Control Elements
The control range is 0% to 100%. The 2ND HARMONIC encoder is equipped with
If the need arises to make the harmonics more audible use the DENSITY control (see DENSITY, 7) to increase their loudness.
3rd Harmonic | 6 | The 3RD HARMONIC encoder controls the intensity of the added |
third harmonics which are being generated above the adjusted |
highpass frequency (see FREQUENCY, 3).
The third harmonics are odd harmonics which carry brilliance but also sharpness and aggressiveness. A good combination of even and odd harmonics is the key to a natural sounding top- end.
The control range is 0% to 100%. The 3RD HARMONIC encoder is equipped with
If the need arises to make the harmonics more audible use the DENSITY control (see DENSITY, 7) to increase their loudness.
Diagram 3:
3RD HARMONIC
The illustration shows the FFT spectrums of the odd harmonics for a measuring signal of 3kHz.
Diagram 4:
If two frequencies are fed into the Spectralizer (here
3and 4 kHz) also the diffe- rential tone (here 7 kHz) are being produced
All measurements at:
FREQUENCY 1kHz
DENSITY 0
MIX100%
10 | Spectralizer |