HP RM500SL manual Internal printer paper loading, To load a new roll of paper

6.2Internal printer paper loading

On-screen instructions on paper replacement are provided if you try to print to the internal printer when it is out of paper or when the paper lever has been raised.

To load a new roll of paper:

1Lift the printer head using the small black lever to the left of the printer.

2Press the <Print> key for on-screen instructions.

3Remove the empty spool from the paper tray and any remaining paper from the printer.

4Hold a new roll in front of the paper tray with paper feeding from the top of roll.

5Insert the paper’s leading edge into the lower slot at rear of tray.

6Feed the paper by highlighting the on- screen ‘Paper Feed’ button and pressing <PICK>.

7Advance the paper until it comes out of the upper slot.

8Place the roll in the paper tray and advance another 10” (25 cm) of paper.

9Lower the printer head using the small black lever. Press <Continue> to print or <Cancel> to cancel the print job.

If nothing shows on the paper when you press <Print> and the paper is coming out –check that the glossy side is up as it comes out of the printer.

Thermal paper may darken if stored for prolonged periods at elevated temperatures and lose contrast if subjected to light. Keep long-term supplies and printouts in a cool dry place out of direct light.

FastFacts 6.2: Internal printer paper loading

0611 RM500SL User’s Guide Version 2.8 Page 26