Pioneer VSX-815-S/-K, VSX-915-S/-K Other connections Chapter, Second Zone speaker B setup

Page 71

Other connections

Chapter 12:

Other connections

12

English

Caution

•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system.

•Be careful not to allow any contact between speaker wires from different terminals.

•You can use speakers with a nominal impedance between 6–16Ω(please see Switching the speaker impedance on page 81 if you plan to use speakers with an impedance of less than 8Ω).

Second Zone speaker B setup

VSX-915 model only

After selecting SB 2ND Z in Surround back speaker setting on page 46, you can use the speakers connected to the (surround back) B speaker terminals on the rear panel to listen to stereo playback in another room. See Switching the speaker system below for the listening options with this setup.

1Connect a pair of speakers to the surround back speaker terminals on the rear panel.

Connect them the same way you connected your speakers in Connecting the speakers on page 22. Make sure to review Hints on speaker placement on page 23 when placing the speakers in another room.

2Select SB 2ND Z from the ‘SB. SYSTEM’ menu.

See Surround back speaker setting on page 46 to do this.

Switching the speaker system

If you selected SB 2ND Z in Surround back speaker setting on page 46, three speaker system settings are possible using the SPEAKERS button. If you selected SB NORM. or SB BIAMP, the speaker system is fixed as SP A or SP AB (respectively). The options

below are for the SB 2ND Z setting only.1

•Use the SPEAKERS button on the front panel to select a speaker system setting.

FL DIMMER

INPUT

SPEAKERS

EXTENDED

ACOUSTIC

 

 

ATT

MODE

EQ

 

 

 

TUNING

TUNER

 

QUICK

SYSTEM

RETURN

BAND

/STATION

EDIT

TONE

SETUP

SETUP

MULTI JOG

Press repeatedly to choose a speaker system option:

• SP A – Sound is output from the speakers connected to the A speaker terminals (multichannel playback is possible).

• SP B – Sound is output from the two speakers connected to speaker system B (only stereo playback is possible).

Deutsch Français Italiano Nederlands Español

Note

1 • The subwoofer output depends on the settings you made in Speaker setting on page 51. However, if SP B is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).

•Depending on the Surround back speaker setting on page 46 output from the surround back pre-out terminals may change.

•All speaker systems (except SB 2ND Z connections) are switched off when headphones are connected.

