Revolabs setup guide Configuring the 880 MXP Video Codec, Go to Audio Settings

Page 3

Configuring the 880 MXP Video Codec

CONFIGURING THE AUDIO MENUS OF THE 880 MXP VIDEO CODEC

1.Go to AUDIO SETTINGS

2.Select INPUTS

3.Confirm that MIC 1 is ON

4.Adjust the audio Input Type Level if necessary (recommend +0dB)

5.Speak into the Revolabs microphones that are connected to MIC 1. The audio meter should peak at about 5dB for normal speech.

Image 3
Contents Page Connecting the Cables Go to Audio Settings Configuring the 880 MXP Video CodecEnable MIC 1 Echo Canceller on