HP RM500SL manual FastFacts 5.3 Networking setup

5.3Networking setup

Check 5.2: Networking requirements and connect the RM500SL to your network.

1)Press <Setup> then highlight and <PICK> [Network]

2)In the Network poster, highlight and <PICK> [Enable networking].

3)If your network supports automatic address assignment (DHCP), highlight and <PICK> [Obtain automatically]. Highlight and <PICK> [Test connection].

4)For manual configuration, highlight and <PICK> [Obtain manually]. Then highlight each of the 4 boxes in each row and highlight and <PICK> the numbers, provided by your network administrator, from the drop-down lists.

5)Highlight and <PICK> [Test connection]. The RM500SL will prompt you for an IP address of a computer or router on your network. In a single PC-to- RM500SL network, this is the IP address of the PC you are connecting to.

FastFacts 5.3: Networking setup

0611 RM500SL User’s Guide Version 2.8 Page 23