Revolabs 880 MXP setup guide Connecting the Cables

Page 2

Connecting the Cables

CONNECTING A REVOLABS FUSION TO TANDBERG 880 MXP VIDEO CODEC

1.Connect a Male RCA-RCA audio cable between the “Conf. In” port on the Fusion and the “VCR 1” port on the 880 MXP.

2.Connect a Male XLR audio cable between the “Mic Conf. Out” port on the Fusion and the “Mic 1” port on the 880 MXP.

3.Connect a Male RCA audio cable between the “Room Out” port on the Fusion and the Speakers.

Note: The speakers used for audio and video conferencing with this configuration must be connected to the Fusion for proper echo cancelation.

Image 2
Contents Page Connecting the Cables Configuring the 880 MXP Video Codec Go to Audio SettingsEnable MIC 1 Echo Canceller on