Technicolor - Thomson DPL580HT Care and Maintenance, Cleaning, Important battery information

B_DPL580 EN 4/16/04 12:53 PM Page 29

Care and Maintenance

Disconnect the audio system from the power source before performing any maintenance.

Cleaning

Clean the exterior of the system using a soft dust cloth.

Important battery information

•Remove the batteries to avoid leakage if you do not use your remote control for more than one month.

•Discard leaky batteries immediately as leaking batteries may cause skin burns or other personal injuries.

•Dispose of batteries in the proper manner, according to provincial and local regulations.

•Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if all batteries are not replaced at the same time, if disposed of in fire, or if an attempt is made to charge a battery not intended to be recharged.

Safety precautions

•Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician.

•Never operate this product with the cabinet removed.

•Do not touch the player with wet hands. If any liquid enters the player cabinet, take the player to a trained technician for inspection.

•The apparatus shall not be exposed to dripping and splashing.

Headset safety

•Do not play your headset at a high volume. Hearing experts warn against extended high-volume play.

•If you experience a ringing in your ears, reduce volume or discontinue use.

•You should use extreme caution or temporarily discontinue use in potentially hazardous situations.

•Even if your headset is an open-air type designed to let you hear outside sounds, don’t turn up the volume so high that you are unable to hear what is around you.

Don’t infringe

This product should only be used for the purposes for which it is sold, that is, entertainment, violating no copyright law. Any attempts to use this product for which it is not intended is unlawful and therefore not condoned by Thomson.

Equipment Specifications:

AMPLIFIER SECTION:

RMS Output Power: Dolby Digital Mode with 10% Total Harmonic Distortion

Front and Rear Channels: 55 Watts each Channel (1KHz,
6 Ohm)
Center Channel: 90 Watts (1KHz, 3 Ohm)	EN
Subwoofer Channel: 90 Watts (100Hz, 3 Ohm)
Total RMS Output Power, Dolby Digital mode : 400 W
DIN Output Power: Dolby Digital Mode with 10% Total
Harmonic Distortion
Front Channels (L and R ): 44 Watts per Channel (1KHz,
6 Ohm)
Rear Channels (L and R): 44 Watts per Channel (1KHz, 6
Ohm)
Center Channel: 90 Watts (1KHz, 3 Ohm)
Subwoofer Channel: 90 Watts (100Hz, 3 Ohm)
DIN Output Power: Dolby Digital Mode with 1% Total
Harmonic Distortion
Front Channels (L and R ): 34.1 Watts per Channel
(1KHz, 6 Ohm)
Rear Channels (L and R): 34.1 Watts per Channel (1KHz,
6 Ohm)
Center Channel: 65 Watts (1KHz, 3 Ohm)
Subwoofer Channel: 65 Watts (100Hz, 3 Ohm)
Muting Attenuation: 65dB
Frequency Response: 20kHz /-3dB, 1kHz ref.
Subwoofer Frequency Response: 10 Hz / -3db, 80Hz ref.
DIN 1kHz FL / FR STEREO mode : 45W x2 @ 6ohm <10%
THD
Signal to Noise Ratio: 65dB (Dolby digital mode)
Video Signal to Noise Ratio from 40 dB to 60dB
VIDEO SECTION:
Input ( Sensitivity/ Impedance ):1Vp-p/ 75ohm
Output (Level/ Impedance): 1Vp-p/ 75 ohm
Frequency Response: 10Hz to 6MHz at +/- 3dB
AM TUNER SECTION:
Frequency Response: 2kHz +/-6dB, 1kHz ref.
Usable Sensitivity: 800uV/m @ S/N 20dB
Signal to Noise: 38dB
IF Rejection: 35dB
FM TUNER SECTION:
Frequency Response: 15kHz +/-3dB, 1kHz ref.
Quieting: 24dBu
Signal to Noise: 60dB(stereo) / 65dB(mono)
IF Rejection: 50dB
Dimensions (H x W x D mm) :
Unit - 95 x 430 x 355
Front and Surround Speakers - 156 x 80 x 90
Center Speaker - 68 x 248 x 85
Subwoofer - 316 x 160 x 355

25