71

En

Page 70 Page 72
Image 71
Page 70 Page 72
Contents VSX-515-S/-KVSX-815-S/-KVSX-915-S/-K Risk of Electric Shock Do not Open Voltage selectorContents Other connections Other SettingsControlling the rest of your system VSX-515 Controlling the rest of your system VSX-815/915Loading the batteries Before you startBefore you start Chapter Introduction to home theaterIllustration shows the VSX-815/915 model Installing the receiverBefore you start VentilationHook up your DVD player Minute guideMinute guide Chapter Listening to Surround SoundSurround speakers This receiver Powered02 5 minute guide Connect your speakersFor more on this.3 Play a DVD, and adjust the volume to your likingMinute guide 0ch 3.0ch 0ch4.0ch 0ch 5.0ch 02 5 minute guide Using the Quick Setup1ch Illustration shows the VSX-915 model Quick surround sound setupQuick surround sound setup Chapter Above VSX-515 left and VSX-815/915 rightEnter Quick surround sound setupFollowing options then cursor up/down to check the settings Select Check OK in the display then pressOther problems when using the Auto Mcacc Setup Making cable connections Connecting upConnecting up Chapter VSX-815/915 model only Connecting upVideo cables Component video cablesIllustration shows the VSX-915, but Connecting up Connecting a DVD player and TVUse an optical cable for the connection.4 This receiver Connecting the multichannel analog outputsAudio and Video inputs on this receiver.2 About the WMA9 Pro decoder Connecting other audio componentsThis receiver Connecting other video componentsComp 1 DVD Comp 2 TV Comp 3 DVR Using the component video jacksConnecting to the front panel video terminal If you connect any source component toAM loop antenna Connecting up Connecting antennasUsing external antennas FM wire antennaConnecting up Connecting the speakers VSX-815 model only Hints on speaker placementB speaker systems View of 7.1 channel speaker setup Overhead view of speaker setupPioneer products Connecting up Operating other Pioneer componentsSTANDBY/ON Controls and displaysControls and displays Chapter Front panelControls and displays Controls and displays Display Receiver Remote control VSX-815/915Midnight LoudnessDTV Menu AccessSR+ TOP MenuMPX DTV ON/OFFDTV Info Tuner DisplayEFFECT/CH SEL SetupPreset ResetSTEREO/DIRECT Controls and displays Remote control VSX-515System Setup and Component control buttons Master Volume +Channel + Operating range of remote control unitVolume + DisplayListening in surround sound Listening to your systemListening to your system Chapter Auto playbackSee which you like.2 Using the Advanced surround effectsListening to your system Press EFFECT/CH SEL again to adjust other settings Dolby Pro Logic IIx Music settingsNeo6 Music settings Use the +/- buttons to adjust the settingImage Listening in stereoListening with Acoustic Calibration EQ Listening to your system Choosing the input signal Select a surround back channel option Extended modeUsing the surround back channel Press Extended Mode front panel toVSB OFF.1 Switched offEnhancing dialog Using the tone controlsPress Tone to select the frequency you want to adjust Press Dialog E to switch dialog enhancement on or offVSX-815/915 model Listening to your system Playing other sourcesVSX-515 model Press Sleep repeatedly to set the sleep time Listening to your system Using the sleep timer30 min OffPress Return to confirm and exit the current menu System Setup menuSystem Setup menu Chapter Surround back speaker settingManual Mcacc speaker setup System Setup menuFine Channel Distance Fine Channel LevelAcoustic Calibration EQ Setting the Acoustic Calibration EQ automaticallySettings Copying your Acoustic Calibration EQ Right to check the settings Setting the Acoustic Calibration EQ manuallyChecking your Acoustic Calibration EQ settings Channel you want, usingSpeaker setting System Setup menu Manual speaker setupChannel level When you’re finished, press ReturnDefault setting 100Hz Crossover networkSpeaker Distance Confirm your selected setup optionWhen you’re finished, press Return Tip Select ‘SP DISTN.’ from the SP Setup menuListening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationPress Enter Using the tunerSaving station presets Display shows ST. MEMORY, then a blinking memory classChanging the frequency step Naming station presetsListening to station presets Source as for the recorder.1 Making recordingsMaking recordings Chapter Making an audio or a video recordingControlling the rest of your system Chapter Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemControlling the rest of your system Direct function Clearing all the remote control settingsSelect Channel VolumeControlling the rest of your system Controls for TVs InputDisc Controlling the rest of your systemControls for other components Enter Guide Manufacturer Code Controlling the rest of your system Preset Code ListOn digital STB DVD RecorderUse Cursor left/right to select Preset then press Enter Remote LCD display shows SetupLCD display shows OK.2 Programming signals from other remote controlsUse cursor left/right to select Learn then press Enter Press and hold the button to be erased for two seconds Erasing all of the remote control presetsPress the Receiver button to exit and store the operations Use cursor left/right to select Erase then press EnterUse cursor left/right to select Direct F then press Enter Confirming preset codesSelect Button must be pressed twice to take effect Cassette deck Stops playback on some models, pressing this whenSHIFT+ + CH+ HDD Shift+ CH Other connections Chapter Second Zone speaker B setupSwitching the speaker system Other connectionsBi-amping your front speakers Bi-wiring your speakersSelect the SB Biamp setting from the ‘SB. SYSTEM’ menu Other connectionsPioneer plasma display Other connections Connecting additional amplifiersDVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayAssigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuDual Mono Setup Other SettingsOther setup menu Dynamic Range Control SetupSR+ Setup for Pioneer plasma displays LFE Attenuator SetupAdditional information Chapter TroubleshootingAdditional information Plus Refer to Using the surround back channel Extended mode onAdditional information See Operating other Pioneer components on Connecting the speakers onVSX-815/915 only The SR OK? shows in the display Additional information Resetting the main unitSwitching the speaker impedance Press System Setup to confirmVideo Section Additional information SpecificationsAmplifier section Audio sectionMiscellaneous Power cord cautionCleaning the unit AM Tuner SectionPioneer Corporation

VSX-815-S/-K, VSX-915-S/-K specifications

The Pioneer VSX-915-S/-K and VSX-815-S/-K are part of Pioneer's renowned line of AV receivers that provide home theater enthusiasts with an impressive range of features and technologies. These models are particularly recognized for their exceptional audio quality and versatility, making them ideal for both music lovers and movie enthusiasts alike.

One of the standout features of the VSX-915 is its Dolby TrueHD and DTS-HD Master Audio decoding capabilities, which allow users to experience high-definition audio quality that matches the latest in cinematic releases. This model is equipped with Pioneer's Multi-Channel Acoustic Calibration System (MCACC), enabling automatic speaker setup and optimization based on the room's acoustics. This technology ensures that listeners enjoy a balanced sound field, regardless of the room's layout.

The VSX-815 model, while slightly more compact, does not compromise on functionality. It retains essential features such as Dolby Digital EX and DTS 96/24 decoding, providing rich surround sound that enhances the home theater experience. The unit's direct energy HD amplification delivers robust audio output while maintaining low distortion levels, ensuring that high-frequency details are preserved without sacrificing power.

Both models include a robust selection of inputs and outputs, including HDMI connectivity, which supports 1080p video pass-through. This makes it compatible with a variety of modern devices, from Blu-ray players to gaming consoles. The VSX-915 also supports multi-zone audio distribution, allowing users to enjoy different sources in different rooms, which adds a layer of convenience for those who like to entertain.

Pioneer's proprietary technologies, such as the Phase Control, help in enhancing sound clarity, providing a more coherent audio experience. Additionally, both receivers feature a user-friendly graphical user interface (GUI) for easy navigation through settings and options.

In terms of design, both the VSX-915-S/-K and VSX-815-S/-K feature an elegant and functional aesthetic that fits well in any home entertainment setup. With their build quality and attention to detail, they are built to last while delivering superior sound quality.

In summary, the Pioneer VSX-915-S/-K and VSX-815-S/-K represent an excellent investment in high-quality home audio experiences, combining advanced technologies and user-friendly features that cater to both casual listeners and dedicated audiophiles.
Top Page Image Contents