Pioneer VSX-915-S/-K, VSX-815-S/-K Other Settings, Other setup menu, Dynamic Range Control Setup

Page 76

13Other Settings

2Select the number of the component

video input to which you’ve connected your video component.

Use

(cursor left/right) to do this.

•The numbers correspond with the numbers beside the inputs on the back of the receiver.

3Select the component that corresponds with the one you connected to that input.

Use the (cursor up/down) buttons to select between DVD, TV, DVR or OFF.

•Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver.

•If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver's COMPONENT VIDEO MONITOR OUT jacks.

4 When you're finished, press RETURN.

•DUALMONO – Isolate one channel when listening to discs with dual mono encoding (see Dual Mono Setup below).

•LFE ATT – Set the attenuator level for the LFE channel (see LFE Attenuator Setup below).

•SR+ (VSX-815/915 model only) – Specify how you want to control your Pioneer plasma display (see SR+ Setup for Pioneer plasma displays below)

3Make the adjustments necessary for each setting, pressing RETURN to confirm after each menu.

Dynamic Range Control Setup

• Default setting: OFF

This setting specifies the amount of dynamic range adjustment to Dolby Digital and DTS movie soundtracks. You may want to use this when listening to surround sound at low volumes.

1 Select DRC from the OTHER setup menu.

The Other setup menu

The Other menu is where you can make customized settings to reflect how you are using the receiver.

1Select OTHER from the System Setup menu.

See Making receiver settings from the System Setup menu on page 46 for more on this.

2 Use (cursor left/right) to select the

setting you want to adjust then press ENTER. If you are doing this for the first time, you may want to adjust these settings in order:

•DRC – Specify the amount of dynamic range adjustment to Dolby Digital soundtracks (see Dynamic Range Control Setup below).

2 Use (cursor up/down) to choose the setting that you want.

•OFF – No dynamic range adjustment (use when listening at higher volume).

•MID – Mid setting.

•MAX – Dynamic range is reduced (loud sounds are reduced in volume while quieter sounds are increased).

3 When you're finished, press RETURN.

Dual Mono Setup

•Default setting: CH1

You can specify how dual mono encoded Dolby Digital soundtracks should be played. Dual mono is not widely used, but is sometimes necessary when two languages need to be sent

