Contents | Trane RX-212 specification

General Description	2
Features	2
Front Panel, Input Section	3
Front Panel, Output Section	4
Meter Panel	5
Rear Panel (RX-208)	6
Rear Panel (RX-212, RX-216)	7
Connection Examples	8~10
How to use "channel patching" accessory jack	11
How to get a good mixing	12
Channel and Graphic Equalizers	13~14
General Specification	14
Input & Output Specifications	15
Characteristic Diagrams	16
Block Diagram	17
Level Diagram	18
Dimensional Diagrams	18

Precautions

1.Each model of the RX-208, RX-212 and RX-216 has two versions, 120V AC operation only and 220/240V AC operation with a voltage selector. The voltage selector on the rear panel of the 220/240V version should be check for proper setting prior to operation as improper setting causes trouble. The voltage selector is set for 240V operation at the factory.

VOLTAGE SELECTOR

AC220V AC240V

2. Power Switch

The power switch should be on after all connections have been completed.

3.XLR (Cannon) Connectors

The connectors are wired in the following manner: Pin 1 is ground (shield); pin 2 is cold (low, minus); pin 3 is hot (high, plus).

4.Description of components and functions on the RX-208,RX-212 and RX-216.In our Operating and Instruction Manual explanation of components and functions is made according to our usage for them.

- 1 -