When you’re finished, press RETURN. You return to the Manual MCACC setup menu.

Fine Speaker Distance

• Default setting: 10.0ft (all channels)

For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some speakers so that all sounds will arrive at the listening position at the same time. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 42.

1Select ‘Fine SP Distance’ from the Manual MCACC setup menu.

The volume increases to the reference level.

2.Manual MCACC

a.Fine Ch Level b.Fine SP Distance c.EQ AUTO Setting d.EQ Data Copy e.EQ CUSTOM1 Adjust

f .EQ CUSTOM2 Adjust g.EQ Data Check

:Return

2Adjust the distance of the left channel from the listening position.

2b.Fine SP Distance

L(Reference)

10.0ft

ENTER:Next :Cancel

After pressing ENTER, test tones will be output.

3Select each channel in turn and adjust the distance as necessary.

Use to adjust the delay of the speaker you selected to match the reference speaker. The delay is measured in terms of speaker distance from 0.5 feet to 45.0 feet (0.1 m to 13 m).

2b.Fine

SP

Distance

L

 

10.0ft (Reference)

R

[

9.0ft ]

C

 

9.5ft

LS

[

6.0ft ]

RS

[

6.5ft ]

SW

[ 12.5ft ]

:Finish

Listen to the reference speaker and use it to measure the target channel. From the listening position, face the two speakers with your arms outstretched pointing at each speaker. Try to make the two tones sound as if they are arriving simultaneously at a position slightly in front of you and between your arm span.

When it sounds like the delay settings are matched up, press ENTER to confirm and continue to the next channel.

•For comparison purposes, the reference speaker will change depending on which speaker you select.

English Deutsch Français Italiano Nederlands Español

39

En

Page 38 Page 40
Image 39
Page 38 Page 40
Contents VSX-918V VSX-818V Wash hands after handling Operating Environment Ventilation CautionContents Additional information Other SettingsControlling the rest of your system Other connectionsLoading the batteries Before you startBefore you start Chapter Checking what’s in the boxListening to Surround Sound Minute guideMinute guide Chapter Introduction to home theater02 5 minute guide Switch on the receiver and your TVMake sure ‘OK’ is selected, then press Minute guideFollow the instructions on-screen Wait for the test tones to finishBetter sound using Phase Control Other problems when using the Auto Mcacc SetupPress Phase Phase Control to switch on phase correction Connecting up Connecting up ChapterMaking cable connections Receiver Connecting up Connecting a DVD player and TVNederlands Connecting upConnecting the multichannel analog outputs Audio and Video inputs on this receiver.2About the WMA9 Pro decoder Connecting up Connecting other audio componentsConnections for the VSX-818V are the same Connecting an HDD/DVD recorder, VCR and other video sourcesConnecting up Using the component video jacks Connecting using HdmiComponent 1 DVD Component 2 TV Component 3 DVR About Hdmi Connecting up Connecting to the front panel audio mini jack Connecting to the front panel video terminalAC outlet To improve AM reception Connecting up Connecting antennasUsing external antennas To improve FM receptionComponent Video Connecting up Connecting the speakersTighten terminal Hints on speaker placementBare wire connections Twist exposed wire strands togetherSwitching the speaker system Speaker placement diagrams14 15 16 Controls and displaysControls and displays Chapter Front panelDisplay Controls and displaysVIR. SB AnalogDTS PRO LogicControls and displays Remote control AV Parameter Master Volume +Setup Level +Class AccessSignal SEL Tuner DispOperating range of remote control Listening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening in stereo Using the Advanced surround effectsPress ADV Surr repeatedly to select a listening mode Listening to your systemListening to your system Using Front Stage Surround Advance Using Stream DirectUsing the Sound Retriever Using Virtual Surround Back VSB Listening to your system Setting the AV options SettingWhat it does Options Ch1 Setting What it does OptionsSelecting the front audio inputs Choosing the input signalPress Portable SHIFT+iPod on the remote control Listening to your system Playing other sourcesManual Mcacc speaker setup System Setup menuSystem Setup menu Chapter Using the System Setup menuFine Channel Level System Setup menuSelect ‘Manual MCACC’ from the System Setup menu Select ‘Fine Ch Level’ from the Manual Mcacc setup menuFine Speaker Distance Select ‘Fine SP Distance’ from the Manual Mcacc setup menuSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsAcoustic Calibration EQ Might distort. If this happens, bring Setting the Acoustic Calibration EQ manuallySelect the channels you want and adjust to your liking Select ‘OK’ to copy and confirmManual speaker setup Speaker SettingChecking your Acoustic Calibration EQ settings Crossover Network Select ‘Speaker Setting’ from the Manual SP Setup menuChannel Level Select ‘Crossover Network’ from the Manual SP Setup menuSelect ‘Channel Level’ from the Manual SP Setup menu Adjust the level of each channel usingSelect ‘Speaker Distance’ from the Manual SP Setup menu Adjust the distance of each speaker UsingSpeaker Distance Listening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationNederlands Español Using the tuner Saving station presetsListening to station presets Naming station presetsMaking recordings Making recordings ChapterMaking an audio or a video recording Operating other Pioneer components Setting the remote to control other componentsControlling the rest of your system Controlling the rest of your system ChapterClearing all the remote control settings Use the number buttons to enter the preset codeDirect function Controlling the rest of your system Controls for TVs Buttons Function ComponentsShift + SHIFT+ Function ComponentsControlling the rest of your system Controlling the rest of your system Preset Code List On digital STBDVD Recorder Other connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsBasic playback controls Other connectionsIPod playback Finding what you want to playPress iPod Ctrl to switch the iPod controls.2 Using XM RadioConnecting your XM Radio receiver Switching the iPod controls1Selecting channels and browsing by genre Using XM HD SurroundSaving channel presets Listening to XM RadioUsing the XM Menu About Neural SurroundAbout XM Connecting your Sirius Connect Tuner Using Sirius RadioEnter to listen to the Sirius radio broadcast Listening to Sirius RadioSelect the channel you want to memorize One at time withUsing this receiver with a Pioneer flat panel TV Using the Sirius MenuParental Lock Use Using the SR+ mode with a Pioneer flat panel TV Assigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuOther Settings Assigning the component video inputsAssigning the Hdmi inputs Select the ‘PDP Volume Control’ setting you want Other Settings Other Setup menuSR+ Setup for Pioneer flat panel TVs Select ‘Other Setup’ then press EnterAdditional information Chapter TroubleshootingProblem Remedy Additional informationAdditional information Symptom RemedyImportant information regarding the Hdmi connection Configuration1XM radio messages Symptom CauseSymptom Cause Action IPod messagesTuner Sirius radio messagesAmplifier section Additional information Resetting the main unitSwitching the speaker impedance SpecificationsAM Tuner Section Video SectionComponent video section FM Tuner SectionPower cord caution Cleaning the unitWe Want You Listening For a Lifetime Limitedwarranty Pioneer Corporation

