HP RM500SL manual FastFacts 18.6 Fitting to targets for loud sounds

18.6 Fitting to targets for loud sounds

4)Select REAR 2 & set stimulus to [MPO]. In S-REM mode, a 90 dB tone sweeps continuously. In REM mode, the tone sweeps when you press <Continue>.

5)In S-REM mode, adjust high-level gain and/or output limiting (e.g.,MPO, PC) so the curve matches the + REAR90 targets (DSL) or approaches but doesn’t

exceed the ∗ RESR targets (NAL-NL1) at all frequencies. Press <Continue> to record the MPO curve. In REM mode, advise the client to point to the screen if a sound becomes too loud during the test (see 10.5: Max TM SPL setup). Press <Continue> to run and record a single sweep. Adjust the gain and output for loud sounds as for S-REM, factoring in client response. Repeat as necessary.

FastFacts 18.6: Fitting to targets for loud sounds

0611 RM500SL User’s Guide Version 2.8 Page 81