System Description, System Features | Telex N/DYM SERIES specs

ENGLISH

2. System Description

The Electro-Voice N/DYM Wireless is a series of 10 channel frequency agile UHF wireless systems that combine EV’s legendary quality and reliability with high value. The N/DYM Series transmitters and receivers operate in the UHF frequency range on one of ten channels between 800 and 814 MHz. The well-designed audio circuitry ensures excellent signal-to-noise ratio with accurate sound quality.

System Features

•10 Channel Frequency Agile UHF system operation.

•Featuring “ClearScanTM” which makes for quick and easy system setup.

•Handheld transmitters feature EVs’ N/DYM mic elements, for superior sound quality.

•True-diversity system with Secure-PhaseTMensures maximum range and freedom from interference.

•Well-designed companding and audio circuitry insures high signal-to-noise ratio and excellent sound quality.

•Choice of two handheld and four bodypack systems, including a system specifically for guitar.

•Permanently attached antennas make setup quick and easy.

•Receivers may be rack-mounted with optional kit.

•Audio output via 3-pin XLR-type balanced mic level and 1/4-inch unbalanced line level connectors.

3Detailed Setup Instructions

3.1Receiver Setup & Operation

1.Place the receiver where there is a clear line of sight to the area where the transmitter will be used. Rotate the receiver’s antennas and separate them 90 degrees (see Figure 1).

2.Connect the power supply cord to the receiver. Plug the power supply into an AC outlet Confirm that the receiver is ON by checking for the lit red/green Diversity light and channel display on the front panel.

NOTE: Upon power-up, the receiver will return to the channel it was set to when it was turned off.

CAUTION: Please make sure that the AC adapter is the correct voltage for your local requirements.

3ClearScanTM: The N/DYM Wireless system fea- tures ClearScanTM. ClearScanTM automates the process of finding a clear channel to use in setup of your N/DYM Wireless system. To use ClearScanTM, depress and hold down the set but- ton for 3 seconds. When the channel display begins flashing release the set button. The receiv- er is now searching for a clear frequency, by measuring the RF energy present on each chan- nel. The entire process will take about 5 seconds.

While scanning, the channel display will show the channel number being scanned. When ClearScanTM is complete, the display will stop flashing and it will display the number of the chan- nel recommended for use.

NOTE: If using more than one N/DYM system, set up ONE system at a time. Turn on the transmitter for the first system, before using ClearScanTM to set up the second. Please see the “Guideline/ Recommendations for best performance” section to setup more than two systems.

4.Setting the channel. Changing the channel on the receiver can also be done manually. By momentarily depressing the Set button, the channel number is increased by one.

NOTE: When the system is turned off, the channel number is saved in non-volatile memory. When the receiver is turned on, it will return to the same channel number.

N/DYM SERIES specifications

Telex N/DYM SERIES is a line of professional dynamic microphones designed specifically for broadcast, recording, and live sound applications. Renowned for their high-quality audio capture and robust build, these microphones are a staple in the audio engineering world and are favored by artists, sound engineers, and broadcasters alike.

One of the standout features of the Telex N/DYM SERIES is its use of neodymium magnet technology. This allows for a higher output level and improved sensitivity compared to traditional dynamic microphones. Neodymium magnets provide an efficient transduction mechanism, enabling the microphone to capture a wider frequency range with great clarity and detail. The result is a microphone that can accurately reproduce vocals and instruments with remarkable fidelity.

Another key characteristic of the N/DYM SERIES is its cardioid polar pattern. This design helps to minimize ambient noise and feedback by focusing on sound coming from directly in front of the microphone while rejecting sounds from the sides and rear. This makes it particularly useful in live environments where stage noise and audience interference can be problematic, allowing performers to deliver their sound without unwanted distractions.

Durability is also a major focus of the Telex N/DYM SERIES. Built to withstand the rigors of professional use, these microphones feature a rugged construction that can handle the inevitable wear and tear of on-stage performances. The sturdy grill and housing help protect the internal components, ensuring that the microphone maintains its performance and reliability over time.

Furthermore, the N/DYM SERIES microphones often come equipped with advanced internal shock-mount systems. These systems reduce handling noise and vibrations that could otherwise color the sound. This is crucial in both studio and live settings where clarity is of paramount importance.

The versatility of the Telex N/DYM SERIES is another factor that makes it a popular choice among audio professionals. Whether it’s used for vocal performances, acoustic instruments, or amplified sound sources, the microphone adapts well to a variety of applications. The series ensures that users can achieve outstanding results across different scenarios, from studio recordings to live gigs.

In summary, the Telex N/DYM SERIES combines high-quality neodymium technology, a cardioid polar pattern, rugged construction, and innovative design features to create microphones that excel in both live and studio settings. This comprehensive range of characteristics makes the N/DYM SERIES a reliable and effective choice for those seeking exceptional audio quality and durability in their microphone applications.