VSX-818V, VSX-918V specifications

The Pioneer VSX-918V and VSX-818V are standout receivers in the contemporary home audio landscape, delivering exceptional sound quality, versatile connectivity, and advanced features aimed at enhancing the listening experience for audiophiles and casual users alike.

Both models support a wide array of audio formats, including Dolby Digital, DTS, and others, ensuring rich, immersive sound for movies, music, and gaming. The VSX-918V is particularly notable for its higher wattage output, offering 100 watts per channel, which provides ample power for larger rooms and demanding speakers. The VSX-818V, while slightly lower in wattage at 90 watts per channel, still delivers robust performance suitable for most home theater setups.

A defining characteristic of these receivers is their multi-zone capabilities. The VSX-918V allows users to enjoy different audio sources in separate rooms, making it ideal for individuals who wish to create a whole-house audio solution. The VSX-818V also offers multi-zone functionality but is better suited for simpler applications, maintaining a balance between performance and cost.

Both receivers feature Pioneer’s proprietary MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio output to match the listening environment. This technology analyzes speaker placement and room acoustics, delivering optimal sound performance tailored to specific room characteristics. Users benefit from a straightforward setup process with the included microphone, allowing for quick adjustments to achieve premium sound quality.

Connectivity options abound on both models, with multiple HDMI inputs supporting advanced video and audio formats, including 1080p pass-through. They also offer component and composite video inputs, optical and coaxial digital audio inputs, as well as analog audio connections. This extensive connectivity ensures compatibility with a variety of devices such as Blu-ray players, gaming consoles, and streaming devices.

Another notable feature is the built-in PLL (Phase Locked Loop) technology for the FM tuner, which enhances radio reception quality, allowing for clearer and more stable signals. The VSX-918V and VSX-818V also provide users with customizable sound fields, including various surround sound modes, to cater to different media types and personal preferences.

For maximum usability, each receiver comes equipped with an intuitive remote control, allowing users to access functions quickly and manage their sound settings without hassle. In summary, whether choosing the power-packed VSX-918V or the versatile VSX-818V, both receivers exemplify Pioneer's commitment to delivering high-quality audio performance and user-friendly features for any home entertainment setup.
Top Page Image Contents