Revolabs 880 MXP setup guide

Page 1

Revolabs Fusion™ Wireless Microphone System- Tandberg 880 MXP Setup Guide

NOTES AND CAUTIONS:

This setup guide will guide you through the steps needed to properly connect a Revolabs Fusion System to a Tandberg 880 MXP video codec.

1.Connecting the Cables

2.Configuring the 880 MXP Video Codec

Note: It is important to carefully follow these instructions in order and completely. Otherwise your Fusion System and/or the video codec may not function properly. Please read through these instructions completely before proceeding. Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1.Revolabs Fusion 4 or 8 microphone system

2.Tandberg 880 MXP video codec

3.QTY 1 XLR male to XLR male cable

4.Qty 2 RCA-RCA male cable

5.Amplified speakers

NOTE: IMAGES OF SET UP SCREENS ARE DEFAULT SETTINGS FROM TANDBERG AND ARE PART OF THE TANDBERG MXP ADMINISTRATORS GUIDE © MAY 2008

Image 1
Contents Page Connecting the Cables Go to Audio Settings Configuring the 880 MXP Video CodecEnable MIC 1 Echo Canceller on