B_DPL580 EN | 4/16/04 12:53 PM Page 21 |
Operating your Receiver
Storing radio stations
The receiver can store up to 40 radio stations in memory. You can enter every single radio station yourself or the receiver can store all available radio stations automatically in an ascending order.
Automatic preset storing : (FM only)
1. In Tuner mode, select the FM band by pressing TUNER on the remote control.
3.Press the SAVE button on the remote control.
"MEMORY" will flash and | EN |
a preset number will be |
|
shown on the display. |
|
4. While MEMORY is still flashing on the display,
press PR or PR on the remote control to select the desired preset memory location.
2.Press and hold the TUNER button on the remote control for 3 seconds. “MEMORY” will be displayed in red and will blink during the automatic storing process.
Radio frequencies will be scanned and radio stations will be stored automatically. When all available radio stations are stored or if all 40 memory locations are full, the auto preset will stop.
NOTE
A Weak signal can affect the "Automatic Preset Storing function" efficiency. Adjust the antenna for the best reception, and a more efficient search.
5.Press the SAVE button on the remote control to store frequency in selected preset location.
6.Repeat steps
Retrieving preset stations
1.Press TUNER on the remote control to select tuner mode.
2.Press the PRESET buttons on the main unit or the PR
or PR buttons on the remote control to select the preset station.
Manual preset
1.Select FM or AM band by pressing TUNER repeatedly.
2.Tune to the radio station to be stored. (see "Manual tuning" on page 16 above for details)
17