to separate channels.1

Note

1 This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

76

En

Page 75 Page 77
Image 76
Page 75 Page 77
Contents VSX-515-S/-KVSX-815-S/-KVSX-915-S/-K Voltage selector Risk of Electric Shock Do not OpenContents Other Settings Controlling the rest of your system VSX-515Controlling the rest of your system VSX-815/915 Other connectionsBefore you start Before you start ChapterIntroduction to home theater Loading the batteriesInstalling the receiver Before you startVentilation Illustration shows the VSX-815/915 modelMinute guide Minute guide ChapterListening to Surround Sound Hook up your DVD playerThis receiver Powered 02 5 minute guideConnect your speakers Surround speakersMinute guide Play a DVD, and adjust the volume to your likingFor more on this.3 1ch 02 5 minute guide Using the Quick Setup0ch 3.0ch 0ch4.0ch 0ch 5.0ch Quick surround sound setup Quick surround sound setup ChapterAbove VSX-515 left and VSX-815/915 right Illustration shows the VSX-915 modelQuick surround sound setup Following options then cursor up/down to check the settingsSelect Check OK in the display then press EnterOther problems when using the Auto Mcacc Setup Connecting up Chapter Connecting upMaking cable connections Connecting up Video cablesComponent video cables VSX-815/915 model onlyConnecting up Connecting a DVD player and TV Illustration shows the VSX-915, butAudio and Video inputs on this receiver.2 Connecting the multichannel analog outputsUse an optical cable for the connection.4 This receiver Connecting other audio components About the WMA9 Pro decoderConnecting other video components This receiverUsing the component video jacks Connecting to the front panel video terminalIf you connect any source component to Comp 1 DVD Comp 2 TV Comp 3 DVRConnecting up Connecting antennas Using external antennasFM wire antenna AM loop antennaConnecting up Connecting the speakers B speaker systems Hints on speaker placementVSX-815 model only Overhead view of speaker setup View of 7.1 channel speaker setupConnecting up Operating other Pioneer components Pioneer productsControls and displays Controls and displays ChapterFront panel STANDBY/ONControls and displays Controls and displays Display Remote control VSX-815/915 MidnightLoudness ReceiverAccess SR+TOP Menu DTV MenuDTV ON/OFF DTV InfoTuner Display MPXSetup PresetReset EFFECT/CH SELControls and displays Remote control VSX-515 STEREO/DIRECTMaster Volume + System Setup and Component control buttonsOperating range of remote control unit Volume +Display Channel +Listening to your system Listening to your system ChapterAuto playback Listening in surround soundListening to your system Using the Advanced surround effectsSee which you like.2 Dolby Pro Logic IIx Music settings Neo6 Music settingsUse the +/- buttons to adjust the setting Press EFFECT/CH SEL again to adjust other settingsListening with Acoustic Calibration EQ Listening in stereoImage Listening to your system Choosing the input signal Extended mode Using the surround back channelPress Extended Mode front panel to Select a surround back channel optionSwitched off VSB OFF.1Using the tone controls Press Tone to select the frequency you want to adjustPress Dialog E to switch dialog enhancement on or off Enhancing dialogVSX-515 model Listening to your system Playing other sourcesVSX-815/915 model Listening to your system Using the sleep timer 30 minOff Press Sleep repeatedly to set the sleep timeSystem Setup menu System Setup menu ChapterSurround back speaker setting Press Return to confirm and exit the current menuSystem Setup menu Manual Mcacc speaker setupFine Channel Level Fine Channel DistanceSettings Copying your Acoustic Calibration EQ Setting the Acoustic Calibration EQ automaticallyAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Checking your Acoustic Calibration EQ settingsChannel you want, using Right to check the settingsSystem Setup menu Manual speaker setup Speaker settingWhen you’re finished, press Return Default setting 100HzCrossover network Channel levelConfirm your selected setup option When you’re finished, press Return TipSelect ‘SP DISTN.’ from the SP Setup menu Speaker DistanceUsing the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presetsDisplay shows ST. MEMORY, then a blinking memory class Press EnterListening to station presets Naming station presetsChanging the frequency step Making recordings Making recordings ChapterMaking an audio or a video recording Source as for the recorder.1Setting the remote to control other components Selecting preset codes directlyControlling the rest of your system Controlling the rest of your system ChapterClearing all the remote control settings Controlling the rest of your system Direct functionVolume Controlling the rest of your system Controls for TVsInput Select ChannelControls for other components Controlling the rest of your systemDisc Enter Guide Controlling the rest of your system Preset Code List On digital STBDVD Recorder Manufacturer CodeRemote LCD display shows Setup Use Cursor left/right to select Preset then press EnterUse cursor left/right to select Learn then press Enter Programming signals from other remote controlsLCD display shows OK.2 Erasing all of the remote control presets Press the Receiver button to exit and store the operationsUse cursor left/right to select Erase then press Enter Press and hold the button to be erased for two secondsConfirming preset codes Use cursor left/right to select Direct F then press EnterSelect SHIFT+ Stops playback on some models, pressing this whenButton must be pressed twice to take effect Cassette deck + CH HDD Shift+ CH+ Second Zone speaker B setup Switching the speaker systemOther connections Other connections ChapterBi-wiring your speakers Select the SB Biamp setting from the ‘SB. SYSTEM’ menuOther connections Bi-amping your front speakersOther connections Connecting additional amplifiers Pioneer plasma displayUsing the SR+ mode with a Pioneer plasma display Pioneer plasmaDisplay DVD player Satellite receiver, etcOther Settings Other Settings ChapterInput Assign menu Assigning the digital inputsOther Settings Other setup menuDynamic Range Control Setup Dual Mono SetupLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysAdditional information TroubleshootingAdditional information Chapter Additional information Refer to Using the surround back channel Extended mode onPlus VSX-815/915 only The SR Connecting the speakers onSee Operating other Pioneer components on Additional information Resetting the main unit Switching the speaker impedancePress System Setup to confirm OK? shows in the displayAdditional information Specifications Amplifier sectionAudio section Video SectionPower cord caution Cleaning the unitAM Tuner Section MiscellaneousPioneer Corporation

VSX-815-S/-K, VSX-915-S/-K specifications

The Pioneer VSX-915-S/-K and VSX-815-S/-K are part of Pioneer's renowned line of AV receivers that provide home theater enthusiasts with an impressive range of features and technologies. These models are particularly recognized for their exceptional audio quality and versatility, making them ideal for both music lovers and movie enthusiasts alike.

One of the standout features of the VSX-915 is its Dolby TrueHD and DTS-HD Master Audio decoding capabilities, which allow users to experience high-definition audio quality that matches the latest in cinematic releases. This model is equipped with Pioneer's Multi-Channel Acoustic Calibration System (MCACC), enabling automatic speaker setup and optimization based on the room's acoustics. This technology ensures that listeners enjoy a balanced sound field, regardless of the room's layout.

The VSX-815 model, while slightly more compact, does not compromise on functionality. It retains essential features such as Dolby Digital EX and DTS 96/24 decoding, providing rich surround sound that enhances the home theater experience. The unit's direct energy HD amplification delivers robust audio output while maintaining low distortion levels, ensuring that high-frequency details are preserved without sacrificing power.

Both models include a robust selection of inputs and outputs, including HDMI connectivity, which supports 1080p video pass-through. This makes it compatible with a variety of modern devices, from Blu-ray players to gaming consoles. The VSX-915 also supports multi-zone audio distribution, allowing users to enjoy different sources in different rooms, which adds a layer of convenience for those who like to entertain.

Pioneer's proprietary technologies, such as the Phase Control, help in enhancing sound clarity, providing a more coherent audio experience. Additionally, both receivers feature a user-friendly graphical user interface (GUI) for easy navigation through settings and options.

In terms of design, both the VSX-915-S/-K and VSX-815-S/-K feature an elegant and functional aesthetic that fits well in any home entertainment setup. With their build quality and attention to detail, they are built to last while delivering superior sound quality.

In summary, the Pioneer VSX-915-S/-K and VSX-815-S/-K represent an excellent investment in high-quality home audio experiences, combining advanced technologies and user-friendly features that cater to both casual listeners and dedicated audiophiles.
Top Page Image Contents