B_DPL580 EN | 4/16/04 12:53 PM Page 17 |
Operating Your Receiver
Switching the unit on and off
• To switch on the receiver, press the ON/ECO button
on the main unit once, or the button on the remote control.
•Standby: when the receiver is in tuner mode, press the ON/ECO button once to enter standby mode.
On the remote control, press the button twice within 2 seconds if the receiver is not in Tuner source mode to enter standby mode.
To avoid entering standby mode when powering up
the unit, do not press the button twice within 2 seconds.
•The receiver draws a small amount of electricity when in standby mode. Unplugging the unit from the wall socket will stop the draw.
Example 1:
If you have connected a DVD player to the DVD input
(audio + video) on the receiver, press the SOURCE EN buttons on the main unit repeatedly until DVD is selected or press DVD•6CH on the remote control to receive the sounds and images transmitted by the
DVD.
Example 2:
Based on the example 1, the DVD is playing , if a VCR is connected to the VCR input (audio + video) of the receiver, press the SOURCE buttons on the main unit repeatedly until VCR is selected or press AUX 1 (VCR) on the remote control. The image and sound from the VCR source will replace the DVD.
Selection of Audio/Video source
When one of the source button is pressed, the audio and video input corresponding to the name will be activated.
The receiver acts as a switching device between all the sources that are plugged into it.
13
